|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, etc. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil. |
| 3 | M&L PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate |
| 4 | S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 |
| 5 | Material and Labour for mild steel round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with welding for securing chain link fencing etc conforming toFe-290.Gde-E-165, complete all as specified and directed., |
| 6 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome |
| 7 | M&L Preparing surface of ends of post, steel & iron work, new or old & treated with tar or coal tar black paint, area tarred exc 0.1 sq. m. but n exc 0.5 sq. m each, treating ends of posts, backs of chowkats, etc. |
| 8 | All as per item No. 7above herein before but not exceeding 10cm wide or girth. |
| 9 | S & F MS screw bolts 5 to 10mm dia (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal / square nuts and 5 to 10 CM long all as specified and directed. |
| 10 | S&F in repairs for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at cross with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed. (Each line to be measured separately) |
| 11 | Dismantling fencing wire mesh, any type all directed by Engineer-in-Charge. |
| 12 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire |
| 13 | Supply only Chain link MS galvanisd fencing, any size or type |
| 14 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming to FE 410,E-250 Qualitry A . |
| 15 | M&L for 100 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in path/hardstanding etc complete all as specified. |
| 16 | M&LforProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl demolition of old paver block, complete all as specified and directed. |
| 17 | M&LforProviding and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl demolition of old paver block, complete all as specified and directed. |
| 18 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed. |
| 19 | M&L Brick Work with Sub-Class ‘B’ Bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6,complete all as specified and as directed. |
| 20 | M&L for brick work with burnt modular size bricks built in cement mortar 1:4 straight or curved on plan to any radius in half brick thick walls and all as directed. |
| 21 | M & L for PCC 1:2:4 type B-1 using 20mm graded aggreagte asin coping bed block etc complete all as specified and directed |
| 22 | M&L PCC in surface channels,benching in sewers,drains etctype B1 (1:2:4) using 20 mm graded stone aggregate |
| 23 | M & L for redndering in cement mortar (1:4) 15mm thick on concrete /brick masonry wall surfaces, complete as specified and directed. |
| 24 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Cover Slab of Manholes, Septic Tanks, etc., set in Cement Mortar 1:4 including demolition of existing RCC slabs ., complete all as specified and as directed.NOTE : Reinforcement will be Measured and Paid separately under appropriate Items. |
| 25 | M&L TMT Bars 10mm dia and overcut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. |
| 26 | M&L two coats ofcement base paint over a coat of primer onnew wall surface including preparation of surface. |
| 27 | M&L preparation of old surface of wall and applying one coat ofcement base paint |
| 28 | M& L for Granite of any type 20MM thick cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigmentto match the shade of granite stone including grinding and polishing complete in vertical surfaces of wall incl10 MM thick backing coat in CM 1:4 IncludingDemolition of stone slabs tiles of any description or thickness in floors aprons laid bedeed and pointed in any morter and any position. |
| 29 | Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) |
| 30 | M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified. |
| 31 | M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm thick screed bed in CM 1:4 incl demolition of old tiles ,complete all as specified and as directed. |
| 32 | M&L For pre-polished glazed designer ENDURA tiles/dura stone, coloured, 30cm x 30cm x 10mm thick , set, jointed and pointed in neat cement slurry, pointed in white or coloured cement to match in floors over 15mm thick Screed in 1:4 including dismantling of old dura stone tiles complete all as specified and directed. |
| 33 | S&F in repair 450mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required |
| 34 | M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate set in cement mortar 1:4in kerb stone with plain fair faces complete all specified and directed |
| 35 | S & F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 37 | Supply and fixed in repair 18 mm thick WPC Jali factory made 100% solid WPC (wood polimer composite) jali of required size comprising of virgin PVC resin of K value 50-60 (suspension grade) calcium carbonate and natural fibers (wood powders/ rice husk, wheat husk) and non toxic additives, made from extrusion process WPC foam sheet single extr having minimum density not less than 650 Kg/cbm manufactured by ISO 9001-2015 certifed company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100 N (Edge), minimum compressive of 50 N/mm2, modulous of elasticity 850 N/mm2 and resistance of spread fo flame of class A category with property of being termite/Borer free.Water/mosture proof and fire Retardant.WPC jali to be fixed with stainless steel butt hinges (if required) of required size with necessary full body threaded star headed counter sunk SS Screws.All as per direction of Engineer-in-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company for interiors/kitchen shutters/ balcony & Internal Doors and partitions.Make : Rajshri or Equivalent as approved by E-in-c Branch as directed by Engineer- in- charge/ GE. |
| 38 | S&F 2mm polycarbonate roofing/wall sheet corrugated or plain of any colour as approved by Engineer-in-Charge fixed with self driven screw with frame incl taking down complete all as specified and directed. |
