Tender For Test And Measurement Equipment; 1 Bandwidth 100 MHz on all channels or better & Field upgradable to 500 MHZ 2 No of Channels 4 Analog Channels 3 Digital Channel Maximum 16 channel 4 Pattern Generator 4-bit Pattern Generator 5 Signal Source 50 MHz Arbitrary Function generator inbuilt 6 Sampling Rate 1 GS/s on each channel simultaneously and Max 2.5 GS/s on half channels 7 Record Length Min. 10M on each channel simultaneously 8 Vertical Resolution 8 Bits & up to 16 Bits with high resolution mode or better 9 Input Sensitivity range 1 mV/div to 10 V/div max. 10 DC Gain accuracy ±3.0 % step gain 11 Max Input Voltage 300 VRMS Installation Category II 12 Input Coupling DC, AC 13 Vertical Zoom Vertically expand or compress a live or stopped waveform 14 Acquisition Mode Sample, Peak Detect, High Resolution, Faster Acquisition, Envelope, Averaging 15 Time Base range 2 ns/div to 1000 s/div on all channels & 1 ns/div to 1000 s/div on half channels 16 Horizontal zoom Horizontally expand or compress a live or stopped waveform 17 De-skew range -95 ns to +95 ns 18 Trigger Modes Auto, Normal single sequence 19 Trigger Type Edge, pulse width, runt, timeout, logic, setup & hold, rise/ fall time, and parallel bus 20 Serial Trigger Decode & Analysis System should have facility for Serial bus decode like I2C, SPI, RS-232/422/485/UART, CAN, CAN FD 21 Trigger Coupling DC, Noise Reject, High Frequency Reject, Low Frequency Reject 22 Waveform measurement 36 measurement types include Amplitude, Time, Gating & cursor measurements with N number measurements in result table displayed simultaneously along with the waveform signal 23 Advanced Measurement Arithmetic (Add, Subtract, and Multiply waveforms) Mask Testing & Act on Event should have inbuilt in scope 24 FFT Dual window FFT with simultaneous time and frequency domain in the same screen, Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Henning, or BlackmanHarris, cursor Measurement should be available for FFT measurements. 25 Display 10.1 Inch LCD capacitive touch display, LAN Port, USB ports, VGA, instrument should provide cloud drive connectivity to store & recall the waveforms remotely 26 Input Output Ports USB 2.0 Host Port, USB 2.0 device port 27 Remote control VNC compatible to remotely control and view the screen on the instrument 28 Standard Accessories Compatible 100MHz Passive probes per Channels with better than 4pF loading
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.