Tender For Beautification Work Of Cremation Ground In Mohalla Takiyapura In Nagar Panchayat Badagaon Jhansi.
Tender Value
24.40 Lakhs
Estimated cost
Bid Submission
19 Nov 2025
0 days left
EMD
2.44 Lakhs
Bank guarantee accepted
Document Fee
2900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baragaon → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Beautification Work Of Cremation Ground In Mohalla Takiyapura In Nagar Panchayat Badagaon Jhansi.
BOQ
| Sl. No. | Item Description |
| 1 | 15.3 Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within 50metres lead as per direction of Engineer - in- charge. |
| 2 | 15.23 Dismantling tile work in floors and roofs laid in cement mortar stacking material within 50 metres lead.including15.23.1 For thickness of tiles 10 mm to 25 mm |
| 3 | 15.7 Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge.15.7.4 In cement mortar |
| 4 | 13.91 Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping, sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. |
| 5 | 15.56 Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead. |
| 6 | 2.6.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 7 | 2.27 Supplying and filling in plinth with sand under floors,icluding watering, ramming,consolidation and dressing complete |
| 8 | Earth work in filling and cutting and cutting for for embankment with mechanicaly compacted |
| 9 | Providing and laying in position cement concrete in Foundation 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mmnominal size) |
| 10 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 4.1.2 |
| 11 | 6.34.1Brick work with nonmodular fly ash bricks confirming to IS:12894, class designation 10 in foundation. Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, including the cost of centering, shuttering and finishing : 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 4.2.2 |
| 13 | 6.32.2 Brick work with clay fly ash bricks (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) With F.P.S.(non modular) bricks : |
| 14 | 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)13.1.2 |
| 15 | 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and bindingin Super Structure. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 16 | 10.31Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 40x40x6mm, joints mitred and welded by angle iron 40x40x6mm or 40x 6 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 17 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 18 | 13.113 Varnishing with varnish of approved brand and manufacture: 13.113.2 One or more coats with copal varnisH |
| 19 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer\"s specifications & direction of Engineer in-Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. 16.91.2 |
AI Tender Summary
Tender Timeline
Oct 29, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 19, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender