Tender For Repair And Cleaning Of Well Near House No. C 17/1 Under Ward No. 61 Jagatganj. - Dewatering From Well By Diesel Or Electric Pump Including Hire Of Pump, Fuel, Generator, Operater Etc. With All Comp. 3 Cleaning Of Silt/Malba From Well With The, varanasi-Uttar Pradesh
Tender Notice
51976375
Tender For Repair And Cleaning Of Well Near House No. C 17/1 Under Ward No. 61 Jagatganj. - Dewatering From Well By Diesel Or Electric Pump Including Hire Of Pump, Fuel, Generator, Operater Etc. With All Comp. 3 Cleaning Of Silt/Malba From Well With The
Tender For Repair And Cleaning Of Well Near House No. C 17/1 Under Ward No. 61 Jagatganj. - Dewatering from well by diesel or electric pump including hire of pump, fuel, generator, operater etc. with all comp. 3 Cleaning of silt/malba from well with the help of rope, bucket & labour etc. with all comp. 4 Providing & spreading of bury lime into well with all comp. 5 Disposal of silt/malba from site upto 08km with all comp. 6 E/Win cutting and cartage up to 8 km with all com work. 7 P/L of C.C. in 1:2:4 with 20mm gauge approved stone ballast and C-sand etc. with all comp. 8 B/W in 1:4 C.S. mortar etc, with all comp. (Rate Tendar-I.N.1.10) 9 12mm th. plaster in 1:3 C.S. mortar with cement & f-sand approved etc. with all comp. (Rate Tendar-1.N.1.32) 10 Finishing walls with two coat of the water proofing cement paint of approved quality etc. with all complete. 11 Wall painting with plastic emulsion paint of approved brand and quality etc. with all comp. 12 M.S. or iron work in heavy sizes for jaal on well with all comp. (Rate Tendar-I.N.1.) 13 P/F of corrugated G.S. sheet roofing incl. vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumin and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required Imm thick with zinc coating not less than 275gm/m². DSR No.- 12.1.2 (1257.55x0.735-923.89) 14 P/F of inaurgation board with writing incl. all comp.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
