Tender For Repair To Wooden Furniture At Furniture Yard Fort William Under Ge (C) Kolkata, kolkata-West Bengal

Repair To Wooden Furniture At Furniture Yard Fort William Under Ge (C) Kolkata; 1 Note:- Removal of following existing unserviceable wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing, wedging, glueing, providing hinges, applying putty to level thesurface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall beFrench polished with high gloss finish in light Walnut shade ,after properly cleaned and smoothened the surface.Top shall be 18 mm thick exterior grade pre-laminated particle board one side laminated in light Wallnut shade or as approved by GE,duly fixed with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of particle board : Century/Archid /Green/Actiontesa. All kind of work will be executed where the furniture exist in different User Units of GE(Central) including BSOs Furniture Yard at BMC, and office hours only as directed by Engineer-in-Charge (Note applicable for item Srl No-1.01 to 20.05) 2 Bed hard:FD-246: Top shall be 12 mm thick BWR grade plywood.Make-Archidply/Century Ply/ Greenply. 3 Foot Rest as per drg. 4 Head Rest as per drg. 5 Stiffener as per drg. 6 Long Rail as per drg. 7 M&L for French polish with high gloss finish in light Walnut shade after properly cleaned and smoothened the surface by scratching the entire wooden pallets ,filling putty to the bore holes where ever required. 8 Chair diningFD-279:- Back rest. 9 Rear legs. 10 Front legs. 11 Leg stiffner. 12 Rails. 13 Nylon Buffers 20mm 14 As per item No - 1.06 but for chair dining. 15 Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs. 16 Chair Easy FD-229:- Rear Legs/Front Legs. 17 Side rails for seat incl cane hole. 18 Rear/Front rails incl cane hole of legs. 19 Upper/lower rails for back rest incl holes. 20 Front/rear stiffeners. 21 Arm rest. 22 Nylon Buffers 20mm 23 As per item No - 1.06 but for chair easy. 24 Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs. 25 Chair writing FD-280:- Back rest. 26 Rear legs. 27 Front legs. 28 Leg stiffner. 29 Rails. 30 Arms. 31 Nylon Buffers 20mm 32 As per item No - 1.06 but for chair writing. 33 Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs. 34 Chair dining Officer FD/MAP-II/04 :- Back rest. 35 Rear legs. 36 Front legs. 37 Vertical stiffner. 38 Rails. 39 Stiffner. 40 Seat made of 12mmm thickBWR grade plywood over which 40 density foam 75mm thick shall be provided duly fixed with good quality tapestry cloth as approved by GE. 41 Nylon Buffers 20mm 42 As per item No - 1.06 but for chair dining MAP with Cushion. 43 Chair Dining FD/MAP-II/05 :- Back rest 44 Rear legs. 45 Front legs. 46 Leg stiffner. 47 Rails. 48 Seat PVC Perforated as per drg. 49 Stiffner between and parallel to fornt and back rail,rest on side rail. 50 Nylon Buffers 20mm 51 As pe item No- 1.06 bur for chair dining. 52 Sofa set 5 seater (3+1+1 with cushion) FD-281&FD/MAP-II/03:- Leg as per drg. 53 Wooden batten as per drg. 54 Arm as per drg. 55 Taking out old pressed /torn old cushions from Nos set and Supply 40 density thick foamcushion of size 21”x 22” x 4” duly fixed with the GM fabricas approved by GE. Cushion cover with marking cloth shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line). 56 Bearer as per drg. 57 As per item No - 1.06 but for sofa set 5 seater 58 Taking out old torn faded cushion cover from old cushions and S&F new cushion cover with marking cloth to the existing cushion. The cover of the cushion shall be GM fabric as approved by GE. Cushion cover shall be provided with good quality zip stitched on one edge of cushion cover with standard fitting. 59 Table bed side FD-276:- Top. 60 Shelf/bottom base of table bed side. 61 Side of table Bed side. 62 As per item No - 1.06 but for table bed side 63 Backply 6mm commercial. 64 Table dining 3 x 3 FD-291:- Top. 65 Side rails as per drg. 66 Legs as per drg. 67 Nylon Buffers 20mm 68 L-shape corner of flat iron 25mm wide 5mm thick 4 x 4 between legs and rail to be fixed with screw. 69 As per item No - 1.06 but for table dining 3 x 3. 70 Table dining 4 x 3 FD/MAP-II/03:- Top. 71 Long rails as per drg. 72 Legs as per drg. 73 L-shape corner of flat iron 5mm thick 4 x 4 between legs and rail to be fixed with screw. 74 Short rails as per drg. 75 Nylon Buffers 20mm 76 As per item No - 1.06 but for table dining 4 x 3. 77 Table dining 6 person FD-273 & FD/MAP-II/03:- Top. 78 Long rails as per drg. 79 Legs as per drg. 80 L-shape corner of flat iron 5mm thick 4 x 4 between legs and rail to be fixed with screw. 81 Short rails as per drg. 82 Nylon Buffers 20mm 83 As per item No - 1.06 but for table dininig 6 person. 84 Table dining 8 person FD-273:- Top. 85 Long rails as per drg. 86 Legs as per drg. 87 L-shape corner of flat iron 5mm thick 4 x 4 between legs and rail to be fixed with screw. 88 Short rails as per drg. 89 Nylon Buffers 20mm 90 As per item No - 1.06 but for table dining 8 person. 91 Table dressing ladies FD-251:- Back as per drg. 92 Bottom as per drg. 93 Top as per drg. 94 Legs as per drg. 95 Drawers as per drg. 96 Looking mirror of size 366 x 1220 mm and 5 mm thick .Make-Saint gobain ,Modi Float, Triveni Float Glass. 97 Nylon Buffers 20mm 98 As per item No - 1.06 but for table dressing ladies. 99 Book Case FD - 237:- Top as per drg. 100 Sides as per drg. 101 Bottom as per drg. 102 Shutters shall be fixed with SS Piano hinges and SS Knob/ handles as per drg 103 Back shall be 6mm thick BWR Gde Plywood as per drg. 104 Shelves as per drg 105 Legs as per drg 106 Nylon Buffers 20mm 107 As per item No - 1.06 but for Book Case. 108 Side Board FD-1112- Top as per drg. 109 Side as per drg. 110 Bottom as per drg. 111 Shutters shall be fixed with SS Piano hinges and SS Knob/ handles and magnet cacher as per drg 112 Back as per drg. 113 Replacement of Top drawer shall be given five comrpment in equidistat space in front portion and one compartment in remaining portion. 114 Shelves as per drg 115 Drawer as per drg except top drawer. 116 Leg as per drg 117 Nylon Buffers 20mm 118 As per item no. 1.06 but for side board 119 Table writing FD-275:- Top as per drg. 120 Long rails as per drg. 121 Legs as per drg . 122 Short rails as per drg. 123 Long stiffener as per drg. 124 Drawers as per drg. 125 Shutter as per drg. 126 Adjacent sides of the box as per drg. 127 As per item No - 1.06 but for table writing. 128 Peg Table FD-384:- Top. 129 Long Rails. 130 Legs. 131 Stiffener. 132 Short Rails. 133 Nylon Buffers 20mm 134 As per item No - 1.06 but for peg table. 135 Table centre FD-274:- Top. 136 Long Rails as per drg. 137 Legs as per drg. 138 Stiffener as per drg. 139 Short Rails as per drg. 140 Nylon Buffers 20mm 141 As per item No - 1.06 but for table centre. 142 Teapoy wooden FD-278:- Top as per drg. 143 Long Rails as per drg. 144 Legs as per drg. 145 Stiffner as per drg 146 Short rails as per drg. 147 Nylon Buffers 20mm 148 As per item No - 1.06 but for teapoy wooden. 149 Trestle Store Room Wooden FD-86 :-Leg of size 100mm x 100mm in section at top and 75mm x 75mm in section at bottom x 405mm high. 150 Cross stiffeners size 660mm centre to centre 151 Top rails of size 100mm x 100mm x 2440mm in section. 152 Long stiffeners size 2440mm x 60mm x 100mm in section. 153 Two coats of creosote oil including cleaning preparation of old surface complete as per drg and directed by Engr-In-Charge.

INR 500 /-

INR 30 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB