Procurement Of Machinery And Equipment For Processing Of 100 Tpd Municipal Solid Waste In Nalgonda Municipality.-1 Trommel Screen Unit(1.8M x7.5M) (Rotary Trommel) 75 MM perforated Type of Trommel : Rotary Trommel Material Handled :MSW (Municipal Solid Legacy Waste), Bulk density of material :0.5-0.9, Rated Capacity :6-10, Moisture content : 1% to 10%, Screen Practical Size :75 mm Hole, Trommel Size : Dia 1800MMX7500 MM length, Shell of Trommel Thickness : 8 mm Thickness MS Plate Shell Guide Roller Ring : OD1950X125MMX20, Thickness Inlet Feed Hood : 8MM Thickness MS Plate, Discharge Hood : 8 mm Thickness MS Plate, End Seals : Inlet and Outlet 1000 MMX1000 MM, Thrust Roll : 2 Nos. En-8 material special alloy steel with heat treatment process, Structure of Trommel : 125x65 MS Channel with heavy Duty, Mounting tyre.: 21x15x9 Solid Rubber Tyre with welded solid MS Bore, Supporting Ring: 50MMX6 MM MS Material, RPM Trommel: 0.5 to 14 RPM, Bearing : FAG/NBC/any other reputed brand, Make Pedestal : UKi/PBI/NBC Mak, Shafting : Design at Final Time, Motor of Rotary Dryer : 5HPX2 Nos 1440 Rpm(CGL/BB/Rotomotive Make of Drive : VFD Drive 10 HP Make: (Schneider/Delta), Type: Counter Current Slope : 2 to 6 Degree, Gear of Screen : Helical gear Heavy Duty 30: 1 ratio, Frequency : 50 Hz, 3 Phases, Balancing Trommel of machine: Statically balanced to ensure Zero Vibration Quantity : 01 Nos 2 Trommel Screen Unit(1.5M x6 M) (Rotary Trommel) 40 MM perforated Type of Trommel : Rotary Trommel Material Handled :MSW (Municipal Solid Legacy Waste), Bulk density of material :0.5-0.9, Rated Capacity :6-10, Moisture content : 1% to 10%, Screen Practical Size :75 mm Hole, Trommel Size : Dia 1800MMX7500 MM length, Shell of Trommel Thickness : 8 mm Thickness MS Plate Shell Guide Roller Ring : OD1950X125MMX20, Thickness Inlet Feed Hood : 8MM Thickness MS Plate, Discharge Hood : 8 mm Thickness MS Plate, End Seals : Inlet and Outlet 1000 MMX1000 MM, Thrust Roll : 2 Nos. En-8 material special alloy steel with heat treatment process, Structure of Trommel : 125x65 MS Channel with heavy Duty, Mounting tyre.: 21x15x9 Solid Rubber Tyre with welded solid MS Bore, Supporting Ring: 50MMX6 MM MS Material, RPM Trommel: 0.5 to 14 RPM, Bearing : FAG/NBC/any other reputed brand, Make Pedestal : UKi/PBI/NBC Mak, Shafting : Design at Final Time, Motor of Rotary Dryer : 5HPX2 Nos 1440 Rpm(CGL/BB/Rotomotive Make of Drive : VFD Drive 10 HP Make: (Schneider/Delta), Type: Counter Current Slope : 2 to 6 Degree, Gear of Screen : Helical gear Heavy Duty 30: 1 ratio, Frequency : 50 Hz, 3 Phases, Balancing Trommel of machine: Statically balanced to ensure Zero Vibration Quantity : 01 Nos Trommel Screen Unit(1.5M x6 M) (Rotary Trommel) 16 MM perforated Type of Trommel : Rotary Trommel, Material Handled :MSW (Municipal Solid Legacy Waste), Bulk density of material :0.5-0.9, Rated Capacity :6-10, Moisture content : 1% to 10%, Screen Practical Size :75 mm Hole, Trommel Size : Dia 1800MMX7500 MM length, Shell of Trommel Thickness : 8 mm Thickness MS Plate Shell Guide Roller Ring : OD1950X125MMX20, Thickness Inlet Feed Hood : 8MM Thickness MS Plate, Discharge Hood : 8 mm Thickness MS Plate, End Seals : Inlet and Outlet 1000 MMX1000 MM, Thrust Roll : 2 Nos. En-8 material special alloy steel with heat treatment process, Structure of Trommel : 125x65 MS Channel with heavy Duty, Mounting tyre.: 21x15x9 Solid Rubber Tyre with welded solid MS Bore, Supporting Ring: 50MMX6 MM MS Material, RPM Trommel: 0.5 to 14 RPM, Bearing : FAG/NBC/any other reputed brand, Make Pedestal : UKi/PBI/NBC Mak, Shafting : Design at Final Time, Motor of Rotary Dryer : 5HPX2 Nos 1440 Rpm(CGL/BB/Rotomotive Make of Drive : VFD Drive 10 HP Make: (Schneider/Delta), Type: Counter Current Slope : 2 to 6 Degree, Gear of Screen : Helical gear Heavy Duty 30: 1 ratio, Frequency : 50 Hz, 3 Phases, Balancing Trommel of machine: Statically balanced to ensure Zero Vibration Quantity : 01 Nos Belt Conveyor(0.8M X 15M) Type of Coveyor Flat type straight roll belt conveyor, Material Handled MSW, Bulk density of material 0.5 to 0.9 T/CuM, Belt speed 0.5 Mt/Minut Mtr/Sec, Belt conveyor length 15 meters, Belt width 800 mm, Angle of inclination 16 Deg. No.of feed points 01, Belt specification 4 ply, 315/3 rating ,Top 3mm , Bottom 1.5 mm, M 24 Grade, Belt Make Continental/Mithushima/Hindustan/any reputed available brand, Method of joining Hot Vulcanizing, PULLEYS A Head Pulley, Drum dia 320 mm, Length 1000 mm, Bearing Type Double Row Spherical Roller, Bearing Make SKF/FAG/NBC/any reputed available brand, Rubber Lagging 10mm Diamond Groove, Qty 01 No, B) Tail pulley Drum Dia 300 mm, Length 1000 mm, Bearing Type Double Row Spherical Roller Bearing Make SKF/FAG/NBC, RUBBER LAGGING MM Not Applicable , D) Rollers,Pipe Dia 76.1 mm, Pipe B Class, Bearing at shaft 20 mm, Seal Nylon Lubricant seal, Length 1000mm, Motor 5.0 HP, Make Crompton/Siemens or any other reputed available brand, Protection IP 55, Insulation Class F Insulation with temp rise ltd, To class B AND altitude less than 1000m, Above m.s.I confirming to IS 325, ip 55, Gearbox type Helical, make A) INPUT Not Applicable, B) Output Coupled,Type Internal Scrapper Provide Type V Plugged, Make TPE, All intermediate structure of conveyor, (Stringer type) Fabricated from Heavy Duty ISMC AND ISA as per TPE STANDARD DESIGN, Municipal Commissioner. Belt Conveyor(0.7M x15M) Type of Conveyor: 30 Deg. Troughing,3 roll belt conveyor 0.8 mx15m Material Handled : MSW, Bulk density of material :0.5 to 0.9 T/CuM, Belt speed 0.5 Mt./Minut Mtr/Sec, Belt conveyor length: 15 meters, Belt width: 700 mm, Angle of inclination 16 Deg., No.of feed points 01, Belt specification : 3 ply, 315/3 rating ,Top 3mm , Bottom 1.5 mm, M-24, Grade, Belt Make: Continental/Mithushima/Hindustan/any reputed available brand, Method of joining: Hot Vulcanizing, PULLEYS A) Head Pulley, Drum dia 320 mm, Length 900 mm, Bearing Type: Double Row Spherical Roller, Bearing Make : SKF/FAG/NBC/any reputed available brand, Rubber Lagging: 10mm Diamond Groove, Qty: 01 No, B) Tail pulley Drum Dia 300 mm, Length 900 mm, Bearing Type : Double Row Spherical Roller Bearing Make: SKF/FAG/NBC, RUBBER LAGGING MM Not Applicable , Qty 1 Nos, D) Rollers,Pipe Dia: 76.1 mm, Pipe: B-Class, Bearing at shaft: 20 mm, Seal: Nylon Lubricant seal, Length: 900mm, Motor : 5.0 HP, Make: Crompton/Siemens or any other reputed available brand, Protection: IP 55, Insulation: Class F Insulation with temp rise ltd, To class B AND altitude less than 1000m, Above m.s.I confirming to IS 325, ip 55, Gearbox type: Helical, make: A) INPUT: Not Applicable, B) Output: Coupled,Type Internal Scrapper: Provide Type: V-Plugged, Make: TPE, All intermediate structure of conveyor, (Stringer type) : Fabricated from Heavy Duty ISMC AND ISA as per TPE STANDARD DESIGN, 1 Belt Conveyor(0.7M x10M) Type of Conveyor: 30 Deg. Troughing,3 roll belt conveyor 0.8 mx15m Material Handled : MSW, Bulk density of material :0.5 to 0.9 T/CuM, Belt speed 0.5 Mt./Minut Mtr/Sec, Belt conveyor length: 10 meters, Belt width: 700 mm, Angle of inclination 16 Deg., No.of feed points 01, Belt specification : 3 ply, 315/3 rating ,Top 3mm , Bottom 1.5 mm, M-24, Grade, Belt Make: Continental/Mithushima/Hindustan/any reputed available brand, Method of joining: Hot Vulcanizing, PULLEYS A) Head Pulley, Drum dia 320 mm, Length 1000 mm, Bearing Type: Double Row Spherical Roller, Bearing Make : SKF/FAG/NBC/any reputed available brand, Rubber Lagging: 10mm Diamond Groove, Qty: 01 No, B) Tail pulley Drum Dia 300 mm, Length 900 mm, Bearing Type : Double Row Spherical Roller Bearing Make: SKF/FAG/NBC, RUBBER LAGGING MM Not Applicable , Qty 01 1 Nos, D) Rollers,Pipe Dia: 76.1 mm, Pipe: B-Class, Bearing at shaft: 20 mm, Seal: Nylon Lubricant seal, Length: 900mm, Motor : 3.0 HP, Make: Crompton/Siemens or any other reputed available brand, Protection: IP 55, Insulation: Class F Insulation with temp rise ltd, To class B AND altitude less than 1000m, Above m.s.I confirming to IS 325, ip 55, Gearbox type: Helical, make: A) INPUT: Not Applicable, B) Output: Coupled,Type Internal Scrapper: Provide Type: V-Plugged, Make: TPE, All intermediate structure of conveyor, (Stringer type) : Fabricated from Heavy Duty ISMC & ISA as per TPE STANDARD DESIGN, Belt Conveyor(0.7M x7.5M) Type of Conveyor: 30 Deg. Troughing,3 roll belt conveyor 0.8 mx15m Material Handled : MSW, Bulk density of material :0.5 to 0.9 T/CuM, Belt speed 0.5 Mt./Minut Mtr/Sec, Belt conveyor length: 7.5 meters, Belt width: 700 mm, Angle of inclination 16 Deg., No.of feed points 01, Belt specification : 3 ply, 315/3 rating ,Top 3mm , Bottom 1.5 mm, M-24, Grade, Belt Make: Continental/Mithushima/Hindustan/any reputed available brand, Method of joining: Hot Vulcanizing, PULLEYS A) Head Pulley, Drum dia 320 mm, Length 900 mm, Bearing Type: Double Row Spherical Roller, Bearing Make : SKF/FAG/NBC/any reputed available brand, Rubber Lagging: 10mm Diamond Groove, Qty: 01 No, B) Tail pulley Drum Dia 300 mm, Length 900 mm, Bearing Type : Double Row Spherical Roller Bearing Make: SKF/FAG/NBC, RUBBER LAGGING MM Not Applicable , Qty 01 1 Nos, D) Rollers,Pipe Dia: 76.1 mm, Pipe: B-Class, Bearing at shaft: 20 mm, Seal: Nylon Lubricant seal, Length: 900mm, Motor : 3.0 HP, Make: Crompton/Siemens or any other reputed available brand, Protection: IP 55, Insulation: Class F Insulation with temp rise ltd, To class B AND altitude less than 1000m, Above m.s.I confirming to IS 325, ip 55, Gearbox type: Helical, make: A) INPUT: Not Applicable, B) Output: Coupled,Type Internal Scrapper: Provide Type: V-Plugged, Make: TPE, All intermediate structure of conveyor, (Stringer type) : Fabricated from Heavy Duty ISMC & ISA as per TPE STANDARD DESIGN, Belt Conveyor(0.6M x15M) Type of Conveyor: 30 Deg. Troughing,3 roll belt conveyor 0.8 mx15m Material Handled : MSW, Bulk density of material :0.5 to 0.9 T/CuM, Belt speed 0.5 Mt./Minut Mtr/Sec, Belt conveyor length: 15 meters, Belt width: 600 mm, Angle of inclination 16 Deg., No.of feed points 01, Belt specification : 3 ply, 315/3 rating ,Top 3mm , Bottom 1.5 mm, M-24, Grade, Belt Make: Continental/Mithushima/Hindustan/any reputed available brand, Method of joining: Hot Vulcanizing, PULLEYS A) Head Pulley, Drum dia 300 mm, Length 800 mm, Bearing Type: Double Row Spherical Roller, Bearing Make : SKF/FAG/NBC/any reputed available brand, Rubber Lagging: 10mm Diamond Groove, Qty: 01 No, B) Tail pulley Drum Dia 280 mm, Length 800 mm, Bearing Type : Double Row Spherical Roller Bearing Make: SKF/FAG/NBC, RUBBER LAGGING MM Not Applicable , Qty 01 1 Nos, D) Rollers,Pipe Dia: 76.1 mm, Pipe: B-Class, Bearing at shaft: 20 mm, Seal: Nylon Lubricant seal, Length: 900mm, Motor : 3.0 HP, Make: Crompton/Siemens or any other reputed available brand, Protection: IP 55, Insulation: Class F Insulation with temp rise ltd, To class B AND altitude less than 1000m, Above m.s.I confirming to IS 325, ip 55, Gearbox type: Helical, make: A) INPUT: Not Applicable, B) Output: Coupled,Type Internal Scrapper: Provide Type: V-Plugged, Make: TPE, All intermediate structure of conveyor, (Stringer type) : Fabricated from Heavy Duty ISMC & ISA as per TPE STANDARD DESIGN, 9 Belt Conveyor(0.6M x7.5M) Material Handled : MSW, Bulk density of material :0.5 to 0.9 T/CuM, Belt speed 0.5 Mt./Minut Mtr/Sec, Belt conveyor length: 7.5 meters, Belt width: 600 mm, Angle of inclination 16 Deg., No.of feed points 01, Belt specification : 3 ply, 315/3 rating ,Top 3mm , Bottom 1.5 mm, M-24, Grade, Belt Make: Continental/Mithushima/Hindustan/any reputed available brand, Method of joining: Hot Vulcanizing, PULLEYS A) Head Pulley, Drum dia 300 mm, Length 800 mm, Bearing Type: Double Row Spherical Roller, Bearing Make : SKF/FAG/NBC/any reputed available brand, Rubber Lagging: 10mm Diamond Groove, Qty: 01 No, B) Tail pulley Drum Dia 280 mm, Length 800 mm, Bearing Type : Double Row Spherical Roller Bearing Make: SKF/FAG/NBC, RUBBER LAGGING MM Not Applicable , Qty 01 1 Nos, D) Rollers,Pipe Dia: 76.1 mm, Pipe: B-Class, Bearing at shaft: 20 mm, Seal: Nylon Lubricant seal, Length: 900mm, Motor : 3.0 HP, Make: Crompton/Siemens or any other reputed available brand, Protection: IP 55, Insulation: Class F Insulation with temp rise ltd, To class B AND altitude less than 1000m, Above m.s.I confirming to IS 325, ip 55, Gearbox type: Helical, make: A) INPUT: Not Applicable, B) Output: Coupled,Type Internal Scrapper: Provide Type: V-Plugged, Make: TPE, All intermediate structure of conveyor, (Stringer type) : Fabricated from Heavy Duty ISMC & ISA as per TPE STANDARD DESIGN, 3 10 ADS UNIT (Air Blower) Air flow capacity: 1500 CFM pressure range: 500-800 mm VC Vacuum Range: 400 bar, Efficiency: 70-90% 1 11 Magnetic separator over band type permanent Over band type permanent magnetic separator machine With 2hp 3ph 1440rpm electric motor, reduction gear, 2 nos of head roll ,8 mm thickness rubber belt and complete machine Magnetic size : 1000mm w x 500mm l x 250mm thickness, Suspended height: 250mm, Magnetic material: strontium ferrite magnet Magnetic gauss power : 4,500 to 5,000 1 No. 12 Bag Opener Single Shaft Waste Bag Opener Machine with rotor diameter 600mm etc
