Tender For Special Repair To Building No T-7 (Or Living) Under Age B/R Iii Of Ge (West) Delhi Cantt-10; 1 Dismantling asbestos cement(corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. 2 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (green colour) min 150 GSM and 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 3 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge,roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 4 M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3.complete all as specified and directed. 5 Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. 6 Providing & fixing false ceiling 12mm thick semi perforated micro tengular edge at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. 7 Dismantling wooden scantling work framed truss etc complete all as specified and directed. 8 S&F Mild steel screw bolts shank dia 12 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Fe-410- W(Gde-E-250) quality-B complete all as specified and directed. 9 S&F mild steel rolled work as in roof trusses, (framed),trussed,purlin,crane gantries,rails and heavy bracket framing (Beam,angle,base plate, channel or flat section) including distance pieces,cleats etc,confirming to gradeFe 410 -W (GdeE- 250) quality-A, complete all as specified and directed. 10 Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. 11 S&F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks, wind tieand similar work conforming to Fe.290.Gde-E-165 including fixing of hold fast with bed block of size 200x200x15mm in CM 1:2:4 (using 20mm graded agg complete all as specified and directed. . 12 M&L for preparation of newsurfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and incld a coat of red oxide primer.complete all as specified and directed. 13 M&L Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 14 M&L for 40 mm thick cement concrete type B0(1:2:4) using 12.5 mm graded stone aggregate as in sub bases complete all as specified and directed. 15 M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. 16 M&L for glazed ceramic coloured tiles (300x600mmx7mm ) thick on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:3 and a backing coat rough finishedto receive tiles.complete all as specified and directed. 17 Taking down Chowkats or framesn.exc 1.5 sqm each with shutters (without taking off shutters from the frames).complete all as specified and directed. 18 Taking down Chowkats or framesexc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames).complete all as specified and directed. 19 S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) not less than 0.55kg/m work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 20 S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) not less than 0.55kg/mfor shutters of doors, windows & ventilators including providing and fixing hinges (75 mm long) / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. 21 S&F powder coated Aluminum tower bolt 75 mm long fixed with ss screw complete all as specified and directed. 22 S&F powder coated Aluminum handle 75 mm long fixed with ss screw complete all as specified and directed. 23 S&F 35mm thik plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated complete all as specified and directed. 24 S&F providing 30mm thick factory made wire mesh solid WPC door shutter consisting of density 650 kg/cum manufactured by an ISO 9001-2015 certified company door to be panneled with SS mosquito mesh and XTN aluminum mesh for additional strength and safety purpose. ( Conforming as per IS 4020) The door should be water prooof , termite proof, fore retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardware should be fixed with 19x6mm size steel screws etc complete as per direction of engr in charge, manufacturers specifications & drawings Note: Fixture /fittings shall be measured & paid under relevant item. 25 S&F 4 mm thick figured glass with reflective privacy film and glazingin squares not exc 0.5 Sqn in each pane complete all as specified and directed. 26 S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed 27 S&F curtain rails 25 mm dia Harrison rails, mild steel, chromium plated with fixing designer brackets, stops, rollers,bulb with SS long screw etc complete all as specified and directed. 28 S&F floor door stopper Overall length of cover plate 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor.complete all as specified and directed. 29 Taking down cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed. 30 M&L for 15mm thick rendering of ready mix plaster of approved make on brick work or concrete surfaces on externalwalls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. 31 M&L for 10mm thick rendering of ready mix plaster of approved make on brick work or concrete surfaces on internal walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed. 32 M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over and incld a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. 33 M&L for complete removal of exixting treatment of walls and applying two coat of oil bound distemper over and incld a coat of alkali primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed. 34 Providing and applying wall care putty of 1 mm thick over plastered surface to prepare the surface even and smooth. complete all as specified and directed. 35 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. 36 Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. 37 Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and Precast concrete articles, complete all as sfd and directed. 38 M&L for Brick work with Sub class B old size burnt bricks straight or curved on plan to any radius in half brick thick walls, built in Cement mortar 1:4 complete all as specified and directed. 39 M&L for Brick work with Sub class B old size burnt bricks straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. 40 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 41 M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl Screed bed or bedding layer 15 mm thick of mortar 1:4complete all as sfd and directed. 42 Demolition of cement concrete in ground floor and paving n.exc 15CM thickness (below or above ground level)complete all as specified & directed. 43 M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2(using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site complete all as specified and directed. 44 M&L endura parking tiles 30cm x30cm x 15mm thick,set, jointed andpointed in neat cement slurry in floors With grey pigment cement and pigment over and including 15mm thick screed bed in CM 1:4etc all as specified and directed 45 Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil. complete all as specified and directed. 46 M&L forHardcore of broken stone or boulders n exc 63mm deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. 47 M&L for 75 mm thick Cement concrete type D2 (1:4:8) using 40 mm graded aggregate as in sub base all as specified and directed. 48 Dismantling of stone slab/paving tiles laid, bedded and pointed in any mortar of any description or thickness in floors complete all as specified and directed. 49 M&LProviding and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed. 50 Mirror polishing on old marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and directed. 51 M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and incld 15mm thick cement screed base in CM 1:4complete all as spd & directed. 52 S&F in repair grating doom 100 mm dia of CPhole/without hole complete all as spd & directed. 53 M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed. 54 Supplying and laying of 20 mmexternal dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all plain/brass fittings in trenches/ walls including dismantling old GI pipes including complete all as specified and directed. 55 Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass and plain fittings including dismantling old GI pipes complete all as specified and directed. 56 S&F110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls fixed with MS clamps and shoe at ground level incl dismantling drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortarcomplete all as directed. 57 M&L for PVC floor nhanitrap of 100mm dia,plain with grating including jointing with solvent cement complete all as specified and directed. 58 S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed. 59 S&F 110mm PVC (SWR) bends any radius complete all as specified & directed. 60 S&FBrass CP basinmixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed. 61 S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mmcomplete all as specified and directed. 62 S&F in repair 15mm dia bib taps, cast copper alloy chromium plated with capstan head fancy type,screwed down,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 63 S&F in repairs15 mm bore chromium plated fancy type stop valve/angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specified & directed. 64 S&F in repairs Two way Bib cock, fancy type chromium platedcast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified. 65 S&F in repair Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified. 66 S&F in repair vitreous china wash hand basin, white flat back, size 580 x 450mm excluding taps, waste pipe chain and plug and porcelain but including brackets, 32 mm dia waste coupling complete all as specified and directed. 67 S&Fin repair siphonic/washdown single piece toilet (rimless),(washdown seprated toilet bowl and tank of standrad size) of white coloured incl traps, seat cover flush pipe and connecting pipe, inlet and overflow pipes for flushing cistern incl jointing to socket of flushing ring & connecting pipe to union of flushing cistern complete all as spd and directed. 68 S&F in repair mirror 600mm X450mm bevelled edgeof selected quality glass with chromium plated brass screws and cup washers complete all as specified and directed. 69 Supply and fix in repairs chromium plated single tubular towel rail 20mm dia, D type 60 cm long between flanges, including a pair of CP brass brackets complete all as specified and directed. 70 Supply and fix for chromium plated soap dish complete all as specified and directed. 71 Supply and fix for chromium plated towel ring 200 mm dia complete all as specified and directed. 72 S&F in repairs 15 mm dia wall mixer cost copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. 73 S&F in repairs 200 mm dia shower cost copper alloy chromium plated with long neck pipe, complete all as specified and directed. 74 S&F in repairs 32mm bore PVC waste pipe flexiblecomplete all as specified and directed. 75 M&L 1000 litres capacity rotational moulded polyethylene water storage tanks ISI marked triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polyethylene float and fly nut complete and GI tank nipple, screwd for iron pipeincld dismantling of tank incld tank nipple and float valve complete all as specified and directed. 76 Supply andfabrication & fixing of Modular Kitchen cupboards, lower and upper cabintsetc ,front side, bottom, top, and partions etcmade out of 15-18 mm thickHDHMRboardand back side 12 mm board(action tesa or equivalent ) withthe front face shall be covered with laminate of high gloss from merino and the edges to be covered via 1.3 mm thick edge bending tape (colour of glossy laminates as approved by GE) Colour of laminates , design& paterns ofpartations/ etc as approved by GE) including all accessories of fittings -Auto/soft closing hinges for shutters ,ss handle ,C/J gola profile for handel less, etc as required complete all as specified and as directed including frame work etcall as specified and directed.. 77 S & F stainless steel butt hinges 100mm long medium weight etc complete all as specified and directed. 78 S & F200mm long aluminum, anodized barrel tower bolts of extruded section completeall as specified & directed. 79 S & Faluminum anodised handle 150 mm long cast type complete all as specified & directed. 80 S & F300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified & directed. 81 Excavation in trenches n.exc 1.5m wide and n.exc 1.50m depth, for foundation etc. and getting out in soft loose type of soil.complete all as specified and directed. 82 Returning filling in excavated approved earth in to trenches around pipe etc after laying of pipes and testing complete including watering and well ramming in 25 cm layers complete all as specified & directed. 83 Removing surplus soil to a distancebeyond out side defence areawhere directedcomplete all as specified & directed.. 84 M&L for 150mm nominal size Double wall corrugated HDPE pipes stiffness class SN 8 high density,polyethylene pipe resistent to chemicals,easy and light weighted,long living,low friction,flexible,sun resistant pipe and laid in trenches incl demolition of old cement pipes complete all as specified and directed. 85 S&F factory made SFRC (Steel fibre reinforcement concrete ) manhole cover medium duty M-25 grade,75mm thick with SFRC frame of clear size exc. 0.35 Sqm but n.exc 0.90 Sqm, provided with provision of two lifting hooks welded at appropriate location,complete all as specified & directed. 86 Demolition of reinforced cement concrete roofs, floors (other than ground floor), beams, staircases, landing, chajjas and similar suspended work complete all as specified & directed. 87 M&L for nominal RCC 1:1.5:3 type A1 with using 20mm graded stone agg as in beams, cantilevers, bressummers, lintels over 1.5m span.complete all as specified and directed. 88 M&L for nominal RCC 1:1.5:3 type A1 with using 20mm graded stone agg as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like etc all as specified and directed. 89 M&L Formwork to sides and soffits ofrough finish surfaces of concretefloor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beamsfair finished surfaces of concrete etc all as specified and directed. 90 M&L Formwork to soffits ofrough finish surfaces of concrete suspended slabs such as roof slabs, floor slabs, landing and similsr works; not exc. 200 mm thik etc all as specified and directed. 91 S&F MS TMTbars 10mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for coloums, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed. 92 Ditto but 5 mm dia and over upto and incl 10 mm dia in stirrus, spaces, and binders complete all as specified & directed. 93 S&FDoor closer hydraulically regulated,aluminium extruded section bodydesignation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. 94 M&L ploviding and injectiong chemical emulsion for postanti termite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre holes @ 300mmC/C including drilling and plugging holes etc. in apron. complete all as specified and directed. 95 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardantt and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. 96 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately complete all as specified and directed.. 97 Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified & directed. 98 Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto for item no 98 complete all as specified & directed. 99 M&L Cement concrete in surface channels and drains Type C2 1:3:6 (20 mm graded aggregate complete all as specified & directed. 100 M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping etccomplete all as specified and directed. 101 Taking down carefully copper/aluminium point wiring from woodenbattan orconduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.complete all as specified and directed. 102 Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box concealed in walls with suitable modular inner and outer plate for housing modular switches, socket outlet and fan regulators etc , all as specified and directed for the followings:- Note: ceiling Light/ Fan points wirings are to be drawn in existing in situ conduits all as directed. 103 (a)One light/fan/bell point controlled by one way switch (switch to be measured and paid separately) 104 (b)One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. 105 (c)One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. 106 All as per above item No102. but with cable 2.5 Sqmm size 1100 volts grade for One 3 Pin socket 15A Independent board 107 Supply and fix switch modular type single pole one way 6 Amps all specified and as directed. 108 Supply and fix modular switch 16 Amps one module single pole one way complete all as specified and directed. 109 Supply and fix modular socket 3/5 pinmulti purpose 6 Amps flush type complete all as specified and directed. 110 Supply and fix modular socketmulti purpose 2-in-1, 6 pin 6/16 Amps 2 module complete all as specified and directed. 111 Supply and fixmodular ceiling fan regulator , step typefor BLDC ceiling fan of suitable capacity and module complete all as specified and directed. 112 Supply and fix switch modular type single pole bell push 6 Amps complete all as specified and directed. 113 M&L bell ding dong AC,230 volts,single pole complete all as specified and directed. 114 Supply and fix in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed. 115 Supply, laying and drawing submain wiringin and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed. 116 Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and deposit to MES store complete accessories all as specified and directed. 117 Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 118 S&Fof factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for aboveDB all as specified and directed.NOTE (a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. 119 S&Fof factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet andfixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160,4 pole MCCB and ELM as incommerand 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for aboveDB including taking down old DBs all as specified.NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. 120 S&F inofMCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed. 121 S&Fof single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCBs complete all as specified and directed. 122 S&Fof SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. 123 Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 124 Supply & fix exhaust fan, steel body AC single phase. 230 V of size 300mm sweep with blades and frame and louvers complete all as specified and directed. 125 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200/250mm with making opening on the wall/surface in round/square shape as per site requirement complete all as specified. 126 Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 127 Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete. complete all as specified and directed. 128 S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. 129 S&Fof single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCBs complete all as specified and directed. 130 S&F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV,connection pipe incl all PVC & CP connections all as directed by Engr-in-Charge. 131 M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
