Tender For Provision Of Modular Kitchen In Certain Officers Married Accommodation.; 1 Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) completeall as specified and directed. 2 M&L coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) areaof each tiles exceeding 0.06 Sqmbut not exceeding 0.11Sqm in floors etc , set and jointed in neat cement slurry and pointed in whiteor coloured cement to match over/ incl 15mm thick screed bed (1:6),completeall as specified and directed. 3 M&L, Glazed ceramic tiles coloured of size 450X 300X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or colouredcementincluding 15mm thick backing coat in CM 1:4, complete all as specified. 4 Taking down shutters of any description exc 1 sqm and not exc 2sqm each and refixing in the same opening after easing and adjusting. 5 Taking up or down 15mm bore steel tubing and connections, complete all as specified and directed 6 S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittingsconcealed on walls/ceiling or laying in floors including fixing of pipes in wall with clampscomplete all as specified. 7 S&F as in repairs 15mm fancy type chromium platedBib taps,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 8 S&F stop valve /angle valve fancy type chromium platedscrewed down, high presure with butterfly handle screwed both ends for pipeand fixed to pipe of15mm dia bore complete all as specified and as directed. 9 Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified. 10 M&L for 18-20 mm thick jet black Granite slab (of any type and colour as approved by GE) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms overincluding bedding layer of 20mm thickin cement mortar (1:4) for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 11 M&L for providing edge moulding to 18-20mm thick Granite stone of any description of counters, cooking platform, windows etc including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. 12 M&L for machine cut cudappah stone slab 20-25mmthick over cement screed base/ vertically fixed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 13 Dismantling boarding any description fixedin any position with screws. 14 M&L for Providing & Fixing Kitchen in Combination of 0.5mm (Body panels) and 1.2mm thick (Horizontal stiffener & leg channels) Galvanized sheet as per IS277 with Laminate of 0.8mm thick. Edge bending of 2mm thick. Steel Cabinets with color specific Laminate of 1mm thick from both sides. laminate Shutters with Approved shade. Design & material finalization and confirmation should be done by executive engineer for both Base as well as top units, Plain Drawers with Soft Closing. Trolleys of S.S. Rod. 5 mm thick 304 Grade Steel.Handles (For floor unit 96 mm pitch Extrusion Aluminum handle in dune black finish & for wall unit Round Knob aluminum handle in dune black finish)Hinges (Hettich onsys soft closing Nickel Plated for all unit. Blind corner Hinge- 3D-Soft close Nickel Plated EBCO make for corner unit). With 95 Degree Soft Closing. Brushed Aluminum Skirting Rehau Cabinet Legs (EBCO Length 100mm black finish with Height adjustment screw with Adjustable height) Hardware and Screws made of Stainless Steel. Vendors should have their own manufacturing units with all the necessary certificates along with quality documents Material compliant of IGBC & ISO Certificates.ISO 14001:2015 / ISO 9001:2015 / ISO 45001:2018 / ISO 50001:2018. 15 S&F 18/19 mm thick Block boards, grade 2 quality, interior grade, with decorative face veneer on both side with decorative choice lamination in wardrobes, cupboards shelves, partitions etc as approved by GEfixed with screws to timber frame workincluding 6mm thick teak wood beading all around complete all as specified and directed. 16 S&F in repair 150mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed. 17 S&F in repair plastic body Magnetic catcher with iron plate to be fixed with shutters of kitchen cabinetapproved pattern and shape fixed with screws on wooden/ plywood surfaces all as specified and directed. 18 S&F in repair 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws 19 Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified. 20 M&L for Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, complete all as specified. 21 M&L for preparation of newlyplastered surfaces of wall and applying two coats of oil bound distemper over a coatprimer on 3 mm thick wall care putty all as specified and directed. 22 Material & Labour for preparing old plastered / decorated surface of ceiling including putty filling etc by brooming down and applying one coat of oil bound distemper withsmooth roller finish ,complete all as specified and directed by Engineer in Charge. 23 M&Lfor preparation of old plastered surface of wall and applying Two coats of oil emuslion distemper, all as specified and directed. 24 Taking down copper/ aluminium point wiring (light, fan, socket or power)complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition sepertately) and making good disturbed surfaces of walls, floors etc. (Note: Serviceable tube lights etc shall be kept under safe custody and refixed as directed.) 25 Material & Labour for point wiring conforming to IS-732:1989 complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheated copper conductor, 1100 volts grade conforming to IS-694:1990 drawn through and including PVC non-metallic concealed conduit ISI marked with accessories concealed in wall/floor including cutting chases, pining etc with modular metallic ISI marked terminal boxes, concealed in wall (PVC casing caping of suitable size shall be used where ever concealing is not possible) including one FRLS PVC insulated and sheathed multistanded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following :- Note:- (i) PVC Casing caping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/ beam/ column/ ceiling etc.) The same shall be deemed to included in the quoted rate. No extra cost shall be paid for the PVC casing caping item.(ii) Separate circuit shall be drawn from MCB. No taping from light circuit.(iii) Modular metal flush box shall be paid separately under relevant items of this schedule. 26 (a) One light point controlled by one switch SP one way. 27 (c)One exhaust fan point controlled with one 6A switch 28 (d)One 3 pin socket outlet 6 Amps on independant board. 29 (e)One 3 pin socket outlet 6 Amps on same board with other switches. 30 (g)One bell pontcontrolled by one bell push 6 amps independent board. 31 All as per item No. 25 here in before point wiring but for 15 amps socket complete with 2.5 sqmm single core multi stranded FRLS PVC insulated sheated copper conductor 1100 volts grade drawn through and including PVC non - metallic concealed conduit including one FRLS PVC insulated and sheathed multi stranded green colour copper conductor 2.5 sqmmas earth continuity conductor connected to comon earth as earth dolly. Note:- (i) PVC Casing caping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/ beam/ column/ ceiling etc.) The same shall be deemed to included in the quoted rate. No extra cost shall be paid for the PVC casing caping item.(ii) Separate circuit shall be drawn from MCB. No taping from light circuit.(iii) Modular metal flush box shall be paid separately under relevant items of this schedule. 32 Supply & Fixing modular switch, 6 Amps , One way, one module , ISI marked complete all as specified and directed.Make:- As mentioned in Particular Specifications. 33 Supply & Fixing modular type bell push 6 amps 1 module, ISI marked complete all as specified and directed. Make:- As mentioned in Particular Specifications. 34 Supply & Fixing modular switch, 16 Amps , One way, one module , ISI marked complete all as specified and directed.Make:- As mentioned in Particular Specifications. 35 Supply & Fixing bell electric AC 230 Volts single pole ding dong with ISI markedcomplete all as specified and directed.Make:- As mentioned in Particular Specifications. 36 Supply & Fixing modular socket, 6 Amps, 3 pin, two module, ISI marked complete all as specified and directed.Make:- As mentioned in Particular Specifications. 37 Supply & Fixing modular socket, 16 Amps , 3 pin combined , two module , ISI marked complete all as specified and directed.Make:- As mentioned in Particular Specifications. 38 Supply & Fixing ceiling rose surface bakelite with ISI mark, three terminals complete all as specified anddirected. 39 Supply & Fixing Modular white cover plate with Frame 3 Module, ISI marked complete all as specified anddirected. Make:- As mentioned in Particular Specifications. 40 Supply & Fixing Modular white cover plate with Frame 8 Module, ISI marked complete all as specified and directed. Make:- As mentioned in Particular Specifications. 41 Supply & Fixing Modular metal flush box 3 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed. Make:- As mentioned in Particular Specifications. 42 Supply & Fixing Modular metal flush box 8 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.Make:- As mentioned in Particular Specifications. 43 Supply & Fixing integrated LED batten 20 Watt, 4 feet long, full white in Engineering plastic battern with white acrylic cover with built in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. 44 Supply & Fixing in Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as directed by the Engineer-in-charge. 45 Supply & Fixing Retrofit LED lamp 12 Watts complete all as specified and directed by Engineer-in-Charge. 46 Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces. 47 Supply & Fixing submain wiring with proper colour coding, 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 sqmm in and including PVC concealed conduit of suitable size not less than 25 mm, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm(green colour) for earthing. (For AC & Geyser Points)Note: -(i) 2 runs of 4 Sqmm cable, 1 run of PVC Conduit and 1 run of 4 Sqmm cable shall be measured as 1 Run. (ii) Each Submain Wiring shall run in separate PVC Conduit. (iii) PVC casing caping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/ beam column/ ceiling etc.) The same shall be deemed to include in the quoted rate. No extra cost shall be paid for the PVC casing caping item. 48 S&F,installation, Testing , commissioning of single phase auto clean curved glass electric chimeny with inverter technology, BLDC motor, 150 W, LED lighting, touch control with motion sensor filterless technology and suction power 1400m3/hrs includingaluminum exhaust pipe up to 10 mtr length and making hole in wall and fix 150 mm PVC pipe in hole for exhaust pipe complete all as specified and directed.Make:- As mentioned in Particular Specifications.
