Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-12-2025 |
| 2 | 18-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-11-2025 |
| Sl. No. | Item Description |
| 1 | Note : In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly. |
| 2 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-In-Charge |
| 3 | M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) laid in flooring as specified and directed by Engineer In charge. |
| 4 | M&L Double charged Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 5 | M&L Double charged Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in Skritting /Dados etc. with screed bed or bedding layer 10mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 6 | Taking downcement plaster ofany description from brick wallsurfaces etc including racking out joints and hacking for key, scrubbing down with water and removing the debris out of MOD land etc complete all as directed. |
| 7 | M&L Glazed Ceramic tiles coloured, of size450mmX350mm/300mmX7mm thick approved 1st quality asinvertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles including 10 mm its backing coat in CM (1:4) all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above. |
| 8 | M & L for 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rounding edges,grinding and polishing complete all as specified and as directed. |
| 9 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situationcomplete all as specified and directed. |
| 10 | Taking down Chowkhats or frames withshutters n exc 1.5 sq. meach complete all as specified and as directed |
| 11 | Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed. |
| 12 | Taking down shutters of any description exceeding 1.0 Sqm and not exc 2 sqm each and Refixing at same opening complete all as specified anddirected |
| 13 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed and specified by Engr-in-Charge. |
| 14 | M&L Complete removal of existing treatment on walls complete all as directed. |
| 15 | M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty withwhite or tinted on walls complete all as specified and as directed. |
| 16 | S&F Vitreous China wash hand basin white flat back, along withsize 550x400mm including couplings, waste pipe, connections all fittings complete all as specified and as directed. |
| 17 | S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.Make : Prayag Catpart No - 7314 or equivalent in other make. |
| 18 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in modular bricks in cement mortar 1:6 complete all as specified |
| 19 | S&F 650 x 450 mm bevelled edge mirror of selected quality glass mounted on frame less and fixed to half cut glass clips with chromium plated brass screws and cup washersin repairs complete all as directed by the Engr-in-Charge. |
| 20 | S&F 30mm 2nd class HW thick factory made skeleton shutters, open rebated and preparedto receivegauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as directed. |
| 21 | M&L Machine cut kota stone slab in stairs/ flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as directed. |
| 22 | M&L Kota stone slab 20-25mm thick in skirting, dado and pillar laid over cement screed and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as directed. |
| 23 | S&F Powder coated Aluminium frame for doors,windows/ Louvered and partitions with one or more rebatesincluding cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-charge. |
| 24 | Supply and fix Powder coated Aluminium window shutters, sliding typeThreetrack including frame for fixing glass sections of aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed.Note : Glass will be measured and paid separately under relevant item.complete all as specified and as directed. |
| 25 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and asdirected by the Engineer-in-Charge. |
| 26 | S&F 5.5 mm thick tinted glass of superior quality fixed to aluminium partition and door each pan. |
| 27 | Supply and fix 150 mm size Alluminium,anodised barrel tower boltsof extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 28 | Supply and fix 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 29 | S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge. |
| 30 | Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixedin repairs complete all as directed |
| 31 | S&F 125 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steeldoor frame complete all as specified directed by the Engineer-in-Charge |
| 32 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) and fixed in repairs all as specified and directed. |
| 33 | Cutting holes into or through brick walls built in cement mortaror cement lime mortar Superficial area Exc. 150 sq. cm but n exc 400 sq. cm. and making good in cement mortar 1:3 or cement concrete 1:2:4 typeB-l as requiredcomplete all as specified and directed by engineer in charge. |
| 34 | S&F sinks with drainage board of double tub made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe and all other necessary fittings all as specified and directed. |
| 35 | S&F CP Bibtap 15mm bore for Kitchen sink regular spout with flange of Make: Prayag, Catpart No 6616 or equivalent in other make complete asdirected by the Engr-in-charge. |
| 36 | S&F stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified anddirected. |
| 37 | S & F in500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including dismantling existing old water tankall as specified and directed. |
| 38 | S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed. |
| 39 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed. |
| 40 | M&L for preparing new steel surfaces any decriyion over 10 cm width or girth and two coats of synthetic enamel paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified. |
| 41 | M&L for Preparing New wood and wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and asdirected by the Engineer-in-Charge. |
