Tender For Furniture For Students; The height of bed shall be 40cm ie from ground to horizontal frame. The bed shall be raised above the levet of horizontat frame at both the head end and tailend. I The overall size of 195cml x 100(w) x91.5 cm (height at head side) and 52.5 cm (height at Tail side) having mattress panel size of 190.5 cm (L) x 96.5cm (w) x 45 cm (H). Bed metalframe shall be made from MS/CRCA steelpipe. Raised head & tail frame consists of 4 cm dia x 0.12cm Thick as leg pipe& 2.5cm Dia x 0.12cm as supporting pipe3-4 on each side, having curved endi. Rectangular pipe 5 x 2.5 x 0.16cm as main frame pipe across the length (2 in no)and stiflning pipe (minimum 6nos). The top sheet shall be made 0.16cm thick CRCA sheet having perforation of dia 0.5 mm with welded to the struclure ensuring no sharp edgelon top surface OR The commercial ply 1.2 cm sha be litted as top sheet but should not bend at any of the area and shall have proper support all around the bed. All metal part shall be powder coated finish DFT-4650 Microns
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.