|
| 1 | Earthworkinexcavationbymechanicalmeans(Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer in charge All kinds of soil |
| 2 | Providingandlayinginpositioncementconcreteofspecified grade excluding the cost of centering and shuttering.All work upto plinth level 1:5:10 (1 cement 5 fine sand 10 graded stone Aggregate 40 mm nominal size) |
| 3 | Steel reinforcement for RCCwork includingstraightening, cuttingbending,placinginpositionandbindingallcomplete uptoplinthlevelandabovepinthleveluptofloorfivelevel Thermo-Mechanically Treated bars of grade Fe 500D or more |
| 4 | Providingandlayinginpositionspecifiedgradeof reinforced cementconcrete,excludingthecostofcentering,shuttering, finishing and reinforcement All work up to plinth level 1:1.5:3 (1 cement 1:5 coarse sand (zone III): 3 graded stone aggregate 20 mm nominial size) |
| 5 | Structuralsteelworkriveted,bolted unweldedin builtup sections,trussesandframedwork,includingcuttinghoisting fixing in position and applying a priming coat of approved steel primer all complete |
| 6 | ProvidingandFixingprecoatedgalvanisedironprofilesheets (size, shape and pitch of corrugation approved by Engineer-in- chargel)0.50mm(+0.05%)totalcoatedthicknesswithzinc coating120gramspersqmasperIS:277,in240mpasteel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guardfilmof25micronsminimumtoavoidscratchesduring transportation andshouldbe suppliedin single length upto 12 metreorasdesiredby Engineerincharge.Thesheetshall be fixed using self drilling /self tapping screw of size 5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurvedsurfaces,excludingthecostofpurlins,raftersand trusses and including cuting to size and shape wherever required. |
| 7 | Providing and fixing ISI marked oxidized M.S handles conformingtoIS:4992withnecessaryscrewsetc.complete 125 mm |
| 8 | ProvidingandfixingISImarkedoxidisedM.S.aldropswithnuts and screws etc complete: 250x16 mm |
| 9 | Paintingwithsyntheticenamelpaintofapprovedbrandan manufacture to give an even shade Two or more coats on new Work |
| 10 | Providing and fixing ISI marked MS pressed butt hinges bright finished with necessary screw etc. complete 125x65x2.12mm |
| 11 | Supplying filling, spreading & leveling gravels of size range 5 mmto10mm.intherechargepit,overtheexistinglayerof boulders, in required thickness, for all leads & lifts, all complete as per direction |
| 12 | Providing and fixing crimped with Gl. mesh and size 20 mm X 20mm10guagetoironangleframeincludingweldingcrimp meshtoangleframeandsteelflat,fixingtheframeinits original position andoil painting etc complete (excluding cost of structural steel) |
| 13 | Providing andfixing PVCRain watesof Pipeof110mm outer diameterandhaving wall thickness of 2:22.7mm confiming to IS:13592-1992includingproperrainwaterreceivingracess withPVCplugbendneccesaryfittingssuchasoffsets,shoes including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approvedquality andnumberfilling the joints using rubber gasketwithsolventcementsandproperlyrestingtheshoeof pipesonCCormachinarymasonrylocksincludingnecessary scaffoldingandmaintenancefor3yrsforanyleakagesor dislocationsofpipes.AllthePVCfittingsandadditional2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 14 | Cable connection from the main source to shed with 35 sqm 3.5 core 50metre length wire all connection with GI Pipe by rooting insidetheearthcompleteinallrespect.Incomer&Outputof cable will be terminated with 100 Ampere 3 phase main switch at both ends, alongwith looping wire of require size |
