}

Tender For Rev. Estt For Ps To 1 No 66 Kw Ev Charging Station At Major Nanke Pump By Iocl Under Tt Nagar Zone Of City Division South Bhopal - H-Beams 152 X 152 Mm., 37.1 Kg./Mtr.-13 Mtr. Long = 482.3 Kg 2 Aaac Rabbit Conductor 0.05 Sq. Inch. (55 Sq.Mm, bhopal-Madhya Pradesh

Tender Notice

51908901
Tender For Rev. Estt For Ps To 1 No 66 Kw Ev Charging Station At Major Nanke Pump By Iocl Under Tt Nagar Zone Of City Division South Bhopal - H-Beams 152 X 152 Mm., 37.1 Kg./Mtr.-13 Mtr. Long = 482.3 Kg 2 Aaac Rabbit Conductor 0.05 Sq. Inch. (55 Sq.Mm
Tender
Indian
Madhya Pradesh
Bhopal
23-10-2025

Tender Details

Tender For Rev. Estt For Ps To 1 No 66 Kw Ev Charging Station At Major Nanke Pump By Iocl Under Tt Nagar Zone Of City Division South Bhopal - H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-13 mtr. Long = 482.3 kg 2 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 3 XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts 4 XLPE Cable 1 core unarmoured 300 sqmm Aluminium conductor 1100 Volts 5 BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 200 KVA Distribution Transformer 6 11 KV(45KN) Composite Polymer Disc Insulators 7 11 KV AB Switch Polymer type 400 Amp with Complete fitting 8 11 KV Strain hardware (T&C type) fittings 9 11 KV D.O. Fuse Unit Polymer type 10 9 KV Gapless type ( 5KA) Polymer for DTR 11 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 12 Three phase CT operated Smart Meter with Box for consumer and DTR (-/5 A) 13 Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels 14 Transformer mounting Channel (100X50x6 mm.) 15 Bi-metallic clamps Distribution Transformers Bushing 16 Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC 17 D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel 18 D.O.Mounting Channel 75x40x6mm 19 Danger Boards Enamelled 11 KV 20 Complete jumpering of DTR 21 LT distribution box with 1.2 mm thick MS powder coated sheet, 315 A MCB on incoming & 6 no. 250 A HRC fuse base including 200 A HRC fuse , For 200 KVA Transformer 22 LT ring type CT 300/5 A 23 G.I. STRIP 25X3 MM1 24 G.I.Pipe 40 mm Dia C grade type 25 Galvanized nut & bolt with washer 26 Bentonite compound powder 27 Red oxide paint 28 Aluminium paint 29 M.S.Nuts with Bolts 30 STAY WIRE 7/3.15 MM.(7/10 SWG) 31 Stay set complete without Stay wire 16 mm. (Painted) 32 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 33 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 34 Concreting of structures & foundation (1:3:6) 35 Stone Block/Pre cast block for base pedding(450X450X75MM) 36 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 37 DTR S/s fencing (37 feet) of 6 with on MS Angle(50x50x6mm) 7No, 7Height 38 Double Gate (2No-2.5x5x) set of MS angle (25x25x4mm) with mesh & locking 39 Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the itemslike V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. 40 Transportation Charges for All Equipments & Materialsfrom area store to site & Site to Area store Bhopal

Key Value

Document Fees
INR 236 /-
Tender Value
INR 1.38 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail