Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-11-2025 |
| 2 | 13-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-11-2025 |
| Sl. No. | Item Description |
| 1 | B/R WORKDismantlingboarding of any description, fixed in position with nails complete all as specified and as directed by Engineer-in-Charge. |
| 2 | S&in repair Bib taps,CP,fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincluding cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and as directed by Engineer-in-Charge. |
| 4 | S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSRcomplete all as specified and as directed by Engineer-in-Charge. |
| 5 | S&Ffactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in the door at site as per specification:-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm -3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leafNote :-The cost of SS butt hinges, SS tower bolt and SS handlesshall be deemed to be inclusive in the unit quoted rates. |
| 6 | Taking down shutters of any description exc 1sqm but not exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge. |
| 7 | S&F factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters and complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in door at site as per specification:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm -4 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm- 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stopper- 1 No per leaf Note :-The cost of SS butt hinges, SS tower bolt, SS handles sliding door bolt/Aldrop anddoor stopper shall be deemed to be inclusive in the unit quoted rates. |
| 8 | S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40 mm) complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in door at site as per specification :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm -3 nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bol t / Aldrop 16x3000mm- 1 nos per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 nos per leaf Note :-The cost of SS 304 grade wire cloth, SS butt hinges, SS tower bolt, SS handles, SS Sliding Door Bolt/Aldrop and SS Door Stopper shall be deemed to be inclusive in the unit quoted rates. |
| 9 | S&F in repair stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supply and fixing in repair stainless soap disc CP fixed in position complete fixed as in repair in all respect complete all as specified and as directed by Engineer-in-Charge. Make - Cat No F5013116CH or equivalent make : Jaqar/Hindware/cera/prayag as approved AGE(I). |
| 11 | M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applyingtwo coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface complete all as specified and as directed by the Engineer-in-Charge. |
| 12 | Taking down aluminium door/ windows including frames and complete fittings of area exc 1.00 sqm but n. exc 4 sqm complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and including mortice lock with duplicate keys etc complete all as specified and as directed by the Engineer-in-Charge and also including following items supply and fixing in door at site as per specification :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -3 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leafNote :-The cost of SS butt hinges, SS tower bolt and SS handles shall be deemed to be inclusive in the unit quoted rates. |
| 14 | S&F providing powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm, with and including 4mm thick tinted sheet glass selected quality fixed in 2 shutters and stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm in one shutter and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size and also including powder coated 150mm handle with built in locking system for each leaf complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Demolition and breaking up drain PVC (SWR) pipes single socketed in any length with rubber joints complete all as specified and as directed by Engineer-in-Charge. |
| 16 | S&F in repair Door closer hydraulically regulated designation No 3 universal type suitable for door shutter 851mm to 1000mm vide and weight between 61 to 80 kg of aluminium (extruded section body) complete all as specified and directed . |
| 17 | S&F in repair 300mm, mild steel, ordinary rat tailrod pattern springs including roller and roller plate, bearing ISI markcomplete including necessary welding work complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | S & F in repairs 150 mm over all length floor door stopper, bearing ISI mark, of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | S&F in repairs rubber based door seal fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width min 50mm & lengthas required at site complete all as specified and as directed by Engineer-in-Charge. |
| 20 | S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod and including02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and as directed by the Engineer-in-Charge.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 21 | S&F in repair Vitreous china premium/1st quality urinal bowl type of white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified and as directed by Engineer-in-Charge. |
| 22 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm diapipe. (Minimum weight 60gms) complete all as specified and as directed by Engineer-in-Charge. |
| 23 | S&F in repair 6mm thick of size 600x450looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F in repair double action floor spring ISI marked hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&F in repairs mortice lock brass 4 levers vertical type with handle, size 100mmcomplete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F in repairs steel rolling shutters, 1.00mm thickness of lathswith out ball bearing,but gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete all as specified and as directed by the Engineer-in-Charge. Note :- Rate including greasing, change of rod, lock, cover hood and other accessories as required. |
| 27 | Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floorsetc complete all as specified and as directed by Engineer-in-Charge. |
| 29 | S&F in repairs PVC (SWR) bends 110 mm dia any radius with access door complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L for mild steel framed work as in doors or gates of angle Gde-Fe-290( Gde-E-165) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer-in-Charge. |
| 31 | M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting, 0.50 mm thick, of an colour having tensile strength of 550 Mpaas in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete all as specified and as directed by Engineer-in-Charge. |
| 35 | S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium / G.I./M.S. as per specification and drawing,including Anodised aluminium snap grid frame work for false ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer instruction complete all as specified and as directed by Engineer-in-Charge. Note :- colour/pattern as approved by AGE(I). |
| 37 | Dismantling of existing unserviceable RCC/PVC water tankand S&F for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Dismantling of existing unserviceable RCC/PVC water tank and S&F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Dismantling of stone boulder masonary built in lime mortar including all quoins, arches, pillars etc for ashlar facings, dressed stone work precast concrete articles complete all as specified and directed. |
| 40 | M&L for 40mm thick jodhpur jaisalmer stone a jall in frame set in cement mortar 1:4etc complete all as specified and as directed by Engineer-in-Charge. |
| 41 | M&L for rendering 10mm thick ready mix plaster on internal wall by adding potable water by weight of material as mentioned by manufacturer ready mix plaster shall comply with IS-1661-1972,IS-2402-1963,IS-2250-1981 and shall confirm 28 compressive days compressive strength 10-15 MPA bulk density 1600-1800 kg/cum and pull out bond strength->0.5 MPAetc complete all as specified and as directed by Engineer-in-Charge. |
| 42 | M&L for rendering 5mm thick ready mix self curing plaster on ceilingby adding potable water by weight of material as mentioned by manufacturer ready mix plaster shall comply with IS-1661-1972,IS-2402-1963,IS-2250-1981 and shall confirm 28 compressive days compressive strength 10-15 MPA bulk density 1600-1800 kg/cum and pull out bond strength->0.5 MPAetc complete all as specified and as directed by Engineer-in-Charge. |
| 43 | S&F in repair Gun-metal,globe or gate valves with iron wheel head,screwed both ends for iron pipe and fixed to 20mm dia of pipe complete all as specified and as directed |
| 44 | S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacityPVC tank complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Disconnecting existing tanks exc. 250 Ltrs but not exc. 500 Ltrs capacity PVC water tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed by the Engineer-in-Charge. Note :- Cleaning repairing, etc. measured separately under relevant item |
| 46 | M&L for cleaning and removing, exc. 250 Ltrs but not exc. 500 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Disconnecting existing tanks exc. 500 Ltrsbut not exc 1000 Ltrs capacity PVC water tank, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed by Engineer-in-Charge. Note :- Cleaning repairing, etc. measured separately under relevant item |
| 48 | M&L for cleaning and removing exc 500 Ltrsbut not exc. 1000 Ltrs capacity PVC water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed by Engineer-in-Charge. |
| 49 | S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm - 690 gms) fixed to 15mm dia of pipe complete all as specified and as directed by Engineer-in-Charge. |
| 50 | S&F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directedjoint run and leadfront or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 type B 1 using 20mm graded stone agregate complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Dismantling and and taking down WC pan existing of any description/size andS&F Vitreous china premium/1st quality wash down water closet pan floor mounting Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe,etc.,with flush pipe PVC 32mm dia and including plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and including all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F. complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S&F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge. |
| 53 | Dismantling and and taking down flushing cistern of any description/size andS & F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing complete all as specified and as directed by Engineer-in-Charge. |
| 54 | S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer\"s instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-Charge. Note : The items for counter will be measured and paid separately. |
| 55 | S&F in repair PVC connection 450mm long and 15 mm dia with brass fly nut at both ends complete all as specified and as directed by Engineer-in-Charge. |
| 56 | M&L for granite of imperial red (colour as approved by Engineer-In-Charge) of any type machine cut as in shelves/steps/counter tops 20mm thick set and jointed in cement slurry over and including screed of 15mm thick/rendering in cement mortar 1:4 and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slab and including rubbing,cutting and mirror type polishing and bull nose on exposed sides complete all as specified and as directed by the Engineer-in-Charge. Note : Single piece should be used insteps/cills/jambs/shelves |
| 57 | S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall complete all as specified and as directed by Engineer-in-Charge.Make :-Model No. FQ9206160 or equivalent midel as approved by AGE(I). |
| 58 | S&F in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipecomplete all as specified and as directed by Engineer-in-Charge. |
| 59 | S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed by Engineer-in-Charge. |
| 60 | S&F in repair angular stop cockfancy type chromium plated cast copper alloy screwed down, high pressure, screwed ends with wall flange for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 61 | S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Taking down or up existing GI tubing & connections and S&F 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Taking down or up existing GI tubing & connections and S&F20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and as directed by Engineer-in-Charge. |
| 64 | S&Fin repaircorner glass shelf size 300 mm radius with and including bracket and glass complete set etc complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S&F in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc. complete all as specified and as directed by Engineer-in-Charge. |
| 66 | S&Fin repair stainless steel Towel Rack with lower hanger size 24\"\" (600 mm) fixed to walls with hook etc complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&Fin repair of fancy typepillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 68 | S&F MS hollow rectangular/square/circular tubes/pipes of Fe 410-W (Gde E-250) quality A as in frame work for roofs / rafter / purlin / chajjas / trusses / column / struts etc and like similar items etc omplete all as specified and as directed by Engineer-in-Charge. |
| 69 | S&F in repairs tubular towel rail brass chromium plated 20 mm diaD-type60 cm long between flanges, including brackets and fixed to walls complete all as specified and as directed by Engineer-in-Charge. |
| 70 | S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to rigid UPVC waste pipe bent to shape & fixed to wall with bracket overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge. |
| 71 | S&F in repairs stainless steel sinkmade out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracketof 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge. |
| 72 | S&F in repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB upto floor level complete all as specified and as directed by Engineer-in-Charge. |
| 73 | S&F in repairs PVC mirror cabinet of size 300x450mm of selected quality glass fixed in PVC cabinet complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Taking down old PVC floor trap and M&L for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, fixed in floor complete all as specified and as directed by Engineer-in-Charge. |
| 75 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floorsetc complete all as specified and as directed by Engineer-in-Charge. |
| 76 | S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S&F in repairs PVC (SWR) junction single,(Single T) 75mm dia equal or unequalwith access door complete all as specified and as directed. |
| 78 | S&F in repairs stainless steel grating 150 x 150 mm size square / rounded as per required shaped cera cat no CP 134 with cockroach trap for flor trap fixed in position complete all as specified and directed. |
| 79 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 80 | Demolition of cement concreteun -reinforced in ground floors and pavings n.exc 15cm thicknesscomplete all as specified and as directed by Engineer-in-Charge. |
| 81 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X350X7mmin any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 82 | M & L for Non-skid ceramic premium quality coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 83 | M&L for Single charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 15mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified and as directed by Engineer-in-Charge. |
| 84 | M&L for 25mm thk PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base of floors & finishing the surface even & smooth without using extra cement omplete all as specified and as directed by Engineer-in-Charge. |
| 85 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.Note : Work will be in patches or in bulk |
| 86 | S&F in repair 15mm bib tap (2 in 1 type) modle no BC-9876 of brass, chromium plated fancy type glossy finish complete all as specified and as directed by Engineer-in-Charge.Make :- cera catpart No.o F1015163 or equivalent make of Jaguar/handware/cera/prayag as approved AGE(I). |
| 87 | M&L for Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointedwith grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge. Note : Work will be in patches or in bulk |
| 88 | M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thickcement plaster 1:3jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Demolition of cement Concrete (unreinforced)of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 90 | M&L for providing precast cement concrete type B-1 (1:2:4) with 20mm garded stone aggregate as in copings, apex stones, columns, posts, boundary pillars, frame of jallies etc and setting in mortar 1:4 complete with joints to match complete all as specified and as directed. |
| 91 | Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and as directed by Engineer-in-Charge. |
| 92 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed by Engineer-in-Charge. |
| 93 | M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type brought upto courses complete all as specified and as directed by Engineer-in-Charge. |
| 95 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed by Engineer-in-Charge. |
| 96 | M&L for rendering 15 mm (thick in two layers, first layer 10 mm thick with ready mix plaster and outer layer 5 mm thick rady mix water proof plaster ) on external walls by adding potable water by weight of material as mentioned by manufacturer ready mix plaster shall comply with IS-1661-1972,IS-2402-1963,IS-2250-1981 and shall confirm 28 compressive days compressive strength 10-15 MPA bulk density 1600-1800 kg/cum and pull out bond strength->0.5 MPAetc complete all as specified and as directed by Engineer-in-Charge. |
| 97 | M&L for preparation of platered surface of ceiling and applying three coats of white washcomplete all as specified and as directed by Engineer-in-Charge. |
| 98 | Supply only integral liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 99 | M&L for applying 3mm thick wall care putty on wall for desired smoothness and levelling of surfaces in two or more layersfor receivingpainting complete all as specified and as directed by Engineer-in-Charge. Notes : (i) The prepared surface after wall putty, the contractor will inform to the AGE(I) as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the AGE(I) as well as to the Engineer-in-Charge through site order. |
| 100 | M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed by Engineer-in-Charge. |
| 101 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 102 | M&L for 50mm thick plain cement concrete type C2 (1:3:6) with 20mm graded stone aggregate in plinth protection complete all as specified and as directed by Engineer-in-Charge. |
| 103 | S&F brass chromium plated health faucet with 1 metre long flexible tube and ABS wall hook including making connection complete all as specified and as directed by Engineer-in-Charge.Make : cera cat part No. F8030104 or equivalent make of Hindrane / parryware as approved by AGE(I). |
| 104 | S&F powder coated 50 microns extruded aluminium frame for fixed type partition (standard two panel pattern) made out of powder coated aluminium section of size 63.5x38.1x1.5mm comprising of 5mm thick tinted glass inserted in and including necessary jointing cleats,rubber packing,anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete existing partition with all fitting and fixures complete all as specified and as directed by Engineer-in-Charge.Make ofAluminium section : Jindal/Valco/Galco/Hindalco or equivalent makeas approved by AGE(I). |
| 105 | S&F toughned glass 12mm thick as in hinged doors,partitions automatic doors and similar work including cutting to shape,drilling holes with all accessories like handles,stopper with glazing with beads fixed with metal panel pins (beads to be measured sepertely as supplied only) as required including hacking out glass complete all as specified and as directed by Engineer-in-Charge. |
| 106 | E/M WORK :-Taking down existing unserviceable point wiring of any description / type / size of light / fan /power /two way /bell etc on TW batten/ conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed by Engineer-in-Charge. |
| 107 | M&L for Point wiring with 1.5 Sq mm copper conductor single core PVC insulated FRLSH 1100 Volts multistranded drawn through and including rigid PVC Casing and Caping as required at site and conduit accessories of suitable dia medium grade in existing MS boxes duly cleaned as per existing site covered with new suitable sheet 3 mm thick for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly and making good surfacefor One light/fan point controlled by one, one way switch 5 amps SP complete all as specified and as directed by Engineer-in-Charge. |
| 108 | All as per Ser item No. 107.00 above herein-before but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board . |
| 109 | All as per Ser item No. 107.00 above here-in-before but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 110 | All as per Ser item No. 107.00 above here-in-before but for OneBell point controlled by one, one way switch 5 amps, SP |
| 111 | All as per Ser item No. 107.00 above here-in-before but for using4 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combinationpoint on independent boardincluding running of 4 Sq mm copper conductorPVC insulated cable as earth continuity conductor |
| 112 | M&L for point wiring in concealed conduit complete all as specified with 1100 volts grade 1.5 sqmm PVC insulated FRLSH, multistraded copper conductor conforming to IS:694:1990 with ISI marking (For Phase, Neutral and Earth) in and including Non mettalic PVC rigid conduitmedium grade with ISI mark of size 20 mm dia with all accessories concealed in wall / ceiling / roof etc, for fixing modular switches, sockets fan regulators etc of suitable modules and earth wire to be connected to common earth dolly and making good surface for One light/fan point controlled by one, one way switch 5 amps SP complete all as specified and as directed by Engineer-in-Charge. Note : Modular cover plate with frame, flush box and modular switches will be inclusive of rate quoted. |
| 113 | All as per Ser item No. 112.00 above here-in-before but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board . |
| 114 | All as per Ser item No. 112.00 above here-in-before but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 115 | All as per Ser item No. 112.00 above here-in-before but for OneBell point controlled by one, bell push |
| 116 | All as per Ser item No. 112.00 above here-in-before but for using4 Sqmm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combinationpoint on independent boardincluding running of 4 Sq mm copper conductorPVC insulated cable as earth continuity conductor complete all as specified and as directed by Engineer-in-Charge. |
| 117 | S&F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 118 | S & F switch piano single pole flush type 15 amps, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 119 | S&F bell push 5 A flush type complete all as specified and as directed by Engineer-in-Charge. |
| 120 | Supply and fixsocket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 121 | Supply and fixsocket outlet flush type multipurpose 2 in 1, 3 Pin, 5/15 amps, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 122 | S & Fswitch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1230 Volts complete all as specified and as directed. |
| 123 | S & Fswitch socket combination 5 in 1 multipurpose 3/5 pin 5/15 amps flush type with complete all as specified and as directed by Engineer-in-Charge. |
| 124 | S & FS & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and as directed by Engineer-in-Charge. |
| 125 | S&Fbell (buzzer / ding dong) working on 230 volts AC Supply complete all as specified and as directed by Engineer-in-Charge. |
| 126 | S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed by Engineer-in-Charge. |
| 127 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 128 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge. |
| 129 | Supply and Fix 4ft LED tube rods of 18/20/22 Watt complete including taking down complete all as specified and as directed by Engineer-in-Charge. |
| 130 | Supply and fixing round shape or square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 131 | Supply and fixing LED street light fitting 35 watt 230 VAC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge. |
| 132 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 133 | S & F LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 134 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge. |
| 135 | All as per Ser item No. 134.00 above here-in-before but for 40 Amps SP MCB |
| 136 | All as per Ser item No. 134.00 above here-in-before but 32 Amps SPN MCB |
| 137 | All as per Ser item No. 134.00 above here-in-before but 40 to 63 Amps SPN MCB |
| 138 | S&F miniature circuit breaker (MCB) 415V 10KA \"C\" curve poles and current carrying capacity in the DB complete with connection testing and commissioning for TPN/FP 40 to 100 AMP complete all as specified and as directed by Engineer-in-Charge. |
| 139 | S&F sheet metal enclosure MCB DBSPN 4 way with 200 amps rated bus bar 240 volts double door with locking system complete including taking down of old unsv MCB DB all as specified and as directed . |
| 140 | All as per Ser item No. 139.00 above here-in-before but SPN 8 way DB |
| 141 | All as per Ser item No. 139.00 above here-in-before but SPN 12 way DB |
| 142 | S&F horizontal type TPN DB 4 way single door made out of CRCA sheet housing duly powder coated and confirming to IS Specifications complete all as specified and directed by Engr-in-charge. |
| 143 | S&F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed by Engineer-in-Charge. |
| 144 | S&F MCCBs 415V, 25KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified and as directed by Engineer-in-Charge. |
| 145 | All as per Ser item No. 144.00 above here-in-before but 63 Amps, 10 KA |
| 146 | M&L for Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and as directed by Engineer-in-Charge. Note :- Two runs of cable, one run of earth wire and one run of PVC conduit will be measured as one unit |
| 147 | All as per Ser item No. 146.00 above here-in-before but 2 runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductor complete all as specified and as directed by Engineer-in-Charge.Note :- Two runs of cable, one run of earth wire and one run of PVC conduit will be measured as one unit |
| 148 | All as per Ser item No. 146.00 above here-in-before but for submain wiring with 4 runs of single core 6sqmm including one run of single core 6 sqmm PVC insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor complete all as specified and as directed by Engineer-in-Charge.Note :- Four runs of cable, one run of earth wire and one run of PVC conduit will be measured as one unit |
| 149 | Supply and replace Fan condenser 2.5 mfd complete all as specified and as directed by Engineer-in-Charge. |
| 150 | Supply and replace fan condenser of 4.00 Mfd complete all as specified and as directed by Engineer-in-Charge. |
| 151 | Supply and replace split pins/lock pins for ceiling fans complete all as specified and as directed by Engineer-in-Charge. |
| 152 | Supply and replace MS Clamp with rubber bushes, bolts & nuts for ceiling fan along with lock pin complete all as specified and as directed by Engineer-in-Charge. |
| 153 | M&L for repairs to copper inner container like denting, soldering, brazing, leak testing and reassembling of any Ltrs capacity water heater (Geyser) complete all as specified and as directed by Engineer-in-Charge. |
| 154 | Supply and replace Geyser element2000 watts of any type or as per site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 155 | Supply and replace Thermostat complete all as specified and as directed by Engineer-in-Charge. |
| 156 | Supply and replace Indicator bulb 230 V suitable for any make and colour complete all as specified and as directed by Engineer-in-Charge. |
| 157 | Supply and replace PVC Cold/Hot water connection pipe 45 cms long 15 mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 158 | M&L for rewinding of burnt ceiling fan of 1200 / 1400mm sweep motor with supper enameled copper wire of suitable size including repainting with white colour of any make, type, model including transportation complete all as specified and as directed by Engineer-in-Charge. |
| 159 | All as per Ser item No. 158.00 above here-in-before but rewinding of burnt Exhaust fan of 225 / 300mm sweep motor complete all as specified and as directed by Engineer-in-Charge. |
| 160 | M&L deep grove ball bearings 6202 / 6201 suitable for ceiling fans / exhaust fans of any type complete all as specified and as directed by Engineer-in-Charge. |
| 161 | S&F of ceiling fan / exhaust fan shaft as per the site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 162 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GIearth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion complete all as specified and as directed by Engineer-in-Charge.Note : GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate |
| 163 | Supply and replace Service wire twin core of 10.0 sq mm multistranded 1100 grade complete all as specified and as directed by Engineer-in-Charge. |
| 164 | Cutting chases,pinning in,making goo to facing where required and pointing in cement mortar 1:3 to ends or edge of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc for stone concrete block or slab walls and making good,cutting exceeding 20 cm girth complete all as specified and as directed by Engineer-in-Charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
