Tender For Provision Of Security Gate Along With Approach Road For Eoe Officers Enclave Under Ge (North) Bangalore; 1 M&L forPlain cement concrete(1:4:8)type D-2using 40mm graded stone aggregate as in 100 mm thick sub base forpath etc complete all as specified and as directed 2 M&L forPCC(1:3:6)type C-1using 20 mm graded stone aggregates as in 75 mm thick plinth protection etc, finished even and smooth without using extra cementincluding joints filling with sealing compound Grade A complete all as specified and directed. 3 M & L forGranite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls,window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over &includingscreed bed 15 mm thick cement mortar (1:6)etc complete all as specified and as directed 4 M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed 5 Excavationin trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting outin hard/dence soilcomplete all as specified and directed. 6 M & L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified and directed. 7 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. 8 M & Lfor pre-cast cement concrete (1:3:6)type C-1 using 20mm graded stone aggregate as in solid block masonryexc 10cm in width and setting in CM(1:4) complete all as specified and directed. 9 Returning,filling including, spreading, levelling , watering and well ramming inlayers not exceeding 25 cm in any type of soil complete all as specified and directed 10 Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed. 11 Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 cm deep and getting out in hard/dense soilall as specified and directed. 12 Surface excavation n.exc (not exceeding) 30cm deep and averaging 21 cm deep and getting out in hard/dense soilall as specified and directed. 13 M&L for Hardcore of guage not exc 63mm, broken stone or boulders, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surfaceall as specified and directed. 14 M & L for factory made chamfered edge cement concrete paver block 60mm thick of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern, over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand completeall as specified and directed. 15 M & L for factory made chamfered edge cement concrete paver block 80mm thick of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould,laid in required colour & pattern, over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand completeall as specified and directed. 16 M&L for Plain cement concrete (1:2:4)type B-1 using 20 mm graded stone aggregate for coping includingnecessary form workcomplete all as specified and as directed 17 M&L forchequered cement concrete tiles 300 x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment over and including Screed bedding layer 20mm thick cement mortar (1:4)in flooringcomplete all as specified and as directed . 18 M & L forat or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed . 19 M&Lfor preparing new concrete surface (Kerb Stone) and applying two coat of synthetic enamel paintover a coat of self primer etc complete all as specified andas directed 20 M&L for Pre-cast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in solidblock masonry, exc 10cm in width and setting in cement mortar (1:6) complete all as specified andas directed 21 M&L for rendering 15mm thick cement mortar (1:6) on other thanfair faces of brick workor concrete surfacefinished even and smooth without using extra cement complete all as specified and directed 22 M&L for preparation ofnew plastered surface of wall and applying three coat of white wash etc complete all as specified and as directed 23 M&L for PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 24 Removal of excavated soil to a distanceexc. 1.50 KM but n exc. 5KM and depositing where directed complete all as specified and directed. 25 M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete for drains complete all as specified & directed. 26 M&L for Pre-cast cement concrete (1:3:6) type C-1using 20mm graded stone aggregate as in solid block masonry, exc 10cm in width and setting in CM(1:4) complete all as specified & directed. 27 M&L for rendering 10 mm thick CM (1:4) on fair faces of brick work or concrete surfacefinished even and smooth without using extra cement etc complete all as specified and as directed 28 M&L for PCC(1:2:4) type B-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed. 29 M & L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe.290.Gde-E-165 complete all as specified and directed 30 M & L for preparation of new steel or iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and as directed. 31 M&L forReinforced concrete pipes 300mm dia bore, class NP2, laid and jointed complete with collars completes all as specified & directed. 32 M & L forPCC (1:4:8)type D-2 using 40 mm graded stone aggregateas inbed to drain pipes 300mm dia boreincluding packing under and completely surrounding pipes with concrete after they are laid and tested all as specified and as directed 33 M & L for RCC(1:2:4)type B1 using 20mm graded stone aggregate, nominal mix, in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; complete all as specified and directed. 34 M & L for RCC(1:2:4)type B1 using 20mm graded stone aggregate, nominal mix, inColumns,pillars,piers,posts and struts complete all as specified and directed. 35 M & L for RCC(1:2:4)type B1 using 20mm graded stone aggregate, nominal mix, inBeams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and directed. 36 M & L forFormwork to sides of pillars, posts, struts, piers,columns and stanchions for Square,rectangular on plan or polygonal for finished fair square or rectangular surfaces all as specified and directed. 37 M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for finished fair flat surfaces complete all as specified and directed. 38 M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for finished fairflat surfaces complete all as specified and directed. 39 M & L for Formwork to edges of concrete flats, treads, breaks in floors, copings,window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide for finished fair and flat surfacescomplete all as specified and directed. 40 M&L for TMT bars 5 mm dia and over upto 10mm as in stirrups, spacers,binderscut to length, bent to shape required, including cranking,and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed 41 M & L for Providing edge moulding to 18-20mm thick granite stone any description of counters vanitiesetc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed 42 M&L for preparing new plastered surface of wall and applying two coat of cement base paint over a priming coat of white wash etc complete all as specified and as directed 43 M&L for Earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long fixed by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast slab 40mm thick in reinforced cement concrete (1:2:4) type B1 with 8 mmTMTbars reinforced at 10 cm centre to centre both ways, funnel withG I medium grade watering pipe, G I protection pipe, wire mesh and lugs,test point complete all as specified and as directed. 44 M & L for sand cushioning with a layer of river sand 23 cm thick under and above the cable all as sper para 19.75 of SSR Part-I complete all as specified and as directed 45 S&L sub class B burnt bricks for cable protection all as sper para 19.75 of SSR Part-Icomplete as specified as directed 46 Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed. 47 Supply & Layingin repair XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm, 4 core laid in trenches/wall complete all as specified and as directed. 48 S&F in repair G I tubing light grade 32 mm bore with all fitting laid in trenches/walls/Roads for cable protection complete all as specified and as directed.. 49 M&L for Plain cement concrete (1:3:6)type C-1 using 20 mm graded stone aggregate for coping includingnecessary form workcomplete all as specified and as directed 50 Supply and errection Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified,type 410 SP-31 (9 metres long)all as specified and as directed. 51 Supply & LayingGalvanised iron steel tube 40 mm dia bore pipe, light grade, with all fittings fixed complete on walls, poles, laid under floors or in trenches as cable protection works (including necessary clamps, bolts, nuts, etc.,) as specified & directed. 52 S&F in repairLED street light fittings 72 Watts capacity, epoxy powder coated pressure die cast aluminium housing with weather proof gasket for LEDs and control gear compartments, heat resistant toughened clear glass fixed with S S screws, built in 5kV surge protection in driver equipped with10kV external surge protection,access to driver from top, IP-66 protection etcas specified & directed. 53 S&F in replacementPost top LED light fitting 70 Watt capacity, die cast aluminum graphite grey powder coated spigot, Acrylic clear diffuser, spun aluminum power coated canopy, LED connected in series and paralled combination either better heat dissipation arrangement, LED colour 3000 K + 300K, open and short circuit protection, voltage surge protection 5KV, suitable for 60mm OD pipe entry with fixing bolts, IP-65as specified & directed. 54 Labour & machines for trenchless boringunder road, pavement, hard standing by trenchless method 0.4 mpa working pressure, using ultra sounding technique and necessary machine for & including HDPEpipe of 63 mm dia bore complete all as directed 55 Supply and fixing in repairFRPmouldedjunction boxwith IP 65 protection of size 300x200x80mm with 32 Amp 4 way heavy duty terminal block with 6 Amp MCBSP and two number of cable entry gland of standard size with suitable GI strip to fix with pole complete all as directed 56 Supply and fix in replacement Timeline distribution board 32 Amps3 pole / 230Voltsanalog time switch includingaccessories relay contactor, timeretc,all as specified and as directed. (Note : Indoasian Cat No. TL032AB0 or equivalent make specified in P S herein after)
