Tender For“Proposed Furnishing Work Of Interiors Of Narsampet, Warangal Region”, Hanamkonda-Telangana

Tender For“Proposed Furnishing Work Of Interiors Of Narsampet, Warangal Region” COUNTER WITH SIDE TABLE Size: - 5-0 X 2-6 Side Table Size: - 2-6 X 1-6 Providing & Fixing officer table & side table made of Phenol bonded, water proof (BWP) 18mm thk Commercial ply IS303 framework & necessary 2 X 2 & 2 X 1 1/2 SalWood supports & bedding patti as required. The height of the table including side table shall be 2-6. Depth of the table shall be 2-6 & side table shall be 1-6. The counter top to have a 12mmthk PLAIN glass partition of 18 height, positioned 6 from Customer side of the Table Top. The top of glass to be straight cut and to have cut-out for transactions with Garware Film (Ice Dot) (Basic Cost Of Film Rs.36/- Per sft) fixed (at one inch from cut-out edge) as a border to semi-circular cut-out and top. The table shall have one drawer for key board at the corner of the table & side table. The 1-6 wide side-unit to have two drawers and one shutter below the drawers at the side of the table. The front apron shall be made of Phenol bonded, water proof (BWP) 12mm thluding all interconnections & accessories etc g to ceiling section with 25mm drywait at 230mm centers. Screw fixing is done mechanically either with screwdriver of drilling machine with suitable attachment. The boards are to be jointed and finished so as to have a flush look, which includes filling with CRACK SEAL / tape & finishing the tapered & square edges of theboards with jointing compound, paper tape & two coats of primer suitable for Gypboard. Rate includes provision for recessed/dropped portion in the ceiling with necessary provision for concealed optical fibre lighting as per design specified by architect Note: - For light fittings, grills diffusers and cut-outs, speakers, fire detectors etc. have to be made with the frame of perimeter channels of size 20 X 27 X 30mm X0.545mm thick, supported suitably as per direction of Architect, Electric or A.C. Consultants & shown as per detail drawing without additional payments. Entire false ceiling shall be finish with 3 coats of ICI. Plastic Emulsion paint with necessary scraping, patti, levelling & smooth finish with scaffolding, cleaning etc. Note:- Area of the False Ceiling will be measured in plan i.e. wall to wall. Note: - Existing false ceiling should be removed without any extra charge by the Contractor and carefully stacked as directed / taken out from site.Foot Rest with Rubber Matting, Brass Powder Coated Wire Manager, Twin Telescopic Drawer Fittings, Locks, CPU metal stand with casters, necessary teak wood round 2 Moulding etc. complete as per instruction of the Architect.

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB