Tender For Repair Replacement Of Compound Bdy Wall Area Drainage Retaining Wall Fencing And Other Misc Works At Aad Centre And Aad Records Under Ge I Gos; 1 Dismantling of AC/GI plain/Corrugated / semi corrugated roof sheets any type and any size ,complete all as specified and directed. 2 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ,complete all as specified and directed. 3 Dismantling structural steel work including doors, gates but excluding framed truss etc ,complete all as specified and directed. 4 S&F Mild steel workin tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 ,complete all as specified and directed. 5 S & F steel Fe-410-W (Gde 250 Quality-A) work in tubular stanchion/postincluding special shaped washer etc. complete using one of more tubes or induction butt welded tubes conforming to IS-1161- 1979 grade St.-240 ,complete all as specified and directed. 6 S&F mild steel work Fe-410-W (Gde 250 Quality-A) in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment,complete all as specified and directed. 7 M&L for MS Framed work of Fe 410 W (Gde-E-250) Quality A, as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing ,complete all as specified and directed. 8 M&L for preparationof new/old or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer ,complete all as specified and directed. 9 Excavation in post holes (or similar holes) each n exc. 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25cm ,complete all as specified and directed. 10 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish from site ,complete all as specified and directed 11 Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed,complete all as specified and directed 12 Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded ) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top offootings; including attached pilaster and buttresses,complete all as specified and directed 13 M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings nd similar work including attached pillasters butterssess etc vertical or to batter , complete all as specified and directed. 14 M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. 15 M&L for Hard core of broken stone or boulders of guage n exc. 63 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface. Complete all as specified & as directed. . 16 M&L Moorum / Red bajri filling in floors or pavings, laid in layersspread levelled and rammed incl watering etc complete all as specified and directed. 17 Demolition of cement concrete unreinforced in ground floor and paving not exc 15cm thick (below or above ground level) complete all as specified and directed. 18 M & L P:C:C 1:4:8 Type D2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. 19 M&L for 100 mm thick Cement concrete 1:4:8type D-2using 40 mm graded stone aggregate as in sub base complete all as specified and directed. 20 M&L for 100 mm thick Cement concrete 1:4:8type D-2using 40 mm graded stone aggregate as in sub base complete all as specified and directed. 21 M&L for 50 mm thick Cement concrete 1:2:4type B-1using 20 mm graded stone aggregate as in flooring incl finished cement concrete surface even and smooth complete all as specified and directed. 22 M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. 23 M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching, roof kerbs or mud stopsrounded or chamfered on edges including necessary use and waste of form work complete all as specified and as directed. 24 M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. 25 M&L for Pre Polished Chequered cement concrete tiles of size 200 mm x 200 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. 26 Providing and laying 60mm thick factory made chamfered edghe pre polished cement concrete interlocking paver block of M-35 grade with approved color, design and pattern as in footpath , parks, lawns, drive waysor light traffic parking etc, of required strength , thickness and size / shape, made by table vibratory method using PU mould , laid in required color, pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding / laying of interlockingpaver block into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern , finishing and sweeping extra sand, complete all as specified and directed. 27 M&L for Vitrified Parking Tilesof size 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment,complete all as specified and directed.20 mm thick screed bed in CM 1:4 complete all as specified and directed. 28 Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 29 M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. 30 M&L old size Brick work using fly ash bricks straightor curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. 31 M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick workor concrete surfaceof walland to be finished even and smooth with out using extra cement complete all as specified and directed 32 M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick workor concrete surfaceof walland to be finished even and smooth with out using extra cement complete all as specified and directed 33 M&L TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 34 All as Item No- 33 above but 6 to 8mm dia as in stirrups 35 S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n exc 15cm long and dia of neck 11 mm to 15 mm 36 Form work to sides of concrete foundations, footings, bases of columns, raft and rafts beams, sides and soffits (in any ) of foundation and plinth beams etc and similar work, vertical or to batter for Fair finishedsurfaces ,complete all as specified and directed. 37 S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) 38 Dismantling fencing wire mesh any size or type,and removing the site complete all speciified and directed 39 S&F PVC insulated chain link fencing including line wire of size 3.15 mm dia and 100x100 mm mesh made up in mattresses or cases, lapped wire and laid in position to RCC fenccing and straining and fixing to any type of posts, straining bolts, standard bolt, incl securing or tying at crossing with and including provision of galvanized mild steel wire sraples or steel pins etc complete all as specified and directed (each line of wire to be measured for the purpose of payment),complete all as specified and directed. 40 S&F 600 mm dia (whwn unstretched) punched tape GI concertina coil having 50 to 53 spirals turns per 5 RM of streched length, dia 2.59 mm of GI core wire with 0.5mm thick , 19 mm wide electro galvanised steel strip with widthof barbs 11.5 mm and pitch of bards 25.4 mm with clips , complete all as specified and directed. 41 S&F Flat Iron strip 40 mm x 6 mm for securing chain link fencing with RCC posts incl drilling holes, notching for wire etc.for inserting bolts incl all necessary drilling, bolting or riveting etc.,complete all as specified and directed. 42 M&L fortwo coats of white wash on previously untreated (new) surface of RCC posts or wall incl preparation of surface ,complete all as specified and as directed . 43 M&L preparation of old painted surfaces and applying one coat of white wash but on wallscomplete all as specified and as directed . 44 M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. 45 M & L for one coat of cement based paint on old plastered surface of walls including preparation of surfaces complete all as specified and directed. 46 M&L for preparing old plastered surfaces of walls, Facias, cornices etcand apply one coat of weather proof exterior emultion (Make as approved by GE) Complete all as specified and directed. 47 M&L for preparation of old plastered surfaces of ceilings and applying one coat of white wash , complete all as specified and directed.. 48 M&L for preparation of old plastered surfaces of ceilings and applying one coat of oil bound distempercomplete all as specified and directed.. 49 M&L Preparation of old wooden surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint over a coat of primer, complete all as specified anddirected. 50 M&L for preparationof old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed.
