|
| 1 | Civil Work |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Item No 21.02 |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto a distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, watering including shoring andstrutting etc.complete.(Liftfrom 1.5to 3.0m)By Manual MeansItem No 21.07 |
| 4 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)Item No 24.01 |
| 5 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Item No 25.13 |
| 6 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Item No 25.33 |
| 7 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)Item No 25.52 |
| 8 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade)Item No 26.07 |
| 9 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Item No 25.72 |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Item No 26.33 |
| 11 | Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete. Item No 21.38 |
| 12 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineerincharge inlayersof15cm to20cmincludingwateringandcompactionetc.complete. Item No 21.37 |
| 13 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete. Item No 27.01 |
| 14 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. Item No 27.03 |
| 15 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.Item No 32.01 |
| 16 | Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:5without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. completeItem No 32.06 |
| 17 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. Item No 32.11 |
| 18 | ProvidingandlayinginsitucementconcreteM30withtremixtreatmentfor200mm thicknessforflooringwithgroovecuttingof4mmwideand20mmdeepwithnecessary refilling with bitumenetc. complete. Item No 33.31 |
| 19 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.Item No 36.03 |
| 20 | Providing and applying washable oil-bound distemper of approvedcolour andshade to old andnewsurfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Item No 36.11 |
| 21 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,of approved quality etc. complete. Item No 39.68 |
| 22 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) Item No 39.24 |
| 23 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. Item No 2.26 |
| 24 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surfaceofplinthfillingattherateof5litresofemulsionconcentrateat1.0percentof clorophyrifosperOne Square Metre of surface area covering ten years guarantee on bond paper. Item No 21.24 |
| 25 | Providing and fixing self supporting steel roofing systemfor a Godown or alike made up of structural grade steel sheet of 912 millimeter width ( tolerance +/- 2 millimeter ), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 15.30 meter having arch rise as 3.06 meter, arch length 17.75 meter. The base material made up of importedgalvalume steelcomplying to ASTM A792having base metal thickness of 0.80 millimeter ( tolerace + / - 0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster , top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of 2 millimeter thick polycarbonate sheet of size 2\" x 7\" and turbo ventilator of 24\"\" diameter to be installed at every 30 feet along the length of roof including finishing, testing and cleaning etc. complete. Item No 38.41 |
| 26 | PEB |
| 27 | Supplying, fabricating, erecting and fixing in position of steel structure at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS 2062-2006 Rates shall include cost of cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded/bolted structural steel work in columns, beams, trusses, purlins, platforms, ladders monorails, staircase, supports, strengthening of steel member etc at site to line and level supply of approved bolts/nuts/washers etc complete as per drawings including painting as per G4/G5/G6 before erection and all materials amd lanour charges rtc. complete and including sand blasting & painting with 1 coat or enarnel paint (berger EPILUX SG -HH) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer 35-50 micron etc complete as shown in drawings, as per specifications and as directed by engineer in charge / construction manager. (the rate quoted shall include cost of bolts, nuts, washers, welding and electrodes required for the complete work) Item No PEB1 |
| 28 | Supplying, fabricating, erectingof cold formed light gauge structural steel members cobforming to IS 801/IS 811 hot-dip galvanisede to IS 4759-96 including cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position item No PEB 2 |
| 29 | Supply & fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer with all necessary accessoriesItem No PEB3 |
| 30 | Supply & fixing of PPGI roof accessoriesof 0.5 mm thick as shown in drawing or as directed by engineer Item No PEB4 |
| 31 | Supplying, fabricating and erectingin position PPGI Eaves Gutter of rquired size with stop end all fixing accessories, drop ends, etc at all elevations level & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc, conforming to latest specifications including cutting, straightening, welding, bending to shapes, bolting etccomplete as shown in drawings as per specifications and as directed by engineer in charge Item PEB5 |
| 32 | providing and fixing of the rain water down take pipes of PPGI , the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimeter of roof area drainded. No spout shall be less than 80 mm in diameter. the spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc, complete as shown in drawing as per specifications and as directed by the engineer in charge Item No PEB6 |
| 33 | Supply & fixing of 2mm thk polycarbonate sheet as per drawing & as directed by engineer in charge Item No PEB 6 |
| 34 | Providing & fixing wind oppareted tarbo s. s. ventiletar (24 inch dia.) over exsiting roof including cutting of sheet, propar fixing in position to true line & level with all fixtures @ fasting, providind 0.8mm thick FRP sheet for covering area between roof and fan so as to provide waterproof joints with approved waterproofing compound makingthe roof surface including cleanin etc. (as directed by Engineer in charge) (jalgaon DSR 304/123) ItemNo PEB8 (38.53) |
| 35 | ELECTRIFICATION |
| 36 | Supplying,erecting&terminating XLPEarmouredcable3 core6sq.mm.copperconductorcontinuous 5.48sq.mm.(12SWG)G.1.earth wire complete erected with glands & lugs, on wall trusses/ pole or laid in providedtrench/pipeasperp«irin»tin.run rR IT/ml I |
| 37 | Making trench of suitablewidth and depthinhardmurum/tarroadfor layingprovidedLTcableup to and including 16 sq. mm complete as per specification no. CW-EXN-CTR |
| 38 | Makingtrench of suitable width and depth in soft soil for laying provided LTcableuptoandincluding16 sq.mm completeas per specification no. CW- EXN-CTR |
| 39 | SupplyingfierectingmainsPVC unarmouredcable1100Volt grade ISI mark 3 core f 2.5 sqmm stranded / solidcoppercomplete . erected on wallwithdulypaintedG.I. Saddle @ 0.25 m C/C&rigidlygroutedin thewallwiththehelp of plated |
| 40 | Supplying & erecting weatherproof powder coated distributionboard4waywith2x 6/10 Amp S. P. M. C. B. with industrialtwopinplugsocket10A and3pinplugtop10Awithtop covernecessaryconnectionetccnnanletewitho nnrnuerimv ke |
| 41 | Providing point wiring for street light with PVC unarmoured cable l l 00VoltgradeISImark3 core1.5 sqmtn stranded/ solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly groutedinthewallwiththehelpof plated screwincluding4” x 4” M. S. box2waywithepoxypainting& inside10 ampNylonconnectorstrip for streetlightconnectionand flexiblecableof2mtrs.forstreet light connection etc. complete as directedby Engineerin charge. |
| 42 | Supplying & erecting10- l2W, 230V integraltypeLEDLampsuitablefor B-22/E-27base. |
| 43 | SupplyinganderectingLliDStreet lightfittingsuitablefor20to25W, with PF > 0.95 class IP 65 and above Housingofpressurediecast alluminiumalloy andheat sink extrudedalluminiumwithstreet light bracketcompleteas per specification No.FG-ODF/FLS-2. |
| 44 | Providingearthing withgalvanized iron earthplate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specificationno. EA-EP |
| 45 | Providing pipe typeearthingwith 40mm.dia.G.l.pipeor20mmdia. G.1.Rodcompletewithallmaterials as per specificationno. EA-EPEach |
| 46 | Supplying&erectingand marking miniaturecircuitbreakerofdouble pole32Ain provided CRCAsheet metaldistribution board with requiredwiringconnections&lugsetc |
| 47 | Supplying,crccting&marking SPMCB6Ato32A,B-series(for lighting) in provideddistribution boardasperspecificationno.SWSWR/MCB |
| 48 | SupplyinganderectingGIsheet1.6 mm ( 1 6S\\ G)tobeused for fabrication cf boxes panel boards etc.includinecutting,bcnding, drilling, welding, rivetingetc.and painting with onecoatofi redlead paint and 2 coats of enamelpa int. |
| 49 | Supplyingand erectingiiiarine plywood 18/19 mm thickfixed to wall or on providedpanelboardwith necessarymaterialssuchasscrews. wallfastener›. supports, nut bolts etc. cornnlete |
| 50 | Supplying and erectingtriplepole andneutral distribution board (TPNDB) surface/ flush mounted suitableforSPMCBof1 2wayson iron/GIframe(horizontal busbar type)as pcr spccification no. S\V-$W R/MCR DR |
| 51 | Supplying& erecting G.1.pipe ‘A’ class25 mmdia.erectedfor enclosingXLPEarmouredcable on wall/poleas perspecification no.CB-CE |
| 52 | Supplying &erecting40mmdia. G.I.Pipe\"A” grade ISImarkfor enclosingarmouredcable onwallor pole with clamps and upper end closed withT.W. bush & sealedwith coiunound |
| 53 | Supplyingandlaying (including excavationof suitablew idth& depth upto90cm)75mm outsidedia. double wallcorrugated pipes (D\\\"C) of HDPEfor enclosingcablebelow ground/roadsurface, to required denthcnmn lele |
| 54 | Supplying& erecting18 guageM.S.Box powder coated (4\"x4\") 3 way for mains conncction |
| 55 | Supplying&erectingSiemenstype brasscableglandsfor3to4core6 sq.mm./2to4 core10 sq.mm.for XLPEarmouredcableasper soecilicationNoCB-GL |
| 56 | Supplyingshockproof type hand lampwithlampholder,bulb/lamp 100Wguardedglassarid30 intr.3 corePVCflcxible cord with hand shield tvne 3 oin 6 AnnoPlue ton |
| 57 | Point wiringfor independent plug withlsl mark2-1.00sqmmcopper PVCinsulatedwire1 . 1KVgradein PVCtninking(PVCcasingN capping) doublelocking arrangement withgrooves,trunkingofnotbelow 12.5mminwidthandthethickness notbelow1.2mmasperB.S.4678 part—4of1982andwithaccessories of PVC/Virgin polypropylene not below 1.8 mm in thickness, duly cmbossedthe name of the manufactureroncasing,cappingand on accessoriesduly sealed at joints & erected the trunking (casing- ncapping)onwall/ceilingwith necessary nettle folded G.[.screws etc.fixedat anintervalofnotmore than500mmwithRawlplugsetc. and ISI mark cciling rose/Batten holder/slanting holder erected on PVC /Virgin polypropylene accessories with lSImark 3pin 6 Amp procelainbase socketprocelain base6A.T.switch/piano switch/bell push ei ected on polished doubleT.W.foldedorscrewcdboardwith top of either teakwoodorplywood pastedwith sunniicawithbrass screws complete. |
| 58 | Pointwiring withISImark 2-1.00Sq. mm1.1KvgradePVCinsulated& PVC sheathed/ PVCinsulated copperwireonthelightorthefan boardwith1 .5 sqmmISI markPVC insulatedcopper wire in green colour usedfor carthingforplugcomplete with3pin6AmpprocelainbaseT switch / flush type switch 6 A both or ISI mark (Earth wire to be taken from DP /DB or intermediate switch board) |
| 59 | ItemNo(23) :-Powerpointwiring forgeascr / Refrigerator with ISI mark2x2.50Sq.mmcopperPVC insulatedwirel.I KVgradein PVC casing-caping withdouble locking arrangement with l x1.00Sq.mm copperPVCinsulatedwirefor earthing on wall / ceiling with necessaryG.I.screwsetc.fixedatan internal of not morethan500mm withRaw1 plugs etc. with ISI Mark6 pin 16A combined switch-socket erected on sunmicaboard. |
| 60 | Supplying& erecting mainswith 2 x2.5 Sq.min stranded copper PVC insulatedwirewith2x1.5 Sq.mm copperPVCwireinPVCcasing- canine20 mm on wall / ceiline |
| 61 | Supplying&erectingmainwith2x4.00Sq.miv stranded copperPVC insulatedwirewith2x1.5 Sq.mm copperPVCwireinPVCcasing- canineon wall / ceiling |
| 62 | Supplyinganderectingdoublepole switch surface type/ flush type 240V, 32Awithindicatorlamp&fuseas per specification no. SW-SWR |
| 63 | Providing&erecting double pole metal/ironcladswitchwithH.C. typefuseandneutrallink250V32 Aapproved make erected on wall |
| 64 | Supplying & erecting 3W, 230V integraltype LED Lamp suitable for B-22/E-27 base. |
| 65 | Supplying anderectingT8 Fluorescenttubedaylight1200mm 36 watts. |
| 66 | Supplyingandfixing wiremesh(Jali) cover suitablcforfitting/fanorfor any purpose, comPlete with necessary materials.Thejalicover shall bemade from goodquality G.l.w\"iremesh sizc25x25(mm) andmadeup of14SWGG.I.wire win13IIf}r•/ sI I rt nnrti D O |
| 67 | Supplying &erectingStreet light bracket forerection ofside entry flourescent fitting/C.F.Lfitting/ sodium vapour fitting made from 25mm dia \"B\" class G.l. Pipe, 1.2 mtr. inlengthweldedtopolecap4mm thick30cms.inlcnghtofsuitablc diameterontopofthepolewilt15 cms.weldedcornersupportof suitablesizeofM.S.sheet3mm thickcompleteerectedwith6mm dia. set screws duly paintedwith one coatofaluminium paint complete erectedwith provided leads complete. |
| 68 | Supplying&erectingCRCAsheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete. |
| 69 | Supplying,erecting&markingFour poleisolatorsonly switchversionof miniature circuit breakers of 40 Amps. In provided distributionboard. |
| 70 | Royalty |
| 71 | sand |
| 72 | other minrals |
| 73 | LAB TEST |
| 74 | BASIC TEST OF CEMENT. |
| 75 | Standard Consistancy,Fineness, Specific Gravity,Setting Time ( Initial & Final ), CompressiveStrength, Soundness. |
| 76 | BASIC TEST OF AGGREGATE. |
| 77 | Water Absorption, Specific Gravity,Impact Value, Crushing Value. |
| 78 | Sieve Analysis. |
| 79 | Abrasion Value. |
| 80 | Flakiness Index & Elongation Index. |
| 81 | MIX DESIGN. M25 |
| 82 | Concrete Mix Design (With all Tests onbasic materials) |
| 83 | BRICKS |
| 84 | Water Absorption (Set of 5 Bricks), CompressiveStrength( Set of 5 Bricks), Efflorescence(Set of 5 Bricks). |
| 85 | CONCRETE |
| 86 | Compressive Strength OF C.C. Cube (Set of 3 cubes). |
| 87 | Fineness Modulus ( Sieve Analysis ),Silt & Clay Content |
| 88 | MURUM |
| 89 | Sieve Analysis. |
| 90 | Liquid limit & plastic Limit. |
| 91 | Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct |
