Tender For Addition Alteration To Bldg No Sm-11 At Patiala Under Ge South Patiala, patiala-Punjab

Tender For Addition Alteration To Bldg No Sm-11 At Patiala Under Ge South Patiala; 1 Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and as directed. 2 Demolition of mud phuska on roof any thickness including plastering and leeping plaster( whether full thickness removed or part thereof) complete all as specified and as directed. 3 Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed. 4 Material and labour for cement concrete 1:3:6, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100complete all as specified and as directed. 5 Material and labour for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. 6 Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) and applying bitumen 85/25 grade @ 0.1.20kg/sqm over and including 0.30 kg/sqm bitumen primer and landed APP membrane on surface by Torch application complete all as specified and as directed. 7 Material and labour for roof Tiles with SRI>90 premium quality tiles of approved shade 300 X 300 mm and 10 mm thick, at roof tops/ terraces etc. in any pattern of light & dark tiles as approved, laid over & including 20 mm thick screed in cement mortar (1:4) over and jointed & pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved) complete all as specified and as directed.Make : Johnson (Cool Roof Tiles) / Orient (Cool Roof Tiles) 8 Material and labour for cement concrete1:2:4, type B-0 (using 12.5mm graded stone aggregates) as in roof kerbs, benching, mud stops, steps, coping, hold fasts and the like slightly rounded or chamfered on the edges complete all as specified and as directed. 9 Taking down eaves, gutters and rain water pipes (any sizes or pattern) including all fittings head, shoes, bend, swan neck etc and cleaning for refixing or removing to store complete all as specified and as directed. 10 Supply and fixing UPVC (SWR) Type ‘B’ , 160 mm nominal outside diameter confirming to IS : 13592-1992 single socketed in any length including jointing with lubricant/ PVC cement solvent as per manufacturer’s instruction”, fixed to walls with MS flat iron clamps of size 25 x 3mm, bolts, washers, nuts, nails etc, complete all as specified and as directed. Note: MS flat iron clamps will be measured and paid separately in respective item.Makes : Supreme/ Finolex/ Astral 11 Supply and fixing UPVC (SWR) bends, 160 mm dia confirming to IS : 14735-99 and jointing with lubricant/ PVC cement solvent as per manufacturer’s instruction”, complete all as specified and as directed.Makes : Supreme/ Finolex/ Astral 12 Supply and fixingMS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed 13 Demolition of reinforced cement concrete as in Roof slabs, floors slabs (other than ground floors), beams, roof beams, roof projections, chajjas, staircases, landing, chajjas, fins and similar suspended work( reinforcement cut as required to facilitate demolition) complete all as specified and as directed. 14 Material and labour forreinforced cement concreteM-25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajjas, fins, roof projections, staircase, steps, parapets and shelves and the like items all as specified and as directed 15 Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 16 All as per serial item no.15 here-in-before but5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and as directed 17 Material and labour for form work of flat surface rough finished surface of concrete to soffits of suspended slabs such as roof slabs, shelves not exc 200mm thick upto 10m height (Horizontal or sloping) complete all as specified and as directed. 18 Material and labour for form workto edges of concrete slabs exc 10 cm but not exc 20 cm thick forrough finished surface of concrete complete all as specified and as directed 19 Material and labour for form workto edges of concrete slabs exc 5 cm but not exc 20 cm thick 1forrough finished surface of concrete complete all as specified and as directed 20 Material and labour for form work work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc,flat surface vertical or to batter for rough finished surface of concrete complete all as specified and as directed 21 Material and labour for form work work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.flat surfacefor rough finished surface of concrete complete all as specified and as directed 22 Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed. 23 Material and labour for brick work with Fly ash bricks minimum class designation 100 straight or curved on plan exceeding 6m mean raidus bulit in cement mortar 1:6 complete all as specified and as directed 24 Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits/ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed. 25 Material and labour for rendering 15mm thick on fair faces of brick or concrete surface in cement mortar 1:4, mixed with liquid water proofing compoundas per manufacturers instructions, finishing surface even and fair w/o using extra Cement, complete all asspecified and as directed.Note: Liquid WPC will be measured and paid separately under respective item of this schedule. 26 Supply only integral liquid water proofing compound complete all as specified and directed. 27 Material and labour for rendering 10 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. 28 Material and labour for rendering 5 mm thick on fair faces of concrete surface as in ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and as directed. 29 Material and labour for complete removal of existing treatment on wall / roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding paper of appropriate grit to make suraface clean , free from dust, loose paint etc by skilled labour complete all as specified and as directed. Note: Sanding of suraface shall be done by mechanical sander with 1500-2700rpm, with internal dust extraction system for clean environment certified by paint manfacturer.Proper masking to be carried out before primer and paint application. 30 Material and labour for prepration of plastered surfaceof walls (external/internal surfaces) /ceilings / soffits etc and applyingwall care putty (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) using ready made wall care putty including sandingthe suface with suitable sand paper to achieve smooth surface for receiving painting etc complete all as specified and as directed.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. 31 Material and labour for prepration of puttied surfaceof walls (external surfaces) /ceilings / soffits etc and applyingapplying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade,@ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer using fully automatic airless spray machine having flow speed of min. 1 lit/minute and pressure of 3300psicomplete all as specified and as directed.Make of Exterior Wall Primer: Asian / Berger / Nerolac [Best Quality].Make of Exterior Emulsion: Asian (Apex) / Berger (WEATHER COAT) / Nerolac (Excel) . 32 Material and labour for prepration of puttied surfaceof walls (internal surfaces) /ceilings / soffits etc applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturerusing fully automatic airless spray machine having flow speed of minimum 1 ltr/minute and pressure of 3300PSI complete all as specified and directed.Make of Interior Wall Primer: Asian / Berger / Nerolac [Best Quality].Make of Interior Emulsion : Asian (Tractor Shyne)/ Berger (BISON Glow) / Nerolac (BEAUTY SHEEN) 33 Material and labour for prepration of puttied surfaceof walls (external/internal surfaces) /ceilings / soffits etc applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceilings surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturerusing fully automatic airless spray machine having flow speed of min. 1 ltr/minute and pressure of 3300PSI complete all as specified and directed.Notes: For serial. item No. 29 to 33.Work for periodical services shall include the following and the rates quoted by the bidders shall include the same:-(a) The work pretening to periodical services shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like Exterior emulsion paint , putty etc after approval of the GE.(b) The contactor shell upload with the documents under cover I Memorandumof understanding (MOU) as per formate given in annexure A after schedule A notes with atleast one of the manufacturers mentioned in the Contracts, failing which the bid shell be liable to be rejected. (c) Use of scaffolding, trestle, ladders, cradles etc necessary for execution of work, protective measures.(d) The removing of nails, making good holes, cracks etc.(e) Work in patches and in narrow/ width, bends, cornices , plasters etc and cutting in edge of line where necessary and issurance to theworker.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass , joinery , electric fittings , wirings etc drops and splashes of paint to be cleaned to the entire satisfaction of Engr-in-charge. (h) The items shell be got executed through authorised applicator of manufacturers that is Asian paint limited/Kansai Nerolac paint limited /Berger paint India limited or any other reputed manufacturer as approved by GE.Make of Interior Wall Primer: Asian / Berger / Nerolac [Best Quality].Make of Interior Emulsion : Asian (Tractor Shyne)/ Berger (BISON Glow) / Nerolac (BEAUTY SHEEN) 34 Dismantling, floor, hearth or wall tiling including cement motrar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed 35 Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and as directed. 36 Demolition of cement concrete ( unreinforced ) in ground floors and pavings n.exc 15cm thicknesscomplete all as specified and as directed. 37 Material and labour for cement cocnrete 1:2:4, type B-0(using12.5mm graded stone aggregate) as in sub-base,flooring,paving etc complete all as specified and as directed. 38 Material and labour for 100mm thick cement concrete 1:4:8type D-2 (using 40 mm graded stone aggregates) as in sub-bases, floos, paving etc complete all as specified and as directed. 39 Material and labour for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 7-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry laid over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed.Note : Dado/skirting should be flushed with the wall plastering. 40 Material and labour for Polished Glazed Vitrified Tiles (PGVT) joint free premium quality coloured tiles 600 X 1200 mm and 8-10 mm thick, as in skirting/dado etc. laid with 3-5mm spacers and grooves shall be filled with epoxy grout (Pidilite or equivalent) of approved matching colour. in any pattern of light & dark tiles as approved, laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) as per manufacturers instructions and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved), in floors etc. laid over & including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed.Note :The rates for labour and material for spacers/ grovers shall be deemed to be included in the quoted unit rates and nothing shall not be measured & paid separately on this account. 