Tender for Provision Of Minimum Passenger Amenities (Mea) At Various Stations Over Sambalpur Division.Provision Of Minimum Passenger Amenities (Mea) At Various Stations Over Sambalpur Division.,; 1.0 CARRIAGE OF MATERIALS 1.2 By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM 1.2.2 Earth 1 1.2.2.2 Every additional lead of 50m or part thereof beyond1st 50 m upto 9 such additional lead cumlead 405 50.96 20638.8 2.0 EARTH WORK 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2 2.8.1 All kinds of soil. cum 45 286.85 12908.25 3 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. cum 11 2161.2 23773.2 4.0 CONCRETE WORK 4.1S CEMENT CONCRETE (CAST IN SITU) 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4 4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) cum 5 6833.4 34167 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 5 4.2.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 20 9793.75 195875 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 6 4.3.1 Foundations, footings, bases for columns Sqm 40 307.95 12318 5.0 REINFORCED CEMENT CONCRETE 5.1S CAST IN SITU 5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 7 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) cum 14 8364.2 117098.8 6.0 MASONRY WORK 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 8 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 1 6658.25 6658.25 8.0 CLADDING WORK 8.1 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). 8.1.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. 9 8.1.1.1 Area of slab upto 0.50 sqm Sqm 20 4827.4 96548 10.0 STEEL WORK 10 10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Kg 190 88.5 16815 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 11 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 28 142.3 3984.4 11.0 FLOORING 11.16S TILE FLOORING 11.19 Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 12 11.19.1 Light shade pigment using white cement Sqm 28 1295.2 36265.6 11.26S KOTA STONE FLOORING 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 13 11.26.1 25 mm thick Sqm 170 1706.6 290122 12.0 ROOFING 12.1S SHEET ROOFING 12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 14 12.1.2 0.80 mm thick with zinc coating not less than 275 gm/sqm Sqm 220 1135.45 249799 15 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. Metre 22 163.65 3600.3 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.5 Bend 87.5 degrees 16 12.42.5.2 110 mm bend Each 8 132 1056 12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 17 12.51.6 Gutter (600 mm over all girth) Metre 18 1110.6 19990.8 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 18 13.2.2 1:6 (1 cement: 6 fine sand) Sqm 12 324.3 3891.6 13.63 Painting with aluminium paint of approved brand and manufacture to give an even shade . 19 13.63.1 Two or more coats on new work Sqm 170 121.45 20646.5 17.0 SANITARY INSTALLATIONS 17.35 Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm dia 20 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 Metre 24 1018.05 24433.2 17.36 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 21 17.36.2 100 mm dia pipe Each 24 163.45 3922.8 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 22 17.37.1 For 100 mm dia pipe Each 12 308.45 3701.4 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES .... more in document
