Tender For Provision Of Toilet Block At Stn Hq Devlali And Ceratin Lbw Works Under The Aor Of Ge Devlali; 1 Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm ind cutting holes and making good read shape for hold fast block for new frame complete all as specified and directed. 2 Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. 3 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door window Ceosetory windows & other Frames Chowkhat of size 50 x 75 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder rice husk wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miller joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum Compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length as per direction of Engineer-in-Charge.(Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width for profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make: ECHON/Sintex/Rajshree/Navaratan. 4 S&F 30 mm thick moulded Prelaminated both side WPC factory made 100% solid door (conforming as per per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum. Manufactured by an ISO 9001-2015 certified company The door should be water proof, termite proof, fire retardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/mm2, modulus of elastic of elasticity 850N/MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fuing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note: Stainless steel butt hinges and necessary SS screws shall be paid separately) 5 S&F 100 mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed 6 SS & F Aluminum Anodised 150mm size barrel tower bolt with bright bolt complete all as specified and as directed. 7 S & F 150mm size aluminum adodised handles complete all as specified and as directed. 8 S & F for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast Each or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed 9 S & F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. 10 M&L for Glazed ceramic tiles of size 300mmx450mmx7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10 mm thick backing coat in CM(1:4) and pointed in coloured cement to match the colour of tile complete all as specified and directed. 11 M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular)size of tile 300mmx300mm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. 12 M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and likeincl 10mm thick rendering in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and mouldingcomplete all as specified and as directed . 13 Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. 14 M & L for Brick work with sub class B bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified. 15 M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed. 16 M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified. 17 M & L rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed. 18 M&L for preparing new plastered or unplastered surfacesputty prepared surfaces of walls, fins/facia/concrete surfaces and applying a coat of interior primer over two coats of oil emulsion distemperingcomplete all as specified and directed. 19 M & L for preparation of new plastered surface of wall,fins/facia/chajjas etc and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over a coat of exterior primer, exterior weather proof offer anti alge high performance exterior wall finish any colour/ tint complete all as specified and directed. Make: Asian (Apex Ultima), Berger (Weather coat). Nerolac (Excel Total) 20 Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. 21 M & L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed. 22 Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 23 Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 24 Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. 25 S & F 16mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and celings with adequate nos of clamps or laid in floors including cutting chases in stone concrete block or slab block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fttings required for fixing of sanitary plumbing items complete all as specified and as directed. (Note: No extra payment shall be made for cutting chases & CPVC & BRASS fittings) 26 S & F 20mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and celings with adequate nos of clamps or laid in floors including cutting chases in stone concrete block or slab block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fttings required for fixing of sanitary plumbing items complete all as specified and as directed. (Note: No extra payment shall be made for cutting chases & CPVC & BRASS fittings) 27 S & F 25mm dia CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and celings with adequate nos of clamps or laid in floors including cutting chases in stone concrete block or slab block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC & BRASS fittings such as (elbow, tee, socket, reducer, nipple, union, bushing, step over bends, end cap, end plugs, male/female threaded adaptor, flange, tank adaptor) and any other fttings required for fixing of sanitary plumbing items complete all as specified and as directed. (Note: No extra payment shall be made for cutting chases & CPVC & BRASS fittings) 28 S & F in repairs 20mm bore CPVC gate valves screwd both ends for CPVC pipes complete all as specified and directed. 29 S & F in repairs 25mm bore CPVC gate valves screwd both ends for CPVC pipes complete all as specified and directed. 30 S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. 31 S&F in repairs Vitreous China Urinal, Half stall type, white complete including providing and fixing plus, bedding urinal against wal in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed. 32 S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) S Trap/P Trap including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed. 33 S & F in repairs vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests and trap (excluding flushingcistem and flush pipe) including provn of cement concrete bedding complete as fixed. 