Tender For Day To Day Maintenance Of Internal Electrification Of Otm In Zone-Ii Under Ge (West) Jrc; 1 Attending of complaints from 0800 hrs to 1800 hrs by deployingelectrician along with helpersfor checking of existing electrical items including carried otr minor repair such as changing of fuse, starter, rod, small pieces of wire etc carrying out repairs such as tighining of lose electric connections, nuts, bolts, screws, switches, sockets, switch boards ceiling fans/exhaust fan etc as required to make the item functional and to ensure contiunous electric supply complete as specified and directed. Note:(a) Replacement of electric fitting shall mesured andpaid for seperately under respective items(b) Rate quoted deemed to be inclusive of T&P etc.(c) The safteyand insurance of persons/helper engaged in execution shall be responsibility of contractor.(d) As the Nos of complaints shall be on required basis the financial effect to this is deemed to be included in the rate quoted.(e) Penalty Rs 100/- per complaint per day be charged if complaint not rectified within 24 hours 2 Taking down carefully aluminium / copper point wiring (light / fan / socket or power) while not disturbing existing conduit complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls and floors. 3 Taking down sub main wiring of two single core PVC cable PVC insulated4 / 6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed by Engineer-in-Charge. 4 Taking down main switch / DB and making good the disturbed surface as directed by Engineer-In-Charge. 5 M&L for point wiring with 1.5 sqmm, PVC insulated but sheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit medium grade 20mm dia (minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc/ fittings ISI marked for modular fittings andbrass screws and cup washers including 1.5 sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed.Note : Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respective items)(a)Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push. 6 (b) One socket outet point 5 amps on the same board. 7 (c) One socket outet point 5 amps on the independent board. 8 All as per Ser item 5.00 here in before but with 2.5 sq mm wire and earth wire (green colour) of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet. 9 Supply and fixing modular metal flush box 1/2 module complete all as specified and directed. 10 Supply and fixing modular metal flush box 3 module complete all as specified and directed. 11 Supply and fixing modular metal flush box 4 module complete all as specified and directed. 12 Supply and fixing modular metal flush box 6 module complete all as specified and directed. 13 Supply and fixing modular metal flush box 8 module complete all as specified and directed. 14 Supply and fixing modular metal flush box 12 module complete all as specified and directed. 15 Supply and fixing modular white cover plate with frame, 1 module complete all as specified and directed. 16 Supply and fixing modular white cover plate with frame, 2 module complete all as specified and directed. 17 Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed. 18 Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed. 19 Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed. 20 Supply and fixing modular white cover plate with frame, 8 module complete all as specified and directed. 21 Supply and fixing modular white cover plate with frame,12 module complete all as specified and directed. 22 Supply and fixing modular Dummy plate complete all as specified and directed. 23 Supply and fix in repair Modular switch 6 Amps single pole one way 24 Supply and fix in repair Modular switch 16 Amps single pole one way 25 Supply and fix in repair Modular bell bush 5 Amps 26 Supply and fix Modular multi socket 3 pin and 2 pin 6 Amps round and flat 27 Supply and fix in repairModular socket 6A /16 A Twin socket heavy duty 28 M&L for point wiring in repair with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified.a) One light / fan / call bell point controlled by one, one way switch. 29 b) All as per Ser item No 28.00 above but for 5 amps socket on independent board 30 c) All as per Ser item No 28.00 above but for 5 amps socket on same board 31 All as per Ser item No 28.00 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed. 32 M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into existing PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified.(a) One light / fan / call bell point controlled by one, one way switch. 33 (b) All as per Ser item No 32.00 above but for 5 amps socket on independent board 34 (c) All as per Ser item No 32.00 above but for 5 amps socket on same board 35 All as per Ser item No 32.00 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed. 36 Supply & fixing in repair switch piano flush button type single pole one way 5 Amps all as specified. 37 All as per Ser item No 36.00 above but single pole 5 Amps two way all asspecified. 38 Supply & fixing in repair bell push single pole 5 Amps all as specified. 39 Supply & fixing in repair switch piano flushbutton type single pole 15 Amps. 40 Supply & fixing in repair socket outlet5 Amp flush button type all as specified. 41 All as per item 40.00 here-in-before but 6 pin 5/15 Amps multi type. 42 Supply & fixing in repair ceiling roses surfaces bakelite two three terminals 65 x 50 mm all as specified. 43 Supply & fixingin repair lamp holder PVC, insulated body with back plate suitable for batten fittings along with 9 watt LED lamp all as specified. 44 Supply & fixing in repair light fittingsdecorative LED lunminare for wall mounting multi colour ABS housing with ploycrabonate rings thermo set plastic/glass lamp holder CITY 1 fitting for lamp 1X Eco tone Crystal/ Décor Model No HLDL03160099 along with 15 watt retro fit CFL/LED Spiral along with lamp complete all as specified and as directed. 45 Supply & fixing in repair regulator electronic switch/socket type 5 steps suitable for 1200/1400 mm sweep 230 volts as per sample complete all as specified and directed. 46 Supply & fixing in repair bell electric (dingdong) 230 volt, SP 47 Supply & fixing in repair Buzzer, AC, 230 Volts, single pole, 48 Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type 49 S & F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type 50 Supply and fix Sheet metal DB,double door,SPN 8 way for MCB, 240 volt with 200 amps rated bus bar, neutral bar / connectors suitable copper thimbles, lugs etc complete all as specified and directed. 51 Supply and fix MCCB 100 Amps 4 pole415 Volt,25 KA breaking capacity complete all as specified and directed. 52 Supply & fixingMCCB 3 pole/4 pole of capacity 63 Amps with breaking capacity 16 Kilo Amps including all electrical connections and fixing arrangment complete all as specified and directed . 53 Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus bars , Neutral links , blanking plates completeall as specified and directed. 54 S/F MCB TPN63Amps 415 volts completeall as specified and directed. 55 Supply and fix MCB DB, TPN 4 way double door with suitable 200 amps rated bus bars , Neutral links , blanking plates all as specified and directed. 56 S&F LED tube rod 20 W in existing tube light fittings incl making necessary connections as required for LED tube all as specified and directed. 57 S & F in repair surface mounted LED Battern with LED tube rod 2 Feet 10W internal surge protection device of 4 KV with voltage band 140-280V and making electrical connection to ceiling rose all as directed. 58 Supply and fix of Microwave Sensor enabled Integral LED 4 ft luminaire with extruded housing and Opal diffuser ith ABS end caps. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification. Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of at least 100 lumen/watt with a maximum system wattage of 20 Watts. Fixture should cover upto 5 mtr sensor radius coverage area with 120 degree angle after 17 to 30 seconds & 30% light output in case of non-occupancy.The electronic driver used shall have a power factor >0.9 and THD <10% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have in house lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameterscomplete all as specified and directed. 59 Supply & fixing of 14 Watt Batten luminaire with Polycarbonate Housing with high quality extruded polycarbonate diffuser.The luminaire should have a CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 and IK02 classification.Luminaire shall be designed to emit at least 2100 nominal lumens and an outstanding System efficacy of at least 150 lumen/watt and maximum system wattage of 14 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <15% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. 60 Supply & fixingof 20 Watt Batten luminaire with Polycarbonate Housing with high quality opal finish diffuser.The luminaire should have a CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 and IK02 classification.Luminaire shall be designed to emit at least 2000 nominal lumens and an System efficacy of at least 100 lumen/watt and maximum system wattage of 20 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. 61 Supply & fixing of Recess LED 2x2luminaire with CRCA powder coated housing suitable with high transmittance opal diffuser for glare free symmetric lightb distribution for general lighting in office areas. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 4000 K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3420 nominal lumens and an outstanding System efficacy of greaterthan 113 lumen/watt and maximum system wattage of 30 Watts.The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% , EMC EMI CISPR 15 complaint, Ripple <5% (Flicker Free), Short-circuit protection, 4KVA Surgeand suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. 62 Supply & fixing of Recess LED 2x2luminaire with CRCA powder coated housing suitable with high transmittance opal diffuser for glare free symmetric lightb distribution for general lighting in office areas. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and an outstanding System efficacy of atleast 120 lumen/watt and maximum system wattage of 30 Watts.The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% , EMC EMI CISPR 15 complaint, Ripple <5% (Flicker Free), Short-circuit protection, 4KVA Surgeand suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. 63 S& F in replacement LED tube set (fitting) 20 Wuse and through type withinternal surge protection device of 4 KV with voltage band 140-280V with LED rod with fixture box type and making electrical connection to ceiling rose all as directed. 64 Supply and fix of hexagon shaped LED bulkhead industrial luminaire with Pressure die cast housing and Polycarbonate diffuser and silicon gasket. The luminaire should have a color CRI > 80, and CCT of 5700K. The luminaire shall be compliant with IP66 & IK 10 classification. Luminaire shall be designed to emit at least 1000 nominal lumens at a system efficacy of at least 100 lumen/watt with a maximum system wattage of 10 Watts. The electronic driver used shall have a power factor >0.95 and THD <15% and suitable for an operating voltage range of 180-270V AC and 4 Kv inbuilt surge protection. Manufacturer shall have in house lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. 65 S & F LED bulb 9 Watt White(6000K-6500 K)/Warm(2700K-3200K) with BEE Energy star rating of three star or more and emission of minimum 100 lm/W complete all as specified 66 S & F LED bulb 12 Watt White(6000K-6500 K)/Warm(2700K-3200K) with BEE Energy star rating of three star or more and emission of minimum 100 lm/W complete all as specified 67 S & F SITC of high-quality integrated LED Street Light with a minimum system lumen of4750 Lm and system wattage not exceeding 45W with a nominal efficiency 105 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters complete all as specified and directed. 68 S & F of SITC of high-quality integrated LED Street Light with a minimum system lumen of 6600 Lm and system wattage not exceeding 60W with a nominal efficiency 110 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. 69 S & F SITC of high-qualityLED Flood Light with a minimum system lumen of 6000 Lm and system wattage not exceeding 50 W with a nominal efficiency 120 lumen/watt. CCT of 5700K with CRI >70. The housing should be of pure polyester powder coated die-cast aluminum with high efficiency LEDs as lighting source. The fitting should have PC reflector for maximum output and PC Lens for symmetric distribution & tempered protective Toughened Glass with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 6 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. 70 S&F SITC of high-quality LED Flood Light with a minimum system lumen of 12000 Lm and system wattage not exceeding 100 W with a nominal efficiency 120 lumen/watt. CCT of 5700K with CRI >70. The housing should be of pure polyester powder coated die-cast aluminum with high efficiency LEDs as lighting source. The fitting should have PC reflector for maximum output and PC Lens for symmetric distribution & tempered protective Toughened Glass with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 6 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. 71 Supply and fixing of new generation, post top, energy saving spun aluminium landscape luminaries with high power 40W suitable for Pole dia76mm 72 M&L for submain wiring with two RUNS of single core 6 sqmm for main wire and one run of single core 4 sqmm as earth wire of stranded copper conductor PVC insulated unsheathed cables drawn through and including concealed in wall and necessary cutting and chasing rigidPVC conduit ISI marked not less than 20 mm dia andall accessories complete all as specified & directed. 73 M&L for submain wiring with two RUNS of single core 4 sqmm for main wire and one run of single core 1.5 sqmm as earth wire of stranded copper conductor PVC insulated unsheathed cables drawn through and including concealed in wall and necessary cutting and chasing rigidPVC conduit ISI marked not less than 20 mm dia andall accessories complete all as specified & directed. 74 Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circulat of size 10 Sqmm 2 Core complete. 75 Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circulat of size 6 Sqmm 2 Core complete. 76 Supply & fixingModular/BLDC regulator electronic switch type 5 steps suitable for 1200/1400 mm sweep 230 volts
