Providing, Laying, Spreading And Compacting Graded Stone Aggregate (Size Range 53Mm To 0.075 Mm) To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant, Transporting The Mix Material By Mechanical Trans, anantnag-Jammu And Kashmir

Tender For Macadamization Of Inner Roads Of Bondialgam [Adv. Cost ?60.00 Lacs (? 50.85 Lacs Exclusive Of Gst + Gst@18% ? 9.15 Lacs)] Providing, laying, spreading and compacting graded stone aggregate (size range 53mm to 0.075 mm) to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, transporting the mix material by mechanical transport from the plant upto the site of work, laying the mixed material in uniform layers with mechanical paver finisher on well prepared surface and compacting the same with vibratory roller of 8 to 10 tonne capacity to achieve the desired density / compaction as per specifications and directions of Engineer Incharge, including cost and carriage of all materials, hire charges of machinery, all taxes etc complete. 2 Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom On W.B.M. /W.M.M. @ 0.4 Kg/sqm 3 Providing and laying 50mm thick Bituminous macadam base course with stone aggregate of quarry, size and grading as specified in CPWD specifications and bitumen of grade VG 10 @ 3.3% by weight of total mix including hot mixing of stone aggregate and bitumen in Hot mix plant, transporting the mixed material from plant upto site of work and laying the mixed material with paver finisher to the required level and grade, rolling with road roller of 8 to 10 tonne capacity to achieve the required compaction and density including cost and carriage of all the materials, hire charges of machinery, all taxes etc complete 4 Providing and Laying of 25mm thick (compacted) semi dense bituminous concrete surface using crushed stone aggregate of specified grading as per specification and bitumen of grade VG 10 @ 5% by weight of total mix including hot mixing of the stone aggregate and bitumen in hot mix plant, transporting the mixed material from plant site by mechanical transport upto the site of work, laying the mixed material with paver finisher to required level and grade and rolling with road roller as per MORTH specification to achieve the desired compaction / density including cost and carriage of the all materials, hire charges of machinery, all taxes etc complete 5 Providing and laying seal coat 6mm thick of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of V G 10 grade bitumen per cum of fine aggregate (0.768 Kg of bitumen per sqm) and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller complete job 6 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm 7 P/L of RCC spun pipe 450 mm dia complete job Please Enable Macros to View BoQ information

INR 1600 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB