Public Administrative Department Local Bodies Closing in 0 days TDR #52017012

Tender For Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift U

Issued by Local Bodies · bhimtal, Uttarakhand
Tender Value
80.86 Lakhs
Estimated cost
Bid Submission
11 Nov 2025
0 days left
EMD
1.61 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
bhimtal → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. , Sand Filling In Plinth Including Supply Of Necessary Quantity Of Sand From A Distance Not Exceeding 8Km From The Site Of Work & Including Watering Dressing Ete. Rate To Include Cost Of All Materials, Labour And T & P Etc. Required For Proper Completion Of The Work. , Cement Concrete 1:4:8 (1 Cement: 4 Coarse Sand (Zone-Iii) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Damp-Proof Course 40Mm Thick With Cement Concrete 1:2:4 (1) Cement: 2 Coarse Saad (Zone-Iii) Derived From Natural Sources 4 Graded Stone Aggregate 2.5Mm Nominal Size Derived From Natural Sources) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In:Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement -All Work Up To Plinth Level :1:1.5:3 (1 Cement: 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources: 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete As Above But For Reinforced Cement Concrete Beams & Slab In 1:11/2:3. , Mild Steel Or Iron In Plain Work Such As In Reinforced Concrete Or Reinforced Brick Work Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of Steel Its Wastage. Bend Hooks And Authorized Overlapping Shall Be Measured. , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix:. 1:6 (1 Cement: 6 Coarse Sand) , 12 Mm. Thick Plaster With Cement Mortar Consisting Of Ipart Cement And 3 Part Of Approved Coarse Sand. Minimum Thickness Not To Be Less Than 10 Mm. Including Supply Of All Materials, Labour And T & P Etc. Required For Proper Completion Of Work. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , One Priming Coat Of Cement Primer And One Coat Oil Distemper On New Work Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. , Shuttering And Centering For Sup. Structure All Required Work Including All Cost Of T & P Etc. Complete Work As Per Building Specification And Direction Of ?/I. , Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate,Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Mild Steel Or Iron In Plain Work In Heavy Size Such As Trusses, Built Up Gates Record Racks Roof Works Gates Etc.Wrought To Requre From Including Drilling Holes Riveting Or Wending Whewre , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Construction Of Primer Applied @ 0.80 1Tr/10 Sqm Of Approved Brand And Manufacture , Edpm Track 15Mm Thickness , Providing And Fixing Neelgiri/Mexican Grass Turf With Earthy 50Mm To 60Mm Thickness Of Existing Ground Prepared With Proper Level And Ramming With Required Tools Wooden (Dhurmos) And Than Rolling The Surface With Light Roller Make The Surface Smoothen And Light, Watering With Sprinkler And Maintenance For 30 Days Or More Till The Grass Establish Properly As Per Direction Of Officer Incharge. (Dsr 2020 Holticulter) , Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineerin- Charge (Length Of Finished Kerb Edging Shall Be Measured To Calculate Volume For Payment). (Precast Cement Concrete Kerb Stone Shall Be Approved By Engineer-In-Charge). , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete With Float Glass Panes Of 5 Mm Thickness (Weight Notless Than 12.50 Kg/Sqm) As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is: 8183, Density 24Kg/M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing Corrugated 1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² G.S. Sheet Roofing Including Vertical/ Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpewashers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete.. , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters. 80X1.25 Mm M.S. Laths With 1.25 Mm Thick Top Cover , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1: 4 (1 Cement: 4 Coarse Sand): 25Mm Thick , Excavating, Supplying And Filling Of Local Earth (Including Royalty)By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 , Providing And Fixing Ist The Of Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By Manufacturer), Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm,Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300mm Or More (Thickness To Be Specified By The Manufacturer), Of 1Stquality Conforming To Is: 15622, Of Approved Make, In All Colours, Shadesexcept White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. , 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (±0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Tyles Of The Shutter -Reinforced By Inserting Galvanised M:87Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, N Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (±0.2 Mm) Wall Thickness, Fixed To The Shutter Styles By Means Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Manufacturers Specification And Direction Of Engineer-In-Charge. (For W.C. And Bathroom Door Shutter) , Providing And Fixing White Vitreous China Pedestal Type (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Geol The Walls And Floors Wherever Required: , Nahani Trap , Providing And Fixing C.P. Brass Angle Valve 15Mm Dia, For Basin Mixer And Geyser Points Of Apipraved, Quality Conforming To Is 8931 (Dsr.-2019) 18.53.1 , Providing And Fixing C.P. Brass Stop Cock 15Mm Dia(Concealed) Standerd Design Make Conforming To Is 8931 (Dsr.-2019) 18.52.1. , Providing And Fixing White Vitreous China Wash Basin Size White Vitreous China Flat Back Wash Basin Size 630X450 Mm With Single 15 Mm C.P. Brass Pillar Tap, Single 15Mm C.P. Brass Pillar Taps 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fitting And Brackets, Cutting And Making Good On Walls Floors Wherever Required. , Providing And Fixing Cpvc Pipes 100 Mm. Dia Having Thermal Stability For Hot &Cold Water Supply Including All Cpvc Plain & Brass Threaded Fitting This Includes Jointing Of Pipes & Fitting With One Step Cpvc Solvent Cement, Trenching Refilling, & Testing Of Joints Complete As Per Direction Of In Charge... , Providing And Fixing Cpvc Pipes 32Mm. Dia Having Thermal Stability For Hot &Cold Water Supply Including All Cpvc Plain & Brass Threaded Fitting This Includes Jointing Of Pipes & Fitting With One Step Cpvc Solvent Cement, Trenching Refilling, & Testing Of Joints Complete As Per Direction Of In Charge... , Providing And Fixing Cpvc Pipes 20Mm. Din Having Thermal Stability For Hot &Cold Water Supply Including All Cpvc Plain & Brass Threaded Fitting This Includes Jointing Of Pipes & Fitting With One Step Cpvc Solvent Cement, Trenching Refilling, & Testing Of Joints Complete As Per Direction Of In Charge.. , Providing And Fixing Gunmetal Gate Valve 32Mm Dia With C.I. Wheel Of Approved Quality (Screwed End) , Metal Gate Valve 20Mm Dia Providing And Fixing Gun With C.I. Wheel Of Approved Quality (Screwed End) , Water Tanks 500 L.Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is :12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. , Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm. Diameter, 1.8 M Long Complete With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 As Per Standard Design. , Wiring Point For Light/Fan Point/Exast Fan Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Single Core Cable In Surface /Recessed Steel Conduit, With Piano Type Switch Fenolic Laminated Sheet, Suitable Size Ms Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Single Core Cable Etc. As Required. Group A , Wiring For Light/Power Plug With 4 Sq. Mm Frls Pvc Insulated Copper Conductore Single Core Core Cable In Surface /Recessed Steel Conduit, Alongwith 2Nos. 4Sq. Mm Frls Pvc Insulated Copper Single Core Cable For Loop Earthing Etc. As Required. , Wiring For Circuit/Submain Wiring Alongwith Earth Wire With 3Nos 2.5Sq. Mm Size Of Frls Pvc Insulated Copper Conductore Single Core Core Cable In Surface/Recessed Steel Conduit, Etc. As Required. , Earthing With G.I. Earth Pipe 4.5 Meter Long, 40Mm Dia Including Accessories, And Providing Masonary Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc With Charcoal/Coke And Salt As Required.Etc. , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connection Etc. As Required , Supply And Fixing Of 4Way (4+12) Double Door Ways Surface/Recess Mounting, Vertical Type, 415V Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected,Duly Powder Painted Inclusive Of 200 A. Tinned Copper Bus Bar Common Natural Link, Earth Bar Din Bar For Mounting Mcbs As Required. , Supplying And Fixing Tp Sheet Steel Enclosure On Surface/Recess Along With 32 A, 415 V C Curve Tp Mcb Complete With Connections, Testing And Commissioning Etc. As Required , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. , Sand Filling In Plinth Including Supply Of Necessary Quantity Of Sand From A Distance Not Exceeding 8Km From The Site Of Work & Including Watering Dressing Ete. Rate To Include Cost Of All Materials, Labour And T & P Etc. Required For Proper Completion Of The Work. , Cement Concrete 1:4:8 (1 Cement: 4 Coarse Sand (Zone-Iii) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2 Cm. Guage Approved Stone Ballast In The Proportion 1:1.5:3 In Raft Foundation And Footing, Reinforced Cement Concrete Beams & Slab Lintel Of The Doors And Windows, Excluding Supply Of Reinfocement & Its Bending But Including Its Fixing And Binding The Same With 24 B.W.G. G.I. Binding Wire & Including Necessary Centring & Shuttering Etc. And Also Including S/O All Materials Required For Proper Completion Of The Work. Binding Wire To Be Supplied By The Contractor Free Of Construction , Mild Steel Or Iron In Plain Work Such As In Reinforced Concrete Or Reinforced Brick Work Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of Steel Its Wastage. Bend Hooks And Authorized Overlapping Shall Be Measured. , 12 Mm. Thick Plaster With Cement Mortar Consisting Of Ipart Cement And 3 Part Of Approved Coarse Sand. Minimum Thickness Not To Be Less Than 10 Mm. Including Supply Of All Materials, Labour And T & P Etc. Required For Proper Completion Of Work. , Shuttering And Centering For Sup. Structure All Required Work Including All Cost Of T & P Etc. Complete Work As Per Building Specification And Direction Of ?/I. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , One Priming Coat Of Cement Primer And One Coat Oil Distemper On New Work Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. , Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up To Plinth Level 1:4:8 (1) Cement: 4 Coarse Sand: 8 Graded Stone Aggregate 40 Mm Nominal Size). , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per As Per Clause 1500 & 1700 Of Mort&H Specification Including All Material, Labour, Machinery (Note: Cement Content Consideredin This Item Is @ 330 Kg/Cum.Excess/ Less , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Steel Mechanically Treated Bars. Of Grade Fe-500D Or More. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights: Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :7.7.1 Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , Coursed Rubble Masonry With Hard Stone (First Or Second Sort) In Superstructure Above Plinth Level And Upto Floor Five Level. Masonry Work (First Sort), In Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In:Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix:. 1:6 (1 Cement: 6 Coarse Sand) , Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 12.52.3 12.5 Mm Thick Square Edge Pvc Laminated Gypsum Tile Of Size 595X595 Mm, Made Of Gypsum Plasterboard, Manufactured From Natural Gypsum As Per Is 2095 Part I And Laminated With White 0.16Mm Thick Fire Retardant Pvc Film On The Face Side And 12Micron Metalized Polyester On The Back Side With All Edges Sealed With The Face Side Pvc Film Which Goes Around And Wraps The Edges And Is Bonded To The Edges And The Back Side Metalized Polyester Film So As To Make The Tile A Completely Sealed Unit.595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections (Galvanized @ 120 Grams/Sqm, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gl , Installation Of Pvc Ward Latter With Led Light , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1) Cement: 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete All Levels. , Bush Rose In Different Colour 2 To 3 Healthy Branch 30 Cm And Above Ht. Well With Developed 8 Or More Flowers / Flower Buds In 20 Cm Earthen Pot / Plastic Pot As Per Direction Of The Officer-In-Charge , Providing And Displaying Bougainvillea Named Variety, Sobhra, Thima, Marry Palmar, Cherry Blossom Etc. Well Developed With Fresh & Healthy Bushy In Full Bloom 75 To 90 Cm Ht. In 40 Cm Cement Pot As Per Direction Of The Officer-In-Charge. , Supplying Of Marri Gold Flower- 50 Each Tray , Supplying Of Poppy Flower -50 Each Tray , Supplying Of Salvia Hybrid Different Colour 50 Each Tray , Supplying Of Daisy Flowers 50 Each Tray , Supplying Of Dahlia Double Flowers 50 Each Tray , Deodar Trees , Tulips , Supply And Fixing Of Solar Lights Min 20W Mounted On Minimum 7M High Pole With Pole Box And Panel , R O Based Water Treatment Unit , Benches , Twin Bin , Camera , Camera Installation , Fountains With Lights , Wooden Gazebo , Animal Sculptures , Kids Playing Equipments (Sliding, Swing, See-Show, Marry Go Round)

BOQ

Name of Work:-
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
2Sand filling in plinth including supply of necessary quantity of Sand from a distance not exceeding 8km from the site of work & including Watering dressing ete. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work.
3C.C. 1:4:8 (1 cement: 4 coarse sand (zone-iii) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1) cement: 2 coarse saad (zone-III) derived from natural sources 4 graded stone aggregate 2.5mm nominal size derived from natural sources)
5Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand)
6Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement: 6 coarse sand)
7Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand (zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)
8RCC as above but for RCC beams & slab in 1:11/2:3.
9Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured.
1015 mm cement plaster on rough side of single or half brick wall of mix:. 1:6 (1 cement: 6 coarse sand)
1112 mm. thick plaster with cement mortar consisting of Ipart cement and 3 part of approved coarse sand. Minimum thickness not to be less than 10 mm. including supply of all materials, labour and T & P etc. required for proper completion of work.
12Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
13One priming coat of cement primer and one coat oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
14Shuttering and centering for Sup. Structure all required work including all cost of T & P etc. complete work as per building specification and direction of Е/I.
15Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
16Mild steel or iron in plain work in heavy size such as trusses, built up gates record racks roof works gates etc.wrought to requre from including drilling holes riveting or wending whewre
17Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under cont of primer applied @ 0.80 1tr/10 sqm of approved brand and manufacture
18EDPM TRACK 15MM THICKNESS
19Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. (dsr 2020 Holticulter)
20Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
21Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete With float glass panes of 5 mm thickness (weight notless than 12.50 kg/sqm) as per the architectural drawings and the directions of engineer-in-charge.
22Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183, density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.
23Providing corrugated 1.00 mm thick with zinc coating not less than 275 gm/m² G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpewashers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete..
24Supplying and fixing Rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
25Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand): 25mm thick
26Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20
27Providing and fixing Ist the of quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by manufacturer), approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.
28Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS: 15622, of approved make, in all colours, shadesexcept White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
2924 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The tyles of the shutter -reinforced by inserting galvanised M:87tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of \"H\" section, n uPVC hollow section of size 100x24 mm and 2 mm (±0.2 mm) wall thickness, fixed to the shutter styles by means plastic/galvanised M.S. \"U\" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as manufacturer\"s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter)
30Providing and fixing white vitreous china pedestal type (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making geol the walls and floors wherever required:
31NAHANI TRAP
32Providing and fixing C.P. brass angle valve 15mm dia, for basin mixer and geyser points of apipraved, quality conforming to IS 8931 (DSR.-2019) 18.53.1
33Providing and fixing C.P. brass stop cock 15mm dia(concealed) standerd design make conforming to IS 8931 (DSR.-2019) 18.52.1.
34Providing and fixing white vitreous china wash basin size White Vitreous China Flat back wash basin size 630x450 mm with single 15 mm C.P. brass pillar tap, single 15mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good on walls floors wherever required.
35Providing and fixing CPVC pipes 100 mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge...
36Providing and fixing CPVC pipes 32mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge...
37Providing and fixing CPVC pipes 20mm. din having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge..
38Providing and fixing gunmetal gate valve 32mm dia with C.I. wheel of approved quality (screwed end)
39metal gate valve 20mm dia Providing and fixing gun with C.I. wheel of approved quality (screwed end)
40water tanks 500 L.Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS :12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
41Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm. diameter, 1.8 m long complete With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per standard design.
42Wiring point for light/fan point/exast fan point with 1.5 sq.mm FRLS PVC insulated copper single core cable in surface /recessed steel conduit, with piano type switch fenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper single core cable etc. as required. Group A
43Wiring for light/power plug with 4 sq. mm FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, alongwith 2Nos. 4sq. mm FRLS PVC insulated copper single core cable for loop earthing etc. as required.
44Wiring for circuit/submain wiring alongwith earth wire with 3nos 2.5sq. mm size of FRLS PVC insulated copper conductore single core core cable in surface/recessed steel conduit, etc. as required.
45Earthing with G.I. earth pipe 4.5 meter long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required.etc.
46Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc. as required
47Supply and fixing of 4way (4+12) double door ways surface/recess mounting, vertical type, 415V TPN MCB distribution board of sheet steel, dust protected,duly powder painted inclusive of 200 A. tinned copper bus bar common natural link, earth bar din bar for mounting MCBs as required.
48Supplying and fixing TP sheet steel enclosure on surface/recess along with 32 A, 415 V \"C\" curve TP MCB complete with connections, testing and commissioning etc. as required
49Earth work in excavation by mechanical means (Hydraulic excavator) manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
50Sand filling in plinth including supply of necessary quantity of Sand from a distance not exceeding 8km from the site of work & including Watering dressing ete. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work.
51C.C. 1:4:8 (1 cement: 4 coarse sand (zone-iii) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)
52R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone ballast in the proportion 1:1.5:3 in raft foundation and footing, RCC beams & slab lintel of the doors and windows, excluding supply of reinfocement & its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire & including necessary centring & shuttering etc. and also including s/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.
53Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured.
5412 mm. thick plaster with cement mortar consisting of Ipart cement and 3 part of approved coarse sand. Minimum thickness not to be less than 10 mm. including supply of all materials, labour and T & P etc. required for proper completion of work.
55Shuttering and centering for Sup. Structure all required work including all cost of T & P etc. complete work as per building specification and direction of Е/I.
56Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
57One priming coat of cement primer and one coat oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
58Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge
59Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1:4:8 (1) Cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size).
60Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per as per clause 1500 & 1700 of MoRT&H specification including all material, labour, machinery \"(Note: Cement content consideredin this item is @ 330 kg/cum.\"Excess/ less
61Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Steel Mechanically Treated bars. of grade Fe-500D or more.
62Centering and shuttering including strutting, propping etc. and removal of form for all heights: Foundations, footings, bases of columns, etc. for mass concrete
63Suspended floors, roofs, landings, balconies and access platform
64Coursed rubble masonry (second sort) with hard stone in foundation & plinth with :7.7.1 Cement mortar 1:6 (1 cement: 6 coarse sand)
65Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (first sort), in cement mortar 1:6 (1 cement: 6 coarse sand)
66Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement: 6 coarse sand)
6715 mm cement plaster on rough side of single or half brick wall of mix:. 1:6 (1 cement: 6 coarse sand)
68Providing and fixing tiled false ceiling of specified materials of size 12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl
69installation of pvc ward latter with led light
70Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1) cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all levels.
71Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well with developed 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge
72Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
73supplying of marri gold flower- 50 each tray
74supplying of poppy flower -50 each tray
75supplying of Salvia Hybrid different colour 50 each tray
76supplying of daisy flowers 50 each tray
77supplying of Dahlia double flowers 50 each tray
78Deodar Trees
79Tulips
80Supply and fixing of Solar Lights min 20w mounted on minimum 7m high pole with pole box and panel
81R O Based Water treatment unit
82Benches
83Twin bin
84Camera
85Camera installation
86Fountains with lights
87Wooden Gazebo
88Animal Sculptures
89Kids playing equipments (Sliding, Swing, See-Show, Marry Go Round) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 52017012
AUTHORITY Local Bodies
TENDER VALUE 80.86 Lakhs
LAST DATE 11-11-2025
Authority
Authority Name Nagar Palika Parishad
Work Description Tender For Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. , Sand Filling In Plinth Including Supply Of Necessary Quantity Of Sand From A Distance Not Exceeding 8Km From The Site Of Work & Including Watering Dressing Ete. Rate To Include Cost Of All Materials, Labour And T & P Etc. Required For Proper Completion Of The Work. , Cement Concrete 1:4:8 (1 Cement: 4 Coarse Sand (Zone-Iii) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Damp-Proof Course 40Mm Thick With Cement Concrete 1:2:4 (1) Cement: 2 Coarse Saad (Zone-Iii) Derived From Natural Sources 4 Graded Stone Aggregate 2.5Mm Nominal Size Derived From Natural Sources) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In:Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement -All Work Up To Plinth Level :1:1.5:3 (1 Cement: 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources: 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete As Above But For Reinforced Cement Concrete Beams & Slab In 1:11/2:3. , Mild Steel Or Iron In Plain Work Such As In Reinforced Concrete Or Reinforced Brick Work Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of Steel Its Wastage. Bend Hooks And Authorized Overlapping Shall Be Measured. , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix:. 1:6 (1 Cement: 6 Coarse Sand) , 12 Mm. Thick Plaster With Cement Mortar Consisting Of Ipart Cement And 3 Part Of Approved Coarse Sand. Minimum Thickness Not To Be Less Than 10 Mm. Including Supply Of All Materials, Labour And T & P Etc. Required For Proper Completion Of Work. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , One Priming Coat Of Cement Primer And One Coat Oil Distemper On New Work Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. , Shuttering And Centering For Sup. Structure All Required Work Including All Cost Of T & P Etc. Complete Work As Per Building Specification And Direction Of ?/I. , Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate,Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Mild Steel Or Iron In Plain Work In Heavy Size Such As Trusses, Built Up Gates Record Racks Roof Works Gates Etc.Wrought To Requre From Including Drilling Holes Riveting Or Wending Whewre , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Construction Of Primer Applied @ 0.80 1Tr/10 Sqm Of Approved Brand And Manufacture , Edpm Track 15Mm Thickness , Providing And Fixing Neelgiri/Mexican Grass Turf With Earthy 50Mm To 60Mm Thickness Of Existing Ground Prepared With Proper Level And Ramming With Required Tools Wooden (Dhurmos) And Than Rolling The Surface With Light Roller Make The Surface Smoothen And Light, Watering With Sprinkler And Maintenance For 30 Days Or More Till The Grass Establish Properly As Per Direction Of Officer Incharge. (Dsr 2020 Holticulter) , Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineerin- Charge (Length Of Finished Kerb Edging Shall Be Measured To Calculate Volume For Payment). (Precast Cement Concrete Kerb Stone Shall Be Approved By Engineer-In-Charge). , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete With Float Glass Panes Of 5 Mm Thickness (Weight Notless Than 12.50 Kg/Sqm) As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is: 8183, Density 24Kg/M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing Corrugated 1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² G.S. Sheet Roofing Including Vertical/ Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpewashers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete.. , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters. 80X1.25 Mm M.S. Laths With 1.25 Mm Thick Top Cover , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1: 4 (1 Cement: 4 Coarse Sand): 25Mm Thick , Excavating, Supplying And Filling Of Local Earth (Including Royalty)By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 , Providing And Fixing Ist The Of Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By Manufacturer), Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm,Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300mm Or More (Thickness To Be Specified By The Manufacturer), Of 1Stquality Conforming To Is: 15622, Of Approved Make, In All Colours, Shadesexcept White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. , 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm (±0.2 Mm) With Inbuilt Edging On Both Sides. The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised/Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws. The Tyles Of The Shutter -Reinforced By Inserting Galvanised M:87Tube Of Size 20X20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Lock Rail Made Up Of H Section, N Upvc Hollow Section Of Size 100X24 Mm And 2 Mm (±0.2 Mm) Wall Thickness, Fixed To The Shutter Styles By Means Plastic/Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm (± 0.1 Mm) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Manufacturers Specification And Direction Of Engineer-In-Charge. (For W.C. And Bathroom Door Shutter) , Providing And Fixing White Vitreous China Pedestal Type (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Geol The Walls And Floors Wherever Required: , Nahani Trap , Providing And Fixing C.P. Brass Angle Valve 15Mm Dia, For Basin Mixer And Geyser Points Of Apipraved, Quality Conforming To Is 8931 (Dsr.-2019) 18.53.1 , Providing And Fixing C.P. Brass Stop Cock 15Mm Dia(Concealed) Standerd Design Make Conforming To Is 8931 (Dsr.-2019) 18.52.1. , Providing And Fixing White Vitreous China Wash Basin Size White Vitreous China Flat Back Wash Basin Size 630X450 Mm With Single 15 Mm C.P. Brass Pillar Tap, Single 15Mm C.P. Brass Pillar Taps 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fitting And Brackets, Cutting And Making Good On Walls Floors Wherever Required. , Providing And Fixing Cpvc Pipes 100 Mm. Dia Having Thermal Stability For Hot &Cold Water Supply Including All Cpvc Plain & Brass Threaded Fitting This Includes Jointing Of Pipes & Fitting With One Step Cpvc Solvent Cement, Trenching Refilling, & Testing Of Joints Complete As Per Direction Of In Charge... , Providing And Fixing Cpvc Pipes 32Mm. Dia Having Thermal Stability For Hot &Cold Water Supply Including All Cpvc Plain & Brass Threaded Fitting This Includes Jointing Of Pipes & Fitting With One Step Cpvc Solvent Cement, Trenching Refilling, & Testing Of Joints Complete As Per Direction Of In Charge... , Providing And Fixing Cpvc Pipes 20Mm. Din Having Thermal Stability For Hot &Cold Water Supply Including All Cpvc Plain & Brass Threaded Fitting This Includes Jointing Of Pipes & Fitting With One Step Cpvc Solvent Cement, Trenching Refilling, & Testing Of Joints Complete As Per Direction Of In Charge.. , Providing And Fixing Gunmetal Gate Valve 32Mm Dia With C.I. Wheel Of Approved Quality (Screwed End) , Metal Gate Valve 20Mm Dia Providing And Fixing Gun With C.I. Wheel Of Approved Quality (Screwed End) , Water Tanks 500 L.Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is :12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. , Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm. Diameter, 1.8 M Long Complete With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 As Per Standard Design. , Wiring Point For Light/Fan Point/Exast Fan Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Single Core Cable In Surface /Recessed Steel Conduit, With Piano Type Switch Fenolic Laminated Sheet, Suitable Size Ms Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Single Core Cable Etc. As Required. Group A , Wiring For Light/Power Plug With 4 Sq. Mm Frls Pvc Insulated Copper Conductore Single Core Core Cable In Surface /Recessed Steel Conduit, Alongwith 2Nos. 4Sq. Mm Frls Pvc Insulated Copper Single Core Cable For Loop Earthing Etc. As Required. , Wiring For Circuit/Submain Wiring Alongwith Earth Wire With 3Nos 2.5Sq. Mm Size Of Frls Pvc Insulated Copper Conductore Single Core Core Cable In Surface/Recessed Steel Conduit, Etc. As Required. , Earthing With G.I. Earth Pipe 4.5 Meter Long, 40Mm Dia Including Accessories, And Providing Masonary Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc With Charcoal/Coke And Salt As Required.Etc. , Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connection Etc. As Required , Supply And Fixing Of 4Way (4+12) Double Door Ways Surface/Recess Mounting, Vertical Type, 415V Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected,Duly Powder Painted Inclusive Of 200 A. Tinned Copper Bus Bar Common Natural Link, Earth Bar Din Bar For Mounting Mcbs As Required. , Supplying And Fixing Tp Sheet Steel Enclosure On Surface/Recess Along With 32 A, 415 V C Curve Tp Mcb Complete With Connections, Testing And Commissioning Etc. As Required , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. , Sand Filling In Plinth Including Supply Of Necessary Quantity Of Sand From A Distance Not Exceeding 8Km From The Site Of Work & Including Watering Dressing Ete. Rate To Include Cost Of All Materials, Labour And T & P Etc. Required For Proper Completion Of The Work. , Cement Concrete 1:4:8 (1 Cement: 4 Coarse Sand (Zone-Iii) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2 Cm. Guage Approved Stone Ballast In The Proportion 1:1.5:3 In Raft Foundation And Footing, Reinforced Cement Concrete Beams & Slab Lintel Of The Doors And Windows, Excluding Supply Of Reinfocement & Its Bending But Including Its Fixing And Binding The Same With 24 