Tender For Supply, Installation, Testing And Commissioning Of Workshop Equipment For The Project Administrative And Logistic Infrastructure Including Schools, Hospitals, Auditorium And Sports Facilities At Aob (Rambilli)

Sharing tender

Supply, Installation, Testing And Commissioning Of Workshop Equipment For The Project Administrative And Logistic Infrastructure Including Schools, Hospitals, Auditorium And Sports Facilities At Aob (Rambilli); (a) Universal Milling machine Nos 1 (b) Radial drilling machine Nos 1 (c) High precision surface grinding machine Nos 1 (d) Pedestal grinder Nos 2 (e) Universal Tool and Cutter grinder machine Nos 1 (f) Hydraulic hacksaw machine Nos 2 (g) Borescope Nos 2 (a) Conformity to standards for Horizontal /Universal Knee Type Milling Machine : As per IS 6893 part 2 (b) Conformity to standards for Milling Arbor : As per IS 8614 latest (c) Conformity to standards for Mechanical Guarding : As per IS 9474 latest (d) Conformity to standards for Geometrical and Practical Accuracy : As per IS 2200 latest (e) Conformity to standards for Geometrical Accuracy test for inspection of the machine : As per IS: 2201 -1993 (f) Conformity to standards for machine : As per IS: 210-1993 (g) Type of Milling : Universal Milling (h) Mechanism : Manually Operated (j) Nature of Operation : Heavy Duty (k) Table total area (length x width)(mm x mm) : 2060 x 300 (approx.) (l) Table clamping area (length x width)(mm x mm) : 1600 X300 (approx.) (m) Width of T slots : 16 millimeter (n) Number of T slots : 3 (p) Centre distance between T slots : 63 millimeter (q) Table transverse : Manual & Automatic (r) Longitudinal table transverse : 950 millimeter (approx.) (s) Cross table transverse : 320 millimeter (approx.) (t) Vertical transverse : 375 millimeter (approx.) (u) Swivel of table to either side of horizontal plane : 45 degrees (v) Maximum Safe Load on table : 400 kilogram (approx.) (w) Number of spindle speed : 18 (x) Spindle speed range in rev/min : 35.5 – 1800 (approx.) (y) Spindle front bearing diameter : 96 millimeter (approx.) (z) Type and size of spindle nose : As per ISO 50 (aa) Number of feeds available : 24 (ab) Feed range for longitudinal in mm/min : 4-800 (approx.) (ac) Feed range for transverse in mm/min : 4-800 (approx.) (ad) Feed range for vertical in mm/min : 1.6 -320 (approx.) (ae) Rapid transverse feed range for longitudinal & cross in mm/min : 2000 (approx.) (af) Rapid transverse feed range for vertical in mm/min : 800 (approx.) (ag) Max feed force in KN : 44.12 (approx.) (ah) Required Floor Space in mm x mm : 3447 X 2530 X 2087 (approx.) (ai) ISO Compliance for Milling Machine : ISO 50 for Heavy Duty Milling Machine (aj) Size of milling arbor : As per ISO 50 for Heavy Duty Milling Machine (ak) Power supply (V, Ph , Hz) : 415VAC,3PHASE,50Hz (al) Spindle motor power in kw : 7.5 kilowatt (approx.) (am) Spindle motor rpm : 1500 (an) Feed motor power in kw : 3.7 kilowatt (approx.) (ao) Feed motor rpm : 3000 (approx.) (ap) Coolant pump motor in kw : 0.11 kilowatt (approx.) (aq) Coolant pump motor in rpm : 1200 (ar) Weight of the machine : 3700 kilogram (approx.) (as) Size of the machine (L x W x H ) (mm) : 2600X2450X2295 (approx.) (at) Noise level emitted by machine as per is 10988 latest in db : 85 (approx.) .... more in document