Tender For Construction Of Boys Toilet At Govt.Middle School Kharooni Zone Harni Division Mendhar Under Pab 2018-19. Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 3 Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) . 4 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in oundation and plinth including curing in :Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars 7 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete 8 Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. 9 Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide 10 6MM CEMENT PLASTER6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 11 12mm Cement plaster of mix: ( 1 cement : 6 fine sand) 12 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) 13 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approvedsteel primer.1 Using M.S. angles 40x40x6mm for diagonal braces 14 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinthlevelwith:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 15 Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level. 16 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 17 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work 18 Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including thinnable priming coat to give an even shade 19 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 20 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore 21 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:20 mm dia. nominal bore 22 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 23 Providing andLaying in Position flow trap including all fittings ,complete jobs. 24 Special surface finishing to treads, risers and the ends of concrete steps and the like, including form work 25 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 26 Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessarymaterials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm 27 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. 28 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required 29 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 30 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 31 Providing and fixing PVC Waste pipe for sink or wash basin including PVC waste fitting complete Flexible pipe 32mm dia. 32 Providing and fixing ball valve (brass) of approved quality,high or low pressure ,with plastic floats complete 20mm nominal bore. 33 Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete 20 mm nominal bore. 34 Providing and fixing PVC pipe at the weight of 4kg /sqm finolex /supreme 110mm diameter. 35 Providing and fixing PVC pipe at the weight of 4kg /sqm finolex /supreme 75mm diameter. 36 Providing and fixing electric points as per necessity at site. 37 Carriage of material by mechanical transport including loading/unloading and stacking complete sand lead upto 60 kms avg 38 Carriage of material by mechanical transport including loading/unloading and stacking complete sand lead upto 20 kms avg. 39 Carriage of material by mechanical transport including loading/unloading and stacking complete Brick lead upto 145 kms avg 40 Carriage of material by mechanical transport including loading/unloading and stacking complete Sand lead upto 100 Mtr avg 41 Carriage of material by mechanical transport including loading/unloading and stacking complete Sand lead upto 100 Mtr avg 42 Carriage of material by mechanical transport including loading/unloading and stacking complete.Brick lead upto 100 mtrs avg Please Enable Macros to View BoQ information