B.W.G. G.I. Binding Wire & Including Necessary Centring & Shuttering Etc. And Also Including S/O All Materials Required For Proper Completion Of The Work. Binding Wire To Be Supplied By The Contractor Free Of Construction , Mild Steel Or Iron In Plain Work Such As In Reinforced Concrete Or Reinforced Brick Work Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of Steel Its Wastage. Bend Hooks And Authorized Overlapping Shall Be Measured. , 12 Mm. Thick Plaster With Cement Mortar Consisting Of Ipart Cement And 3 Part Of Approved Coarse Sand. Minimum Thickness Not To Be Less Than 10 Mm. Including Supply Of All Materials, Labour And T & P Etc. Required For Proper Completion Of Work. , Shuttering And Centering For Sup. Structure All Required Work Including All Cost Of T & P Etc. Complete Work As Per Building Specification And Direction Of ?/I. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , One Priming Coat Of Cement Primer And One Coat Oil Distemper On New Work Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. , Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering All Work Up To Plinth Level 1:4:8 (1) Cement: 4 Coarse Sand: 8 Graded Stone Aggregate 40 Mm Nominal Size). , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per As Per Clause 1500 & 1700 Of Mort&H Specification Including All Material, Labour, Machinery (Note: Cement Content Consideredin This Item Is @ 330 Kg/Cum.Excess/ Less , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Steel Mechanically Treated Bars. Of Grade Fe-500D Or More. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights: Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :7.7.1 Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , Coursed Rubble Masonry With Hard Stone (First Or Second Sort) In Superstructure Above Plinth Level And Upto Floor Five Level. Masonry Work (First Sort), In Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In:Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix:. 1:6 (1 Cement: 6 Coarse Sand) , Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 12.52.3 12.5 Mm Thick Square Edge Pvc Laminated Gypsum Tile Of Size 595X595 Mm, Made Of Gypsum Plasterboard, Manufactured From Natural Gypsum As Per Is 2095 Part I And Laminated With White 0.16Mm Thick Fire Retardant Pvc Film On The Face Side And 12Micron Metalized Polyester On The Back Side With All Edges Sealed With The Face Side Pvc Film Which Goes Around And Wraps The Edges And Is Bonded To The Edges And The Back Side Metalized Polyester Film So As To Make The Tile A Completely Sealed Unit.595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections (Galvanized @ 120 Grams/Sqm, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gl , Installation Of Pvc Ward Latter With Led Light , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1) Cement: 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete All Levels. , Bush Rose In Different Colour 2 To 3 Healthy Branch 30 Cm And Above Ht. Well With Developed 8 Or More Flowers / Flower Buds In 20 Cm Earthen Pot / Plastic Pot As Per Direction Of The Officer-In-Charge , Providing And Displaying Bougainvillea Named Variety, Sobhra, Thima, Marry Palmar, Cherry Blossom Etc. Well Developed With Fresh & Healthy Bushy In Full Bloom 75 To 90 Cm Ht. In 40 Cm Cement Pot As Per Direction Of The Officer-In-Charge. , Supplying Of Marri Gold Flower- 50 Each Tray , Supplying Of Poppy Flower -50 Each Tray , Supplying Of Salvia Hybrid Different Colour 50 Each Tray , Supplying Of Daisy Flowers 50 Each Tray , Supplying Of Dahlia Double Flowers 50 Each Tray , Deodar Trees , Tulips , Supply And Fixing Of Solar Lights Min 20W Mounted On Minimum 7M High Pole With Pole Box And Panel , R O Based Water Treatment Unit , Benches , Twin Bin , Camera , Camera Installation , Fountains With Lights , Wooden Gazebo , Animal Sculptures , Kids Playing Equipments (Sliding, Swing, See-Show, Marry Go Round)
Basic Detail
Tender No 393/NPP/2025-26 25-10-2025
Bidding Type Tender
Location
City bhimtal
State Uttarakhand
Key Dates
Publish Date 28 Oct 2025
Submission Date 11 Nov 2025
Open Date 11 Nov 2025
Finance
Tender Value 80.86 Lakhs
Tender Fee 5900
EMD 1.61 Lakhs
Exemption Not Available
Document List
af94b628-0d3f-46e4-baea-8c31981dbfcb.html
BOQ_104849.xls
SBD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 28, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 11, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 11, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

af94b628-0d3f-46e4-baea-8c31981dbfcb.html

xls

BOQ_104849.xls

pdf

SBD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders