Tender For Special Repair/ Replacement Of Street Light And Special Repair/ Replacement Of Ber Ceiling Fans And Exhaust Fans In Jorhat Military Station Under Ge Jorhat.; 1 Supply and fix for, ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC), complete all as specified and directed. 2 Supply and fix for, ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep, min air delivery 245 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC), complete all as specified and directed. 3 Supply and fix for, exhaust fan, steel body AC single Phase 230V of size 300mm sweep with, blades, frame and louvers including necessary hole for insertion of exhaust fan, complete all as specified and directed.Note: (i) The item is inclusive of making holesor making existing opening suitable for the installation of exhaust fan as per site condition (ii) Louvers for the exhaust fan shall be made of GI sheet, suitably and properly fixed to the opening. 4 Supply and fix for, exhaust fan, steel body AC single Phase 230V of size 380mm sweep with, blades, frame and louvers including necessary hole for insertion of exhaust fan, complete all as specified and directed.Note: (i) The item is inclusive of making holesor making existing opening suitable for the installation of exhaust fan as per site condition (ii) Louvers for the exhaust fan shall be made of GI sheet, suitably and properly fixed to the opening. 5 Supply and fix for, exhaust fan, steel body AC single Phase 230V of size 450mm sweep with, blades, frame and louvers including necessary hole for insertion of exhaust fan, complete all as specified and directed.Note: (i) The item is inclusive of making holesor making existing opening suitable for the installation of exhaust fan as per site condition (ii) Louvers for the exhaust fan shall be made of GI sheet, suitably and properly fixed to the opening. 6 Supply and fix for, LED street light fittings of 60W made of pressure die cast aluminium housing with toughened glass cover, IP66 protection, high power LEDs with secondary lenses and system efficacy should be minimum 110 Lumen per watt and LM79 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection and external 10KV surge protection inside luminaire housing for trouble free service life all as per Cat No.SLE UL 60W IP66 LXN G1 of M/s Surya Pvt Ltd or make as specified in PS . THD shall be <10%, Power Factor >0.95, CCT 5700K and Brand name should be embossed/engraved on the LED fitting for traceability till life. Warranty should be 2 years and warranty certificate should be provided on OEM letterhead at the time of delivery, complete all as specified and directed. 7 Supply and fix for, 120W LED flood light made of pressure die cast aluminium housing with integrated polycarbonate IP lens cover, IP66 protection and system efficacy should be greater than 120 lumen per watt and LM79 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection and external 10KV surge protection inside luminaire housing for trouble free service life. THD shall be <10%, Power Factor >0.95, CCT 5700K all as per Cat No.SLE FL 120W IP66 RADIANCE/Havells/Bajaj as approved, brand name should be embossed/ engraved on the LED fitting for traceability till life. Warranty should be 02 years andcertificate shall be provided by the contractor on OEM letterheadat the time of delivery, complete all as specified and directed. 8 Supply and fix for, 200W LED flood light made of pressure die cast aluminium housing with integrated polycarbonate IP lens cover, IP66 protection and system efficacy should be greater than 120 lumen per watt and LM79 report should be provided from NABL accredited lab. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection and external 10KV surge protection inside luminaire housing for trouble free service life. THD shall be <10%, Power Factor >0.95, CCT 5700K all as per Cat No.SLE FL 200W IP66 RADIANCE/Havells/Bajaj as approved, brand name should be embossed/ engraved on the LED fitting for traceability till life. Warranty should be 02 years andcertificate shall be provided by the contractor on OEM letterheadat the time of delivery, complete all as specified and directed. 9 Supply and fix for, street light bracket, fabricated out of 40mm bore GI tubing light grade, 1.5m length bend to the shape, mounting with MS clamp of flat iron size 40 x 5mm of suitable length 2 pairs including nut and bolts etc suitable size duly painted with two coats of aluminium paint over a coat of zinc chrome red oxide primer, complete all as specified and directed. 10 Material and labour for, earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.50 metre below normal ground level connected to galvanised steel earth lead strip 25 x 4mm by means of bolts, nuts, check nuts and washers of galvanised steel and connected to main switch boardor main control board as directed and including provision of concrete earth pit in PCC (1:3:6) type C1, 50mm thick pre-cast RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) cover slab (Reinforced with 8mm dia TMT bar @15cm centre to centre bothways and suitable handle made of 10mm dia), provision of funnel, wire mesh, 20mm bore galvanised steel tubing (medium grade) for watering, charcoal or coke and salt in alternate layers of 15cm (compacted thickness), 40mm bore galvanised steel tubing (light grade) for protection of earth lead connection, necessary excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No.3 of SSR Part-I (2009) including testing on completion.(Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in the unit quoted rate). 11 Supply and fix in repair for, 25-30 KW, 3 Phase nature switch (Using infrared sensor technology) based automatic street light timer switch for automatic switching on/ off street light based on lux level of nature light (required illuminance level for switching ON is ≤ 60 Lux and for switching off ≥ 10 lux). The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs, consisting of sensor, overload protection fusegear, 3 Nos contactor, 3 Nos INCOMING MCBs & 3 Nos outgoing MCBs of 63 Amps per phase each and circuit wiring (Copper) of min 10 Sqmm terminal blocks for cable entry and control unit enclosed in pole/ wall mounted enclosure made out of rust proof, electric shock proof, termite proof thermoplastic polycarbonate enclosure (with hinged lid) conforming to IP66 protection fixed to pole by using MS clamps fabricated out of 25mm x 3mm thickness, bolts and nuts as required at site, complete all as specified and directed. Make: Swadeep Cat No. Navdeep-66-25/30 KW 3P/ Havells/ Kaktiya Energy System Pvt Ltd / Indo Asian as approved.Note - (i) Price is inclusive of sensor, Contactor, Incoming/ Outgoing MCBs, Enclosure etc as complete (ii) SS nut bolts, clamp for fixing on poles/ wall are to be included in the quoted rates (iii) The Sensor must have the warranty of min of 2 years (iv) The test certificate and warranty certificate must be provided by the contractor. 12 Excavation in trenches, not exc. 1.5 m wide and not exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying pipe, cable, etc. n exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and directed. 13 Returning filling in soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exc. 25 cm, complete all as specified and directed. 14 Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. 15 Supply, laying, testing and commissioning of LT XLPE insulated, screened, PVC badded, galvanised steel strip or wire,armoured (heavy duty) electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core, complete all as specified and directed. 16 Material and labour for, sand cushioning (dry) in trenches for protection of UG cables (below, above and around the UG cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and directed.(NOTE : For the purpose of payment, punned thickness of sand cushioning only shall be measured and paid for). 17 Material and labour for, sub class B brick, well burnt, old size, flat, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for UG cable protection, complete all as specified and directed. 18 Supply and fix in repair for, 25-30 KW, 3 Phase nature switch (Using infrared sensor technology) based automatic street light timer switch for automatic switching on/ off street light based on lux level of nature light (required illuminance level for switching ON is ≤ 60 Lux and for switching off ≥ 10 lux). The sensor should also have part night operation facility of min. 4 hrs to max 12 hrs, consisting of sensor, overload protection fusegear, 3 Nos contactor, 3 Nos INCOMING MCBs & 3 Nos outgoing MCBs of 63 Amps per phase each and circuit wiring (Copper) of min 10 Sqmm terminal blocks for cable entry and control unit enclosed in pole/ wall mounted enclosure made out of rust proof, electric shock proof, termite proof thermoplastic polycarbonate enclosure (with hinged lid) conforming to IP66 protection fixed to pole by using MS clamps fabricated out of 25mm x 3mm thickness, bolts and nuts as required at site, complete all as specified and directed. Make: Swadeep Cat No. Navdeep-66-25/30 KW 3P/ Havells/ Kaktiya Energy System Pvt Ltd / Indo Asian as approved.Note: (i) Price is inclusive of sensor, Contactor, Incoming/ Outgoing MCBs, Enclosure etc as complete (ii) SS nut bolts, clamp for fixing on poles/ wall are to be included in the quoted rates (iii) The Sensor must have the warranty of min of 2 years (iv) The test certificate and warranty certificate must be provided by the contractor.