34 S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed 35 S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. 36 S&F in repairs wash hand basins, vitreous china, of size 550x400mm with padestal (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of foxing of supply and waste pipe etc complete all as specified and as directed. 37 S&F in repairs CP wall mixer with provision for overhead shower with 115 mm Long Bend Pipe on upper side connecting Legs & wall flange Make Jaquar continental series or equivalent Cera, Marc or Parryware complete all as specified. 38 S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed. 39 S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. 40 S&F in repair 15mm bore Bib cock chromium plated Make Jaquar continental series or equivalent Cera, Marc or Paryware complete all as specified and directed. 41 S&F in repair 15mm bore angular stop cock chromium plated with wall flange of Make Jaquar continental series or equivalent Cera, Marc or Parryware complete all as specified and directed. 42 S&F in repair stainless steel soap dish, complete all as specified and as directed. 43 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) 44 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including fixing stac clamps complete all as specified and as directed. 45 S&F for 75mm bore of PVC (SWR) pipes single socketed in any leggth with rubber ring joints laid in trenches or in floors including. fixing stac clamps complete all as specified and as directed. 46 S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed. 47 S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. 48 S&F PVC (SWR) bend any radius 75mm complete all as specified and directed 49 S&F PVC (SWR) bend any radius 110mm complete all as specified and directed. 50 S & F in repair PVC (SWR) floor trap 75 mm bore plain with grating including jointing with solvent cement and fitting complete Each as spd and directed. 51 M&L for Coloured chequered cement concrete tiles 30cmx30cmx20-22 mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment over 15 mm thick screed bed in CM (1:6) including dismantling of existing chequered tiles of any type complete all as specified and as directed 52 M&L for coloured machine pressed precast cement concrete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-40 Grade with grey cement and pigment laid in floor/path incl dismantling complete all as specified and directed. 53 M&L for 75 mm thick Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring or in any position complete all as specified and directed. 54 Dismantling of posts or struts (wood, steel or R.C.C) any section embedded in concrete, including taking out embedded portion and making good disturbed ground all as specified and as directed. 55 Excavation in post holes(or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to distance not exc 50mand making good surfaces, complete all as specified and as directed. 56 M &L for PCC 1:4:8 type- D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and as directed. 57 S&F for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars, barred iron doors, ladders; framed balusters, walk ways, railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed. 58 M & L for Mild steel rolled sections Fe-410-W (Gde-E-250) as in Compound girders and stanchions, lattice girders, aerial masts. hollow pipes any sec for shed etc, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed. 59 M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified 60 S & F painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed. 61 S&F Pre-painted galvalume aluminium zinc coating Gi based plain steel sheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl filling of gaps between wall and sheet with PCC 1:2:4 (20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required cost of the same shall be deemed to be included in quoted rate complete all as specified and as directed. 62 Surface excavation n. exc 30 cm deep and averaging 15 cm deep getting out in soft and loose soil all as per specified and directed 63 Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed. 64 Returing filling in inci spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed 65 Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed. 66 Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and remqyal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed 67 M & L for 150 mm dia (internal dia) RCC hume pipe class NP-2 laid and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed. 68 M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 150 mm bore ind forming cradles complete all as specified and directed. 69 MSL for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed. 70 Taking down carefully existing unserviceable bitumen felt/ APP membrane including plaster/padding (any number of layers of any thickness of plaster or padding) etc and removing of the rubbish to a distance not exceeding 500m from the building and depositing complete all as specified and directed. 71 M&L for rendering 10mm thick CM (1:4) on RCC/ concrete roof/terrace surfaces mixed with water proofing liquid complete all as specified and as directed. Note: Water Proofing liquid shall be measured and paid separately. 72 Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. 73 M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under:-(a) Apply a uniform coat of primer at 0.70 kg/sqm over cement plaster.(b) 3 mm thick and weighing not less than 3.6 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen-based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary of surface complete as per manufacturers instructions(c) Apply two coats of bitumastic-alminium paint over the membrane over non assesible roof surfaces complete all as per manufacturers instructions and as directed 74 M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) complete all as specified and directed by engineer in charge. 75 M & L for TMT steel bars 10mm dia and over, cut to le ngth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all specified and directed. 76 All as per item above but Ms tie bars 8mm dia and over upto and including 8mm dia as in stirrups, spacers and binders complete all as specified and as directed. 77 M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement including complete all as specified and as directed. 78 M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished complete all as specified. 79 M & L for precast cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc.)chullah hoods,chajjas, water troughs, mangers, shelves and similar articles with plain facesand setting in morter complete with joints to match complete all as specified and directed. 80 Supply and laying of Reinforced concrete pipes, 200mm dia class NP 3 with one collar per length of pipe complete all as specified and directed. 81 M&L for concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200 mm & bore pipe, complete all as specified and directed. 82 M & L for RCC septic tank, design to carry sewage and sullage water, excavation in any type of soil PCC 1:4:8 below foundation, RCC M-30 Design mix in walls base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc, complete for 150 users all as per Drawing No. STD/S/2023/01 Sheet No. 1/2 to 2/2 date 11 OCT 2023 83 M & L for Sokage wells exc, in any type of soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intersepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonary/ filling with brick bats, complete of size 3.00M dia X 3.00 m deep for 150 users all as per Drawing No. CEPZ/2019/TD/03 Sheet No. 1/2 to 2/2 date 30.04.2019 84 M & L broken stone hard core of guage n.exc 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surfaces complete. 85 M & L for 100mm thick Cement concrete 1:2:4 Type B-2 (using 40mm graded agg) as in sub base complete all as specified and as directed. 86 M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete all as specified and directed. 87 M & L for Formwork to sides of pillars, posts, struts, piers,columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed. 88 Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. 89 M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough toreceive plaster all as specified and directed. 90 M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete. 91 M & L for RCC Type B-1 (1:2:4) using 20mm graded agg as in footings, plinth beamand bases of columns complete all as specified and as directed. 92 M & L for RCC Type B-1 (1:2:4) using 20mm graded agg as in beams,lintle/plinthbands cantilevers, bressumers, lintelover 1.5m clear span supported on walls complete all as specified and as directed. 93 M & L for RCCType B-1 (1:2:4) using 20mm graded agg as in columns , piers postsand struts complete all as specified and as directed. 94 M & L for RCC Type B-1 (1:2:4) using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed. 95 M & L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint after one coat of white primer complete all as specified and directed by engineer in charge. 96 M & L for preparing newly plastered surfaces of ceiling incl preparation of surfaces and applying three coats of white wash complete as spd and directed. 97 M & L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified. 98 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x1005mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan 99 M & L for rolled mild steel work angle ironas in door frame (Chowkhats) confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. 100 M & L for Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed. 101 M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to newsteel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. 102 S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete. 103 S & F vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete asfixed complete all as specified. 104 S & F vitreous china wash down water closet pan (pedestal pattern), EWC white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified. 105 S & F 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified. 106 S & F 15 mm dia CP Stop valves/angle valve, cast copper alloy, screwed down, high pressure,fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified. 107 S & F 15 mm dia CP bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified. 108 S&F CP wall mixer with provision for overhead shower with 115 mm Long Bend Pipe on upper side connecting Legs & wall flange Cat Pot No FLR-5273UPR of Jaquar or equivalent in kohlar, grohe and Roca complete all as specified and directed. 109 S&F Centre hole basin mixer with Popup Waste System with 450 mm Long Braided Hoses 20 mm cartridge size mm dia, Cat Pot No FLR-5167NB of Jaquar or equivalent in kohlar, grohe and Roca completeall as specified. 110 S&Fchromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs. 111 M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6, complete all as specified and as directed. 112 M & L for glazed ceramic tiles in vertical surface 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed. 113 S & F PVC (SWR) floor trap 75 mm boreplain with grating including jointing with solvent cement and fitting complete all as spd and directed. 114 S&F vitreous china wash hand basin counter oval type size 600x425x195mmunder granite slab with all fitting and fixturescomplete all as specified and as directed. 115 S & F for 32mm Bottle trap of CP having minimum water seal of 25mm .(Minimum weight complete all as specified and as directed. 116 S&F Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, sprinkler etc pointing around urinal back in cement, including waste pipe, CP urinal spreader complete all as specified and as directed. 117 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including fixing stac clamps complete all as specified and as directed. 118 S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. 119 S&F for 110mm PVC (SWR) vent cowl complete all as specified and as directed. 