| 42 | S&F 18/19 mm thickprelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 43 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed. |
| 44 | M&L Rendering 15 mm thick in CM 1:6 onbrick massonry surfaces of walls, finished even and smooth with out using extra cementall as specified and directed. |
| 45 | Excavation in trenches not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth and getting out in hard/dense soil all as specified and as directed. |
| 46 | M&L cement concrete bed in 1:3:6 type C2 (Using 40 mm graded stone aggregate) to drain pipe including packing under and haunching against the sides of the pipe after they are laid and tested for the 150mm bore of pipe. |
| 47 | M&Lreinforced Cement Concrete Pipes NP-3 drain pipes grade \"A\" laid in trenches and jointed with cement mortar200 mm bore of pipeall as specified |
| 48 | Returning,filling in ,including spreading, leveling, watering and well ramming in layers not exc 25 cms thick in soils all as specified and as directed. |
| 49 | Removing excavated material/soils to a distanceexc. 50 mtrs and not exc. 250 mtrs, depositing where directed at a level not exc. 1.5 mtr above the starting point all as specified |
| 50 | M&L Non skid ceramic tiles of 7 to 8 mm thick(square/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,of approved 1st qualityin floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match tiles all asdirected. |
| 51 | M&L Glazed Ceramic tiles coloured, of size450mmX300mm/300mmX7mm thick approved 1st quality asinvertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles all as specified and directed.Note: Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in rate quoted above. |
| 52 | M&L 2 coats of Cement Base Paintover a coat of primer on oldplasteredsurfaces on walls complete all as specified and as directed. |
| 53 | S&F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge. |
| 54 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour Prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed. |
| 55 | M&L Rendering 10 mm thick in CM 1:3 oncelling surface, finished even and smooth with out using extra cementup to ht 6.5 m all as specified and directed. |
| 56 | S&F 35mm of 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge. |
| 57 | Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed. |
| 58 | All same as per itemNo. 56 here-in-before but 20 mm bore. |
| 59 | All same as per item No. 56 here-in-before but 25 mm bore. |
| 60 | S&F 16mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs inc concealed piping after cutting in brick work/stone masonry walls where ever required complete all as specified and directed. |
| 61 | All as per item No. 59 above but 20mm bore. |
| 62 | Supply and fix steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 63 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth |
| 64 | S&FCP Bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed |
| 65 | S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests includingremoving the existing onecomplete and making good all connectionsas in repairs all as specified and directed. |
| 66 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..andSeat and cover for pedestal pan withall as specified and directed. |
| 67 | S & F in repair for vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 68 | Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long withbrass nuts and washers complete all as specified and directed. |
| 69 | S&F brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and asdirected by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent |
| 70 | S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed. Make : Prayag/Parryware or equivalent |
| 71 | S&F brass CP shower rose with arms 75 mm size fixed all as specified and directed. |
| 72 | S&F 15 mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.Make: Prayag/Parryware or equivalent. |
| 73 | S&F Chromium plated (CP)Toilet paper holder of vitreous china fixed to wallsbrass screws complete all as specified and directed |
| 74 | S&F Sheet glass shelf assembly for WHBconsisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long in repairs complete all as specified and directed |
| 75 | S&F 650 x 450 mm bevelled edge mirror of selected quality glass mounted on frame less and fixed to half cut glass clips with chromium plated brass screws and cup washersin repairs complete all as directed by the Engr-in-Charge. |
| 76 | S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed |
| 77 | S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats. and fixed in all as specified and directed. |
| 78 | S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed |
| 79 | S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs all as specified and directed. |
| 80 | S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed. |
| 81 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 82 | S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed. |
| 83 | S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 84 | S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed. |
| 85 | S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed. |
| 86 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. |
| 87 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 88 | M&L 3 coats of white wash over a coat of primer on newly plasteredsurfaces on ceilings complete all as specified and as directed. |
| 89 | S&F 250mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 90 | M&L Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, manholes including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge. |
| 91 | S&FAnodised aluminium frame for doors,windows/ Louvered and partitions with one or more rebatesincluding cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as directed by Engr-in-charge. |
| 92 | M&L Prelaminated particle board 12mm thick, interior grade, prelaminated on both sides side with decorative choice lamination fixed with screws to timber frame work |
| 93 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2nos in each door, hinges, anodised aluminium snap beading screws etc.all as specified and directed. |
| 94 | Excavation in post holes each n.exc 0.50 cum getting out. Returning filling in layers n.exc 25cm etc removal at surplus soil to a distance n.exc 50 mt and making good surface in hard/ dense soil |
| 95 | M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge. |
| 96 | S&F Steel work as in tubular / L post trusses,plates, purlins including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified. |
| 97 | S&F Pre painted galuvalume aluminium zink coating GI based corrugated sheet 0.5mm thick of an colur having tensle strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed. |
| 98 | S&F mild steel work as in Joist, channel, angle, or tee sections, fixed independently of grade Fe 410-W(Gde-E- 250)quality-A, without connecting plates, etc. (cut to ordinary lengths complete all as specified and directed by engineer in charge. |
| 99 | Providing, cement concretetype B-1 (1:2:4) using 20mm graded stone aggregate as in,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 100 | Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises. |
| 101 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by engineer in charge. |
| 102 | M&L TMT steel bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia as in reinforcement. |
| 103 | M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer and chalk whiting with using of all scaffolding,trestles,ladders,cradles which are necessary for execution of work and protective measuresincluding cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all asspecified & directed by the Engr-in-Charge. |
| 104 | Material & labour for Flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe- 290(Gde E 165) Complete all as specified and as directed |
| 105 | Supply ony Chain link of sizeMS galvanised fencing any size or type Complete all as specified and as directed |
| 106 | Fixing onlychain link fencingincluding line wires, any mesh, size and type to any type ofstandard, rails, straining bolts etc., including provision of binding wire Complete all as specified and as directed |
| 107 | Material & labour for Mild steel round bars 10 mm dia and over,cut to length, bent to required shape including cranking, hooking ends and securing with welding with 10 cm overlaping between two bar all as specified and directed by Engineer-in Charge as in in reinforcement. |
| 108 | Supply & fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n exc 10cm long and dia of neck 11 to 15mm Complete all as specified and as directed |
| 109 | Taking down carefully existing unserviceablealuminum/copperpoint wiring (light, fan, socket or power) of any description & in anyposition complete including all fittings& fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etcincluding taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed |
| 110 | M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable in accordance with relevant IS with proper colour coding, 1100 volts grade drawn in ISI marked MMS grade PVC conduit of dia 20mm minimum/ casing capping , 1.2 mm thick minimum, 20mm width minimum with double locking arrangement, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge (i.e. 1.6mm thickness) including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:-NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxesto required depth and core cutting wherever required as directed by the Engineer-in-charge & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces.In case the electrical box needs to be installed on surface, prior approval must be taken from the Engineer-in-charge and surface modular boxes made of FR grade ABS of minimum 1mm thickness with rounded corners need to be used instead of metal flush boxes. |
| 111 | (ii) The decision of casing capping/PVC conduit rests with the Engineer-in-charge.For casing capping, screws of minimum 35x8mm and suitable plugs should be used for fixing. In case of stone walls, wooden gutties shall be grouted in wall for fixing of screws. Distance between 2 screws shall not be more than 600mm. Size of Trunking shall be correct depending on number of wires to be drawn as per SSR Part1 but not less than 20mm.(iii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A\".(iv) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.(v) Insulation resistance test: All wiring shall be tested with 500V Megger between phases, phase – neutral and to Earth. IRvalue shall not be less than 1M-ohm. |
| 112 | One light point controlled by one; one way switch. |
| 113 | One fan/exhaust fan point controlled by one, one way switch |
| 114 | One 3 pin socket out let 5 amp point on the (same board) with other switches. |
| 115 | One 3 pin socket outlet 5 amp point on the independent board |
| 116 | Two light points controlled by one; one way switch. |
| 117 | Three light points controlled by one; one way switch. |
| 118 | Four light points controlled by one; one way switch. |
| 119 | All as per item No. 110 here-in-before butwith 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board. |
| 120 | All as per item No. 110 here-in-before butwith 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 15A Sockets/ earth plug socket for ACs and geysers |
| 121 | S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specifiedanddirected. |
| 122 | Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 123 | Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 124 | Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 125 | Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 126 | Supply and fix modular fan regulator 100 W 2 module, socket type and capacitive type all as specified and directed by Accepting officer |
| 127 | S & F 4ft 20W LED batten tubelightsurface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 all as specifiedanddirected. Model: Crompton Linea Pro or similar |
