Tggenco-Ytps(5X800mw)-Supply Of Testing And Measuring Instruments For Em/Stage-I/Chp Division Of Ytps.-1 DIGITAL MOTOR CHECKER EMC-38C,Make: MCM Technical Specifications:A) INSULATION RESISTANCE(IR): 0#500 Mohm at 500 V DC ± ( 2% + 1digit),0.1 Mohm resolution 0#2000 Mohm at 1000 V DC ± ( 2% + 1digit), 0.1 Mohm resolution with DC selection switch B) RESISTANCE : RANGE RESOLUTION 0-200 milli ohm 0.10 milli ohm,0#2 ohm 0.001 ohm,0#20 ohm 0.01 ohm, 0#200 ohm 0.10 ohm C ) INDUCTANCE:RANGE RESOLUTION 0#2 mH 0.001 mH,0#20 mH 0.01 mH,0#200 mH 0.1 mH,0#2000 mH 1 mH * Display:3½ digit LCD display, * Temp.Range:0- 55ºC *, Rechargeable Battery Pack with charger, Battery low indication, shock proof rubber casing Standard supply: Test leads, Shoulder strap, Test & Calibration report with warranty/guarantee certificate,Manual & Carry case. 2 DIGITAL MULTI METER, MAKE: FLUKE, MODEL: 17B+, voltage AC(0 TO 1000V) And DC (0 TO 1000V), Frequency 10HZ to 100HZ Resistance 0-40 Mohm ,ACCURACY 0.5 % to 1.5% , Display( LCD) 4000 counts ,Battery Type AA, Neda 15A IP40 3 LEAKAGE CURRENT CLAMPMETER AC, Range:0- 200A, Resolution 0.01mA, MAKE: kyoritsu, Model:2431 Included Accessories 9090 (Carrying Case) Instruction Manual, Calibration Certificate. 4 TACHOMETER,DIGITAL;SPEED RANGE:9999/99999 RPM;MODEL:V Speed Measurement Range: 1) up to 99999 r/min ,Accuracy: ±1 digit for laser measurement 2) 2 to 20000 r/min, Accuracy ±1 digit for using contact adapters Measuring distance: 50 to 500 mm (1.9 to 19.7 in.),Angle of operation ±45(#) Operating temperature 0 to 50 °C (32 to 122 °F) MAKE: FLUKE; MODEL: 931 5 ANALOG PHASE SEQUENCE INDICATOR, Range:100 TO 500 V,25 T0 65 HZ MODEL: PSI-1, MAKE: CIE 6 NOISE LEVEL METER Integrating SLM Measurement range : 30 - 130dB; Accuracy: 23 +/- 5 ; Resoultion: 0.1dB, Operating Temp: 0 deg c to 50 deg c,operating Humidity : <85 % RH Digital sound level meter model: KM 8080 MK-1 7 LUX METER:MAKE: FLUKE 941 LUX DIGITAL MULTIMETER (YELLOW 8000 COUNTS) RANGE: LUX 20,200,2000,20000FC (FOOT CANDLE), PRECISION: 30±2%, 60 °±6%, 80±25%, COSINE ANGLE CORRECTED ACCORDING TO THE GRADE A GENERAL SPECIFICATIONS OF JIS C 1609:1993 AND CNS 5119 A,±3%, ±6% OTHER VISIBLE LIGHT SOURCES COSINE ERROR.SAMPLING RATE: 2.5 TIMES/SECOND FOR THE DIGITAL DISPLAY 8 DIGITAL EARTH RESISTANCE TESTER WITH RESISTIVITY TEST FACILITY,EARTH,MAKE: EXTECH INSTRUMENTS 382252 MESURING FUNCTIONS: 2 AND 3 POLE, RESISTANCE MESURING RANGE: 20 OHMS, 200 OHMS, 2000 OHMS,RESISTANCE MESUREMENT FREQUENCY: 820 HZ, AUTOMATIC ZERO ADJUSTMENT, AUTO POWER OFF,TEST CURRENT/FREQUENCY: <2.5MA/820HZ, DC VOLTAGE 0 TO 1000V 1 NO 9 PORTABLE AUTO-TRANSFORMER, INPUT: 240V AC,50HZ, 1PHASE, OUTPUT: 0-280V AC, MAX. CURRENT RATING: 24AMPS,CONTINUOUS CURRENT RATING: 20AMPS, OPERATING TEMP : 0° - 50°C, AIR-COOLED, MANUAL TYPE, CONFORMS TO : I.S. 5142,PORTABLE WITH SHEET STEEL ENCLOSURE FOR FLOOR / TABLE MOUNTING.1 SET OF SPARE CARBON BRUSHES SHALL BE SUPPLIED 1 NO 10 FLUKE TRUE RMS AC/DC DIGITAL CLAMP METER WITH IFLEX PROBE AND FLUKE CONNECT MODEL NO:376 INCLUDING ALL ACCESSORIES 18-INCH IFLEX PROBE, TEST LEADS,SOFT CASE,USER MANUAL, CALIBRATION CERTIFICATE, TEST CERTIFICATES.