120 M&L for rendering 10mm thick CM (1:4) on roof slab top and sides finished even and smooth without using extra cement, mixed with water proofing liquid complete all as specified. 121 M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.70 kg/Sqm.ii) Providing and laying3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturers.iii)Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturers instructions and as directed . 122 M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded glossy finish with coloured cementandpigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. 123 Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittingsand making good disturbed surfaces of walls, floor etc.complete all as directed. 124 M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cableand one single core 1.5 sqmmsizecopper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc.fixed in recess of wall with brass chromium plated screws and cap washer complete for 125 One light point controlled by one switch 126 One 5 pin socket outlet. 5 Amps on the same board. 127 One 5 pin socket outlet. 5 Amps on the independent. board 128 One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire. 129 Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied . 130 Supply and fix switch socket combination 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed. 131 Supply and fix switch socketcombination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed. 132 Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed. 133 Supply and fix in repair sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed ofsize 8 Ways 134 Supply and fixing amp rating 240V,10KAC curve MCBand current carrying capacity in the MCB DB complete with connection testing and commissioning of SP 6 to32 Amp complete all as specified and directed. 135 Supply and fixing amp rating 240V,10KAC curve MCBand current carrying capacity in the MCB DB complete with connection testing and commissioning of SPN32 Amp complete all as specified and directed. 136 S&F wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten doubleside connection type complete all as specified anddirected. 137 S&F wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed. 138 Supply and fixMCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete. 139 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, air delivery > 800 CMH , 5 number of blades voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m with louvre for fixing of exhaust fan complete fixed with suitable size ply by cutting into suitable size as required complete. 140 Supply and fixing building LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. 141 M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 4 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed. 142 S&F in sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed. 143 S & F Geyser 25 Ltrs, vertical mount, 5 star rated, glass line coated tank with adjustable thermostat, suitable for ,230 volt, 2 kw , 50 Hz electric supply . 144 Supply, Laying , jointing and testing in replacement of LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and directed of size 16 Sqmm 2 core. 145 M&L forXLPEinsulatedarmoured heavy duty electric cable with aluminium conductor, 1100V grade, cross sectional area as given th size of 10 Sqmm 2 Core 146 Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable, water pipe and getting out in soft/loose soil complete all as specified and directed. 147 Returning, filling in excavated soil in trenches including spreading, leveling, watering and well rammingin layers n. exc. 25 cm thick complete all as specified and directed 148 Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 149 Supply & lay in trenches double walled corugated HDPE pipe 50 mm diafor protection of under ground cables( Note: pipe couplers with seal, bends, end coversetc are deemed to be included in rate quoted) 150 S&F LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCAsheet with snap on installer sutable fordouble side connection LED tube in and including batten and tube etc complete in all respect. 151 S&F 25 Watt New generation energy saving and environmental friendly long life LED Security light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07. 152 M & L for bracket made out of GI tubing 40 mm dia,light grade 0.75 mtr long including fixing withMS clamps -2 Nos made out of 25 mm wide 4 mm thick flat iron with M.S. nuts, bolts/screw-4 Nos & flat washer01 No. for each including preparation of steel surfaces and painting with two coats of paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed. 153 M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground all as specified and directed (earth pit not less than 2.25m below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to GI wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron all as shown in Electrical Plate No. 3 connected to earth test point all as specified or indicated and testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover, GI protection pipe 15mm bore light grade , watering pipe, wire mesh etc. all as specified and directed by Engineer-in-Charge. 154 Supply and lay 40 mm bore GI tubinglight grade, ISI marked, for cable protectionatroad crossing/floor/wall/ on poles or at any indicated situation etc duly sealed at both end after drawing cable including necessary clamps,saddels etc complete all asspecified and as directed. 155 Supply , lay, connect and test GI tubing 25 mm bore medium grade ISI marked with all fittings laid intrenches etc complete all as specified and as directed. 156 Supply and fixing gun metal globe or gate valve with iron wheel head screwed both end for iron pipe and fixed of 25 mm bore complete all as specified and as directed. 157 Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 20 mm complete all as specified and as directed. 158 Note: Amount of sch of credit of Rs.25,671/-will be deducted from total amount of BOQ.