| 128 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed. |
| 129 | Taking down distribution boards / main switches of any type, size and capacity including making good the disturbed surface to match the existing surface complete all as specified and directed by Engr-in-charge |
| 130 | Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge |
| 131 | Supply and fix distribution board double door type VTPN 4 waysheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge. |
| 132 | S & Fsheet metal enclosure powder painted forMCB DB SPN08 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and directed by Engr-in-charge. |
| 133 | S & Fsheet metal enclosure powder painted forMCB DB SPN04 way double door with IP-42 protectionwith Din rail and busbar complete all as specified and directed by Engr-in-charge. |
| 134 | Supply and fixingMCCB 25-100 Amp Three pole 415 Volt , breaking capacity, 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge. |
| 135 | Supply and fixing concealed meter box with isolator made from minimum 0.7mm thick CRCA sheet, to accommodate 1No. Single phase energy meter complete all as specified and directed. |
| 136 | Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed. |
| 137 | S&F MCB single pole, 6 to 32 Ampsin `C’ series having current rating 10 KA complete all as specified and directed. |
| 138 | Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed. |
| 139 | M/L for Sub main wiring with 2 runs of PVC insulated unsheathedmulti stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessories with 4 sqmm PVC insulatedearth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiringand connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length. |
| 140 | M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle completeall as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’ |
| 141 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge |
| 142 | Disconnecting and removingceiling fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position includingminor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed. |
| 143 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms at the time of supply with brushless direct current motor (BLDC) including necessary mounting arrangement as double bolted fan hooks complete all as specified and directed by the Engineer-in-charge |
| 144 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed by the Engineer-in-charge |
| 145 | Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers including taking down the existing exhaust fan and depositing to MES E/M store complete all as specified and directed by the Engineer-in-cahrge |
| 146 | Cutting chases, pinning in, makinggood to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealing the LT XLPE cable not exceeding 25 sqmm size and making good, cutting exceeding 20cm girth complete all as specified and directed by Engr-in-charge. |
| 147 | M&L for cutting holes suitable for fixing of exhaust fan of any size and shape into through stone/brick walls built in cement mortar or cement lime mortar and making good in cementmortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge. |
| 148 | Supply 12\" gold life smart down rod (Anti suicide fan rod) MS pipe zinc plated, 19mm OD, 1.8+/- 0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf + and spring hidden in pipe will expand to about 1 mtr or more, powder coated white colour for ceiling fans of any size with all accessories complete all as specified and directed by Engineer-in-Charge. |
| 149 | Supply and lay GIpipe light grade laid in trenches for cable protection of 40mm size complete all as specified and directed by Engr-in-chagre. |
| 150 | Supply and fixing LED building security light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge |
| 151 | Disconnecting and removing exhaust fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughlyprovision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed. |
| 152 | S & F in replacement of louvers with suitable frame work and fixing arrangements forexhaust fan of any size sweep complete including removing the existing unserviceable one complete all as specified and as directed. |
| 153 | Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10sqmm 4 core complete all as specified and directed |
| 154 | Supply and laying FRP powder coated cable tray with cover, perforated type, 100mm, sheet thickness minimum 4mm including coupler plates, elbows, tees, reducers, bolts, nuts, washers and other accessories conforming to NEMA/ASTM/BIS standards complete all as specified and directed by the Engineer in charge |
| 155 | Supply and laying Non-metallic PVC conduit MMS grade conforming to IS 9537:latest, FRLS, dia 20mm including all accessories and hardware complete all as specified and directed by the Engineer-in-charge.Note: Cost of cutting chases shall be measured and paid separately under relevant item of this schedule. |
| 156 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 toends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by the Engineer-in-charge |
| 157 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers all as specified and directed |
| 158 | S&F exhaust fan of sweep 150mm, plastic body , power consumption not to exceed 25watt, AC single phase 230V, 50Hz, copper winding complete all as specified and directed |
| 159 | S & Fearth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 voltswith and including one MCB, SP, 20A, 240 Volts as per all as specified and directed. |
| 160 | Supply and fix distribution board double door type VTPN 6 waysheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge. |
| 161 | M &L for Sub main wiring with 4 runs of PVC insulated unsheathedmulti stranded single core copper conducter 10 Sqmm drawn through PVC conduit/casing capping including accessaries with 10 sqmm PVC insulatedearth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiringand connecting up ,all as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length. |
| 162 | Supply and fixing MCCB 125 Amp three pole 415 Volt , breaking capacity 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge. |
| 163 | S&F Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32A complete all as specified and directed. |
| 164 | S&F Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 40A complete all as specified and directed. |
| 165 | S&F Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 63A complete all as specified and directed. |
| 166 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by the Engineer-in-charge |
| 167 | Labour charges for taking down of switchboard and refixing in the place as directed by the Engineer-in-charge including cutting the surface of brick/stone wall to insert the switchboard, any PVC conduit required along with accessories and making good the disturbed surface to match the existing surface complete |
| 168 | Supply and fixing of highbay LED lights,150 Watts with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W including clamping the light to the existing metal fixtures ofhangar complete all as specified and directed by the Engineer-in-charge. Model No. Havells GAZELLAHBV2P150WLED857PBOTGGRY or equivalentof Bajaj / Crompton make. |
| 169 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty 2core cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections, laying in PVC conduit or in existing busbar including clamping the conductor to existing steel work complete icluding taking down the existing wiring and depositing to E/M store complete all as specified and directed by Engr-in-charge |
| 170 | Material and labour for Disconnecting of recess type 2x2ft LED light fittings and refixing the same after necessary ceiling work and depositing the remainin glights to MES E/M store complete all as specified and directed by Engr-in-charge. |
| 171 | Dismantling/cutting of wall and ceiling boards (fibre, pulp, insulation etc) or insulationboards. Slabs, blankets, any thickness , including cover fillets complete all as specified and directed by the Engineer-in-charge |
| 172 | M&L providing and fixing 10mm thick plaster of paris ceiling (Gypsum Anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and directed by the Engineer-in-charge |
| 173 | S&F modular metal flush box 16 module including taking down the existing and depositing to E/M store and any civil work required to make good the disturbed surface complete all as specified and directed by Engr-in-charge. |
| 174 | Supply and fixing of modular cover plate white with frame complete for16 module complete all as specified and directed by Engr-in-charge. |
| 175 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm on existing window including necessary civil work complete all as specified and directed by the Engineer-in-charge |
| 176 | S&F 2 AC PLC CONTROLLER PREMIUM MODEL FULLY ADVANCED LCD MESSAGING DIGITAL DISPLAY HEAVY DUTY MODEL TT2-2018 incl control wiring and all connected accessories complete all as specified and directed. |
| 177 | M&L for Maintenance free earthing all as per following specificationand as directed by Engineer-in-charge:- a) Copper bonded MS rod with Low carbon steel, high tensile strength ,min 250 microns of copper plating, UL listed, Diameter- 17.2 mm, Length- 3 meters,Approvals- Tested acc. IEC / EN 62561-2, UL 467.Make: Marconite/ DEHN/JEF TECHNO(b) 20 kg backfilled compound, - Material Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μm), lightning long duration test at- 100C No fulgurites/Pass, Environmentally Friendly ROHS certified, Resistivity- < 0.12 ΩM, Complying Standard- IEC 62561-7 , Testing Approvals Certified from- NABL accredited Laboratories.(c) SS 316 grade Termination clamp to terminate the load on earth electrode for termination, Material of construction - 316 grade stainless steel, Dimension - 160x35x3 mm |
| 178 | Note : a) Quoted rate includes testing of earthings and earth results should be less than 1 Ohm. The contractor will be responsible to submit the result sheets to the department along with the locations.b) The GI strip shall be measured and paid separately under relevant item of this BoQ.The electrode and GI strip shall be welded using exothermic welding.c) The quoted rate is deemed to include boring, all necessary earth work, excavation, refilling and making good the excavated surface.d) The contractor shall have to give written guarantee for maintaining earth resistance of less than 1 Ohm for a period of 5 (Five) years after certified date of completion and shall deposit Rs.2200/- per earthing pit as security deposit for a period of 5(Five) years. e) Alll necessary test certificates and OEM certificate andmust be submitted within 15days of acceptance . |
| 179 | M&L for Earth continuity Hot dip GI strip 32X6 mm with saddles and fixing screws etc fixed to wall on batten/porcelain insulatoror recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing including breazing at each necesasry joints etc. |
| 180 | S&F of 10 inch heavy duty pit cover, Product Code- HEP, Dimensions- 308 mm (L) x 308 mm (W) X 214 mm (H), Weight 2.5 kg (5.50 LBS) complete all as directed |
| 181 | Material and Labour for earthing pit display boards made out of 3mm thick MS sheet of size 30 x 35cm welded to 75cm long 25 x 25 x 5 mm thick MS angle iron grouted in PCC 1:3:6 (with 20mm stone aggregate) to a depth of 20 cm and applying two coats of synthetic enamel paint of approved color over a coat of red oxide primer and writing the letters on plate for showing the following details:1. EARTHING PIT NO:2. DATE OF MEASUREMENT :3. NEXT DUE DATE:4. STANDARD VALUE: 5. VALUE OBTAINED: 6. MEASURED BY: 7. SUPERVISED BY: Note : Shape, size and colour of display board should be approved by Engr in Charge before fixing at site. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
