Tender For Supply Of Hpsv Lighting Items/Accessories At 132 Kv Gss Rvpnl Puranaghat, jaipur-Rajasthan

Tender For Supply Of Hpsv Lighting Items/Accessories At 132 Kv Gss Rvpnl Puranaghat E201340 P & F Normal/High output High pressure sodium vapour tubler type 0 201343 250 W,33200 Lumen (Group-1) (Wipro, Philips, Havelts Bajaj, CG) 18.1 Providing & fixing of IK08 IP65 protected Top/Bottom mounted LED Post top Luminarie made of single piece construction powder coated die cast alluminium housing with UV stabalized Clear/frosted Porycarbonate diffuser and Aluminium anodised with sand blast reflector. The System level Luminous efficacy 100 Lumen/W. SMD LEDs is to be used, System CRI>70, cer: 3000/4000/6500 K The integral electronic driver must be potted has a unique BIS R number must be potted has a unique BIS Roumber constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency >85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained. Driver current <750mA Fixture must be in compliance with BIS Standards and Trade mack Certificate complete in all respect. OEM Must have its own in house NABL fab setup for all testing facilities for LED fixtures, (LM79/1M80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre-approved by Engineer in charge. For additional technical parameters of products/ work, refir Annexure A attached with this BSR. 18.10.1 Minimum lumen output 2500 1m Post top Luminarie 3 E203800 P&F of thermoplastic/pve cable junction boxes (United/HPL make) of following sizes including clamps for holding the box, cost of DIN rail for MCB mounting, connectors fior cables terminals, threaded cable glands made of polyamide material etc. complete in 175mmx150mm x100mm 203801 Providing & Fixing of 240/415 VAC MCB with positive isolation of 10 kA breaking capacity (B/C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked 18 8828(1996)/conforming to IEC 60898-1 2002, IEC 609472, low watt losses, trip free mechanisum, energy limiting of clans 3 as per IEC, minimum phase termination capacity 35sq.mm., conductor line load reversibility IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 uptis 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submitted NABL/CPR)/ERDA accrediated lab type test reports & All as per pre-approved by Engineer in charge. For additional technical parameters of product/work refer Annexure A Single ole MCB (With B/C curve tri in Characteristics) 6400 32 Double ole MCB (With B/C curve tri Four pole MCB (With B/C curve tri ping Characteristics) 50/63 A P&F Capacitors for power factor improvement in existing HPSV/HPMV/Metal halide lamp fixture as required. 43 mild P&F Electronic ignitor suitable for HPSV/Metal halide lamp up to 30.0 Mtr. distance as required. P& F vacuum pressure impregnated copper ballast suitable for HPMV/HPSV/Metal halide lamp luminaire as required. 250 Watt

Refer document

Refer document