Tender For Supply And Fixing Of Recycled Plastic Products For West To Wonder Park At Major Shaitansingh Stadium Phalodi - Fabrication, Supply, and Installation of Hanuman Ji Sculpture made from scrap metal and ball bearings, having an approximate height of 7.5 to 8 feet and weight between 550 to 650 kg, including the following technical components and works: • Structure made using MS angles 40x40x5 mm, round bars Ø12–20 mm, and MS sheet scrap and bearings welded to form the outer contour. • Full welding, grinding, and finishing of all joints to ensure smooth surface without sharp projections. • Application of anti-rust red oxide primer and metallic weather-resistant enamel paint on the complete sculpture. • Excavation for foundation up to 1.5 ft depth, PCC work (1:2:4) for base, and MS base plate 10 mm thick with M16 foundation bolts. • Complete fixing and erection at site, including all tools, tackles, and safety measures. ( 7.5 - 8 Feet) 2 Fabrication, Supply, and Installation of Dancing Girl Sculpture inspired by Harappan Civilization, made entirely from scrap metal and recycled components, having an approximate height of 7.5 to 8 feet and overall weight between 550 to 650 kg, including the following: • Structural framework fabricated using MS angles 40x40x5 mm and round bars Ø12–20 mm, designed to maintain the proportion and balance of the sculpture. • Outer surface formed using assorted MS scrap parts, metal sheets, and ball bearings, fully welded and ground to a uniform profile. • Application of anti-rust red oxide primer followed by metallic weather-resistant paint for long-term corrosion protection and uniform surface finish. • Foundation and fixing work comprising earth excavation up to 1.5 ft, PCC base (1:2:4), MS base plate 10 mm thick, and M16 foundation bolts for permanent anchoring. • Includes complete onsite erection, alignment, and welding/bolting work with all required tools, tackles, and safety precautions 3 Fabrication, Supply, and Installation of Gabion Artwork forming the letters “HMC”, constructed using scrap iron rods and mesh structure, with infill of C&D waste pebbles or stone aggregates, including the following technical components and works: • Overall height of 3 to 4 feet and width of approximately 3 feet per letter, with a combined structure weight of around 600 kg. • Frame made of MS rods (Ø8–12 mm) and MS angle 35x35x5 mm, fabricated into gabion-type wire mesh boxes forming the letter contours. • Internal filling with C&D waste pebbles or similar size stones (40–80 mm) compactly placed to ensure structural stability and visual consistency. • Base support work including PCC (1:2:4) or RCC base slab (M20 grade) depending on site condition, ensuring level and load-bearing surface. • Complete fixing and installation at site, including alignment, welding, and anchoring to base using suitable foundation bolts. • Anti-corrosive coating (red oxide primer and enamel paint) on all exposed metal members for rust protection. • Work includes all materials, labour, tools, and equipment required for fabrication, transportation, and installation as per standard engineering practices. 4 Fabrication, Supply, and Installation of Sheep Sculptures made using stone bodies with scrap metal heads and legs, designed as waste-to-art installations, including the following components and works: • Overall height of each sculpture approximately 2 feet, with a total weight of 200–300 kg per unit. • Body constructed from natural stone blocks (granite/sandstone) shaped and finished to the required contour using mechanical cutting and polishing tools. • Head and legs fabricated from MS scrap parts, rods, and plates (thickness 3–5 mm), welded and ground to achieve defined shapes, integrated securely with the stone body through embedded anchor rods (Ø12 mm) and metal adhesive bonding. • All metal components coated with red oxide primer followed by weather-resistant enamel paint for rust protection. • Foundation and placement work including PCC bed (1:2:4) for each sculpture to ensure stability on site. • Includes complete installation, fixing, finishing, and handling of all materials, labour, and equipment as per standard engineering and safety practices. 5 Fabrication, Supply, and Installation of “Map of India” Sculpture made entirely from scrap metal and recycled components, having an overall dimension of approximately 9 ft × 7 ft, including the following technical works and specifications: • Framework structure fabricated using MS angles 40x40x5 mm and round bars Ø10–20 mm, providing stability and maintaining the outline of the map. • Surface created using MS scrap sheets, metal pieces, and other waste metal components, welded and ground to form a continuous artistic texture. • All weld joints made continuous, ground smooth, and finished for uniform appearance and safety. • Application of anti-rust red oxide primer followed by weather-resistant metallic enamel paint on the entire surface for corrosion resistance. • Foundation and base work including earth excavation up to 1.5 ft, RCC base (M20 grade), and MS base plate (10 mm thick) anchored using M16 foundation bolts for permanent stability. • Installation and alignment at site with all required labour, materials, tools, and safety measures as per standard fabrication and installation practice. 6 Fabrication, Supply, and Placement of Tyre-Waste Sofa & Table Set, made entirely from recycled vehicle tyres and scrap materials, comprising 4 single-seater sofas and 1 round table, including the following technical components and works: • Sofa frame made using used vehicle tyres (nylon/radial type) stacked and bolted with MS flat bars (40x6 mm) and MS round rods Ø10 mm for stability. • Table top formed using cut tyres and metal base frame, with MS circular ring (Ø25 mm rod) and MS sheet top (3 mm thick) for rigidity. • All joints fixed using arc welding and mechanical fasteners as required for structural strength. • Surface cleaning, buffing, and coating with black weather-resistant rubber paint for a uniform and durable finish. • Cushion seating (if included) to be fabricated using PU foam with rexine cover fitted over a plywood base (12 mm thick). • Includes complete fabrication, finishing, and delivery at site, with all necessary labour, materials, tools, and handling charges. 7 Fabrication, Supply, and Installation of Colour Palette Artwork with Paint Brush, made entirely from scrap metal components, having an approximate height of 2–3 feet and width of 7–9 feet, with an overall weight of 300–400 kg, including the following works: • Framework fabrication using MS angles 35x35x5 mm and MS round bars Ø10–16 mm, providing structural rigidity and contour for the palette and attached brush. • Outer body and detailing made from MS scrap plates (3–5 mm thick) and recycled metal parts, fully welded and ground for smooth finish. • Paint brush element integrated as part of the structure, made of scrap rods, sheet metal, and pipe sections to replicate form and scale proportionate to the palette. • Anti-rust treatment with red oxide primer followed by weather-resistant enamel paint applied over the complete structure for corrosion protection. • Foundation work comprising earth excavation up to 1.5 ft, PCC (1:2:4) base, and MS base plate (10 mm thick)anchored with M16 foundation bolts for stability and secure installation. • Includes complete fabrication, transportation, erection, alignment, and finishing with all materials, labour, and tools as per standard engineering practices. 8 Fabrication, Supply, and Installation of Bouquet-Shaped Curved Sculpture with Integrated Lighting, made entirely from scrap metal and recycled components, having an approximate height of 10–12 ft, including the following technical works: • Structural framework fabricated using MS angles (40x40x5 mm), MS round bars (Ø12–20 mm), and scrap metal sheets (3–5 mm thick) to form the curved bouquet structure. • Surface elements made from scrap metal pieces, welded and ground to form smooth contours and details of the bouquet. • Integrated lighting system mounted on the sculpture, including LED fixtures, metal holders, and concealed wiring, with all electrical connections following standard safety practices (non-functional load-bearing). • Anti-corrosion treatment with red oxide primer followed by weather-resistant metallic enamel paint over the entire sculpture. • Foundation work including earth excavation up to 2 ft, PCC (1:2:4) or RCC base (M20 grade), and MS base plate (10 mm thick) anchored with M16 foundation bolts for permanent fixing. • Includes complete fabrication, transportation, site erection, alignment, finishing, and installation of lighting, with all materials, labour, tools, and equipment as per standard engineering and safety practices. 9 Fabrication, Supply, and Installation of Metal Cube Sculpture, made entirely from scrap metal and recycled components, with overall dimensions of 5 ft × 5 ft × 5 ft, including the following technical works: • Structural framework fabricated using MS angles (40x40x5 mm) and MS round bars (Ø12–16 mm) to form the cube skeleton.
