Tender For Polishing To Certain Wooden Furniture And Repair To Certain Modular Furniture At Cme Under Ge (Cme) Khadki; 1 A) M&L for two coats of french polish completely, internal and external to all exposed surface of furniture, smothening of surface with sand emery paper, applying suitable colour and wood filler (wood sealer) wherever required to the following furniture articles. All are MES pattern furniture viz F/DB/FD/MAP/TP series or similar items including applying bee wax for depressed surface whereever required before polishing all as specified as shown on drgs and as directed by Engineer-in-Charge.B) Work will be executed where the furniture exist in different user units at OTM/Md Accn under the jurisdiction of GE (CME) Khadki including BSOs Furniture Yard as directed by Engineer-in-Charge. 2 Almirah large 1/2 hanging & 1/2 shelves (Drg No.DB-4049) 3 Almirah large with shelves wooden (DB-4116) 4 Almirah med with shelves wooden (DB-3959) 5 Almirah med with shelves & stationary unit wooden (DB-2469) 6 Bin soiled linen small/ large (FD-244, FD-15) 7 Bin linen multipurpose (FD/E6/MAP/09) 8 Bed plywood top with FMN set (FD-246) 9 Board notice 2.5 mtr x 1.00 mtr (FD-99 or similar pattern) 10 Book case small/large (FD-58,237,355) 11 Chair CBB w/o arms (DB-3972) 12 Chair writing (FD-280) 13 Chair dining (FD- 279, 228, FD/MAP-II/05) 14 Chair easy (FD-229) 15 Instead of french polish, touch wood polish shall be used for Chair dining with long back (FD-357) 16 Chair Easy cushioned (FD-358) 17 Cot plywood with FMN set (DB-3979) 18 Desk student wooden (DB-4031) 19 Desk Instructor 20 Lecture stand with Integrated 21 Drawing table class room with stool 22 Hat stand with mirror (FD-233) 23 Peg table (FD-277/384) 24 Stool 2 high wooden (DB-2365) 25 Stool dressing gents /ladies (FD-252, 282, 374) 26 Stool dressing Cushioned (FD/E6/MAP/14(R)) 27 Side board (FD-372, 241) 28 Sofa set 5 seater, removing of unsv cushions with tapestry clothand supply new cushion of 40 density 100mm thick duly covered with tapestry cloth and whiteinner lining with quality zip on one side with two runners. Tapestry cloth should not be less than Rs 200/meter (FD-281/258) 29 Sofa set 4 seater, removing of unsv cushions with tapestry clothand supply new cushion of 40 density 100mm thick duly covered with tapestry cloth and whiteinner lining with quality zip on one side with two runners. Tapestry cloth should not be less than Rs 200/meter (FD-281/258) 30 Sofa chair single seater (FD-281/272) 31 Chair dining MAP (FD/E6/MAP/10(R) or similar) 32 Table dining 4 persons (FD-239/376) 33 Table dining 6 persons (FD-239/376 or similar) 34 Table dining 8 persons (FD-239/376 or similar) 35 Table writting (FD-275) 36 Table centre (FD-274) 37 Teapoy (FD-382/DB 3975) 38 Table dressing gents (FD-379) 39 Table dressing ladies (FD-251/378) 40 Table 3x2 without drawer (FD-224) 41 Table 2x2 42 Table bed side(FD 267/248) 43 Table office officer wooden 44 Table office clk wooden (DB-3972) 45 Rack arms for 8 Rifle to 16 Rifle 46 Rack side 3/4 Spaces 47 Rack store 6x2x6 48 Table study (DB-3982) 49 Table centre B Type hall with glass top (DB-3937) 50 Table 3x3 wooden 51 Table 6x3-6x2-6 high (FD-136) 52 Table 5x210 (DB-2348) 53 Table 45 cm x 45 cm x 75 cm high 54 Instead of two coats of black paint to be done over a coat of primer on Trestle store room wooden 55 (A) Repair/ replacement of old unsv existing parts including tapestry cloth of following Modular/ TP/ Branded/ MAP furniture. S&F new parts of Branded/ Modular (TP/ MAP) furniture as under. Material shall be of the same specifications as used in these furniture articles by manufactures. Rates includes removing of old unsv material. (Sample of chairs/ tables can be seen in furniture yard of BSO GE (CME) before quotating the rates). (B) Work will be executed where the furniture exist in different user units at OTM/Md Accn under the jurisdiction of GE (CME) Khadki including BSOs Furniture Yard as directed by Engineer-in-Charge. 56 Chair writing cushion Drg No. FD/E6/MAP/03 or similar pattern 57 M&L for upholstry of tapestry cloth of seat & back, along with malmal cloth to covering the seat and back ofchair. Tapestry cloth should not be less than Rs. 200/- Mtr along with PVC lippingaround the back of chairs as directed by Engr-in-Charge. 58 S&F of seat and back of chair,duly fitted with 12 mm thick ply BWR grade with 50 mm thick moulded cushion of 40 density, duly with upholstry as existing in orginal pattern/ in drgs along with PVC lippingaround the back of chairs or as directed by Engr-in-Charge. 59 S&F of handle of chair as existing duly fitted with fixing arrangment or as directed by Engr-in-Charge. 60 M&L for spray painting to steel frame after preparation of surface one or two more coats of high quality synthetic enamel paint to obtain glosy finish as in original existing color. 61 Continuous gas welding as required per 10 CM. 62 Chair classic Drg No. Godrej 07 (CH-7B) or similar pattern 63 Removing of old/existing rexine cloth from seat and back of chair classic CH-7B and upholstry the same with new rexine cloth, rexine should not be less than Rs. 160/ Mtr. 64 S&F of back of chair duly fitted with 12 mm thick BWR grade plywood with 50mm thick cushion of 40 mm density, along with screw as per sample for fitting with complete upholstry with rexine cloth as in original shown in drg or as directed by Engr-in-Charge. 65 S&F of seat of chair duly fitted with 12 mm thick BWR grade plywood with 50mm thick cushion of 40 mm density, along with screw as per sample for fitting with complete upholstry with rexine cloth as in original shown in drg or as directed by Engr-in-Charge. 66 M&L for painting of chairs with synthetic enamel paint of existing color after preparation of surfaces including grinding, emery and applying putty wherever required as directed by Engr-in-Charge. 67 S&F of PVC handle duly fitted with fixing arrangement with arms chair as directed by Engr-in-Charge. 68 Hard rubber shoes as per drg 69 Rubber cap for conduit pipe as per drg 70 Chair computer revolving (high back and mid back) Drg No. FD/E6/MAP/01 or similar pattern 71 Removing of old/existing tapestry cloth from seat & back along with malmal cloth and upholster the same with new tapesty cloth. Tapestry Cloth should not be less than Rs.200/Mtr to make complete as shown in drgs along with PVC lipping all around the back of chairs or as directed by Engr-in-Charge 72 Removing of old unsv hydraulic gas lift of chair and S&F with new hydraulic gas lift as directed by Engr-in-Charge 73 Removing of old unsvhandle. S&F handle duly with fixing arrangement as directed by Engr-in-Charge 74 M&L to Painting to steel frame after preparation of surface one or two more coats of high quality synthetic paintto obtain glosy finish as in original existing colour as directed by Engr-in-Charge 75 Removing of old unsv caster wheels of chair. S&F new caster wheels as directed by Engr-in-Charge 76 Removing of old/ unsv existing moulded cushion from seat of chair, S&F 50 mm moulded foam with 40 density along with tapestry cloth of not less than Rs.200/Mtr as directed by Engr-in-Charge 77 Removing of old/ unsv existing moulded cushion from back of chair, S&F 50 mm moulded foam with 40 density along with tapestry cloth of not less than Rs.200/Mtr as directed by Engr-in-Charge 78 Computer table Drg No. FD/E6/MAP/03 or similar pattern 79 Removing of old unsv drawer of table computer along with sliding channel of both side. S&F new drawer with 4mm thick teak wood beading polished alround and both side channel with complete arrangements for fixing them in table computer as directed by Engr-in-Charge. 80 Removing of old unsv key board from table computer along with sliding channels of both side. S&F new keyboard with 4mm thick teak wood beading polished alround along with sliding channel and complete arrangements for fixing them in table computer as directed by Engr-in-Charge. 81 Removing of old unsv mouse tray from table computer along with sliding channels of both side. S&F new mouse tray with 4mm thick teak wood beading polished alround along with sliding channel as directed by Engr-in-Charge. 82 Removing of old unsv bottom shelf from table computer, S&F new bottom shelf made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading alround as directed by Engr-in-Charge. 83 Removing of old unsv vertical shelf from table computer, S&F new vertical shelf made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading polished alround as directed by Engr-in-Charge. 84 Removing of old unsv sides from table computer, S&F new sides of 150mm width made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading polished alround as shown in drg or as directed by Engr-in-Charge. 85 Removing of old unsv shelf from table computer, S&F new shelf made of 18mm thick prelaminated MDF board of exterior .grade with 4mm thick teak wood beading polished alround as shown in drg or as directed by Engr-in-Charge. 86 M&L for scratching the entire steel frame of table with sand emery paper and applying one coat of synthetic enamel paint of existing colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge. 87 Continuous Gas welding as required per 10 CM. 88 Removing of old unsv legs with nylon buffer from table computer,S&F new legs with nylon buffer as shown in drg or as directed by Engr-in-Charge 89 Removing of old unsv rect PVC cover from table computer,S&F new 25mm x 50mm rect PVC cover made to shape as shown in drg or as directed by Engr-in-Charge 90 Removing of old unsv top of table computer, S&F new top made of 18mm thick prelaminated MDF board of exterior grade with 4mm thick teak wood beading polished alround as shown in drg or as directed by Engr-in-Charge 91 Chair tip up 750mm with moulded polythene foam for seat & back (Sample of chair can be seen in site before quoting rates) Drg No. TP 92 M&L for removing of old unsv/ untension MS spring, 2 nos in each seat and S&F new MS spring of seat fitted in iron bar of seat, as to smooth functioning as is original to chair, with all other allied works and re-fixing the same as directed by Engr-in-Charge. 93 M&L for spot gas welding to the broken parts/ joints of MS Frame, base plate etc as required to make the chair in servicable condition complete all as per specified & directed by Engr-in-Charge. 94 M&L for removing old unserviceable tapestry cloth of seat, back & sides of chair tip up moulded polythene foam of size 750mm. S&F new tapestry cloth of high quality to upholstry the chair tip up moulded polythene foam seat, back & sides covering all seat and back as original shown on drgs or as directed by Engr-in-Charge. Colour of cloth as approved by GE .Tapestry cloth should not be less than Rs 260/-Mtr. 95 Removing of unsv PU arm rest of chair tipup. S&F of new PU arm rest of chair tipup with suitable bolts and nuts complete all as per specified & directed by Engr-in-Charge. 96 Removing of unsv MS anchor bolt at the base plate fixed to the foundation. S&F of new MS anchor bolt at the base plate for fixing the chairs to the foundation rigidly with suitable nuts, washer, chemical injection/ grouting complete wherever required upto the satisfaction, as specified & directed by Engr-in-Charge. 97 Chair school with hand board Drg No. FD/E6/MAP/05 or similar pattern 98 M&L for scratching the entire frame of chair with sand emery paper and applying one coat of synthetic enamel paint of existing colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge 99 S&F new one piece PVC seat and back and fixing the same by providing four screws as described in drg. (Make- Blow plast/Nilkamal/supreme) after removing the old unsv of the same. 100 S&F new 25mm dia hollow steel pipe along with hinges arrangement complete on RHS for supporting the openable hand board inserted in 20mm dia MS rod welded to frame complete as described in drg after removing the old unsv of the same. 101 S&F new 18mm thick prelaminated MDF board exterior garde top openable/hand board with 4mm thick teak wood edging alround as described in drg after removing the old unsv of the same. 102 S&F of hard rubber shoes, removing the old unsv shoes as per drg. 103 Continuous gas welding as required per 10 CM. 104 Chair verandha Drg No. FD/MAP-II/06 or similar pattern 105 Removing the existing unserviceable/ broken PVC seat and back from the chair, S&F new PVC seat and back 4mm thick to the chair verandah MAP afterproviding flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat. The PVC seat shall got approved from GE before supply. Make of PVC seat Amko/ Comfo/ Harmony 106 M&L for scratching the entire frame of chair with sand emery paper and applying one coat of synthetic enamel paint of existing colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge.