41 Material and labour for mat finish anti skid vitrified tile joint free premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc.laid over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. 42 Material and labour for mat finish anti skid ceramic tile joint free premium quality coloured tiles 300 X 300 mm and 6-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. 43 Material and labour for full Body Vitrifiedjoint free premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. laid over & including 20 mm thick screed in cement mortar (1:4)and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed. 44 Material and labour for Polished Glazed Vitrified Tiles (PGVT) joint free premium quality coloured tiles, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) as per manufacturers instructions and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved), in floors etc.laidover & including 20 mm thick screed in cement mortar (1:4) over complete all as specified and as directed. 45 Material and labour for Polished Glazed Vitrified Tiles (PGVT) joint free premium quality coloured tiles, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm and 8-10 mm thick, as in skirting/dado etc. in any pattern of light & dark tiles as approved, laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) as per manufacturers instructions and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved), in floors etc.laid over & including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed. 46 Material and labour for Polished Glazed Vitrified Tiles (PGVT) joint free premium quality coloured tiles 800 X 1600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) as per manufacturers instructions and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved), in floors etc. laid over & including 20 mm thick screed in cement mortar (1:4) complete all as specified and as directed. 47 Material and labour for Polished Glazed Vitrified Tiles (PGVT) joint free premium quality coloured tiles 800 X 1600 mm and 8-10 mm thick, as in skirting/dado etc. in any pattern of light & dark tiles as approved, laid and jointed in suitable adhesive (flexiset H-40 or equivalent as approved) as per manufacturers instructions and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved), in floors etc.laid over & including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed. 48 Material and labour for Machine cut kota stone slab (nearest to 58cmx58cm in size) as in flooring 20-25mm thick laid over and including 20-22 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 100mm wide border of Baroda Green Marble complete all as specified andas directed. 49 Material and labour for pre-polished Baroda Green marble, machine cut as in floorings/ shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry laid over & including screedof 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing including 100mm wide border of White Marble in flooring complete all as specified and asdirected. Note : Single piece shall be used in steps/cills/jambs/shelves. 50 Materaial and labourfor nano tiles 15mm thick of size 800x2400 mm of any shade as approved machine cut as in flooring shelves/steps/counter tops, set and jointed in cement slurry laid over & including15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive and including bull nose on exposed sides complete all as specified and as directed . Note : Single piece should be used in steps/cills/jambs/shelves. 51 Material and labour for Granite (Jet Black colour/shade-South Indian) of any type machine cut as in flooring, shelves/steps/counter tops, 18-20 mm thick, set and jointed in cement slurry laid over & including screedof 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing and bull nose on exposed sides/lengths complete all as specified . Note : Single piece should be used in steps/cills/jambs/shelves. 52 Material and labour for cement concrete (1:2:4) type B-1( using 20 mm graded stone aggregates), 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints and filling the same with polyureathene complete all as specified and as directed. 53 Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincluding cutting holes for inserting hold fast for new frame depthexceeding half but n,exc one brickand making good to disturbed surfaces complete all as specified and as directed. 54 Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm iincluding cutting holes for inserting hold fast for new frame depthexceeding half but n,exc one brickand making good to disturbed surfaces complete all as specified and as directed. 55 Supply and fixing factory made single extruded “Pre-laminated WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat with corner round with back grooves of size 100X62-65 mm”comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:(i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately. Make : Alstone / Century / Rajshree 56 supply and fixing factory made single extruded “Pre-laminated WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat with corner round with back grooves of size 150X62-65 mm” comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. Make : Alstone / Century / Rajshree 57 Material and labour for cement concrete (1:2:4) using 12.50 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats, hold fasts etc. complete all as specified and as directed. 58 “Supply and fixing factory made flush shutters 30mm thick minimum 5 ply and laminated on both faces with laminate of approved shade, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match and PVC tape to matching the shade of laminate on the edges complete all as specified and as directed.” 59 Supply and fixing 35mm thick glazed and skelton shutters of 2nd class hard wood for doors (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a);, kiln seasoned and chemically pressure treated complete all as specified and as directed. Note : Glass panes, wire cloth, etc.shall be measured and paid separately. 60 Material and labour for preparation of new wooden of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pinl primer complete all as specified and as directed. 61 Material and labour for preparation of new or previously untreated surfaces of steel and iron work of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed. 62 Supply and fixing powder coated Anodised aluminium frame ( minimum thickness of powder coating 50 mm) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. 63 Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed.Note: Glass and other filling material in panels shall be measured and paid for separately under respective items. 64 Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) rfor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed. 65 Supply and fixing powder coated (minimum thickness of powder coating 50 micron) anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified and as directed,. 66 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding Window with mesh shutter – (2-glass shutter and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (112 mm x 52 mm) x 2.20 mm for outer frames, (41 mm x 61 mm) x 2.20mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 61 mm) x 2.0 mm fitted with Vinyl Coated Fiber mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Window shall be provided with standard hardware & Single point locking system of touch Lock system. the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etccomplete all as specified and as directed. Make : Fenesta/NCL Zylos 67 Supply and fixing 5 mm thick clear toughened glass for glazing works etc fixed with aluminium beads/uPVC windows any size of pane complete all as specified and as directed 68 Supply and fixing 5mm thick frosted glass in ventilators/ windows/ doors fixed in any metal frame work/ aluminium / uPVC joinery all as specified and as directed. 69 Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 70 Supply and fixing 10mm toughned/tempered frosted glass as in showers/ hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required of any size fixed in position with suitable stainless steel 304 Grade all types patch fittings / brackets / catchers/L-connectors/all types hinges (wall to glass/glass to glass)/magnetic seals all as specified and as directed.Make : Saint Gobain/ Modiguard Note : Hardware will be paid separately under respective items. 71 Supply and fixing 12mm toughned/tempered frosted glass as in hinged doors, partitions, automatic doors, staircase railings, roof dome works and similar work including cutting to shape, drilling holes required of any size fixed in position with suitable stainless steel 304 Grade all types patch fittings/brackets/catchers/L-connectors/all types hinges (wall to glass/glass to glass)/magnetic seals and including temorary wooden/ply frame wk required to take exact sizes as in staircase railings/ dome work of any shape etc and filling the gaps with silicon all as specified and as directed. Make : Saint Gobain/ ModiguardNote : Stainless steel Hardware will be paid separately under respective items. 72 Supply and fixing double cylinder cam action floor spring with closing force EN4 suitable for max door weight 150 Kg, max door width 1100mm with closing speed 130-10º, final closing speed 10-0º, hold open - 90º, approx weight of floor spring 6Kg, with installation dimensions of size 306x108x40mm fixed in position as per instructions of manufacture includingtop fittings/ hardware from same manufacturer complete all as specified and as directed.Make : Ozone/ Saint Gobain as approved 73 Supply and fixing H type pull glass door Handles of size 25x300/450 mm stainless steel 304 Grade with back to back installation including all accessories like gasket, grub screws etc fixed in position as per instructions of manufacture complete all as specified and as directed.Make : Ozone/ Saint Gobain as approved 74 Supply and fixing reinforing rod 19mm dia at top of showers etc stainless steelincluding all accessories fixed in position as per instructions of manufacture complete all as specified and as directed.Make : Ozone/ Saint Gobain as approved by GE 75 Supply and fixing all types hinges (wall to glass/glass to glass) stainless steel 304 Grade and PSS finish suitable for 10mm glass as in showers complete fixed in position as per instructions of manufacture complete all as specified and as directed.Make : Ozone/ Saint Gobain as approved 76 Supply and fixing all types connectors/ brackets/ catchers etc (L-shaped, wall to glass, glass to glass, floor to glass) stainless steel 304 Grade and suitable for 10-12mm glass as in showers /partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and as directed.Make : Ozone/ Saint Gobain as approved 77 Supply and fixing all types patch fittings stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and as directed.Make : Ozone/ Saint Gobain as approved 78 Supply and fixing Factory made single extruded Pre-laminated WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat with corner round with back grooves of size 50X75 mm”comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Notes: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. Make : Alstone / Century / Rajshree 79 Material and labour for providing and fixing factory made single extruded “Pre-laminated WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick” comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutterand fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge all as specified and as directed.Make : Alstone / Century / Rajshree 80 Supply and fixing Stainless Steel matt/glossyfinished (as approved)” butt hinges 100mm long complete all as specified and as directed.Make : Jolly/ Harrison 81 Supply and fixingStainless Steel matt/glossyfinished (as approved)” butt hinges 150mm long complete all as specified and as directed.Make : Jolly/ Harrison 82 Supply and fixing antique/brass finished metal handle 200mm long complete all as specified and directed.Make : Jolly/ Harrison 83 Supply and fixing aluminium alloy anodised extruded fabricated type handle 150mm long complete all as specified and directed.Make : Jolly/ Harrison 84 Supply and fixing aluminium alloy, anodised, barrel tower bolt (bolt type) 150 mm long of extruded section or cast aluminium alloy and fixed complete all as specified and directed.Make : Jolly/ Harrison 85 Supply and fixingStainless Steel matt/glossyfinished (as approved)”200mm long tower bolts in square shaped with minimum 10mm dia rod complete all as specified and as directed.Make : Jolly/ Harrison 86 Supply and fixingStainless Steel matt/glossyfinished (as approved)” curved Handles 200 mm long complete all as specified and as directed.Make : Jolly/ Harrison 87 Supply and fixingStainless Steel matt/glossyfinished (as approved)”Sliding Door Bolt/Aldrop 16 x 300mm with square nuckle complete all as specified and as directed.Make : Jolly/ Harrison 88 Supply and fixing200mm (8 inches) Mortice Lock Set (square shape or as approved) with 60mm one side knob and one side keys chrome polished, with set of 3 nos. of Keys, 2 nos. of handles, 1 no of cyl and 1 no. LB alongwith all accessories/screws etc as required for fixing the same as per manufacturers instructions complete all as specified and as directed.Make : Jolly/Godrej/Harrison or equivalent as approved 89 Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. 90 Supply and fixing aluminium (extruded section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and as directed. 91 Supply and fixing 300mm, mild steel ordinary rat tail rod (helical type) pattern springs including roller and roller plate complete all as specified and as directed. 92 Supply and fixing 25mm bore minimum 1mm thick antique/brass finished metal curtain rods with antique/brass finished metal brackets and antique/brass finished metal finials of same manufacturer including screws / rawl plugs as permanufacturers instructions for fixing completeall as specified and as directed.Note : (i) Brackets and finial shall be measured and paid separately for supply only and fixing is deemed to be included in this item.(ii). Design and colour shall be approved by Engineer-in-Charge. 93 Supply and fixing Venetian Blinds with 100% Polyester Fabric of thickness 0.4mm (±5%) and weight not less than 169g/sq.m (±5%) roller type for windows of colour/shade as approved complete fixed in position inclusive S&F matching palmets from same manufacturer and all accessories and hardwares for fixing and operation, all asrecommended by manufacturer, all as specified incl taking down old curtain rods of any type complete all as specified and as directed.Make : D Decor or Vista as approved 94 Supply and fixing vitreous china premium/1st quality wall hung water closet rimless of size 555 x 370 x 365 mm with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic seat cover soft closing type as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing including taking down existing of any description/size complete in all respect all as specified and as directed.Make : Cera (Camel Rimless) or equivalent from Hindware/ Jaquar 95 Supply and fixing concealed flushing cistern of PVC with dual flushing system and half frame, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and S type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including actuator knob/flush plates as approved complete in all respect all as specified and as direted.Make : Cera (Chevron) or equivalents from Hindware/Jaquar as approved by GE 96 Supply and fixing vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with S/P trap snow white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified.Note : EWC with S trap will be provided only on G.F. and other remaining floors will be provided with P trap EWCs. Make : Cera (CONVENTIONAL) or euivalent from Hindware/ Jaquar as approved 97 S&F Vitreous China squatting pan of Orissa Pattem of size 580x440mm snow white colour ISI marked, fixed in repairs with integral footrestincluding taking down old unserviceable existing one complete all as specified and directed.Note: The quoted rate shall include provision of P Cast Iron trap complete all as specified and directed.Make : Cera (CALINA S3010102) or euivalent from Hindware/ Jaquar 98 Supply and fixing flushing cistern of Polymer/PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and as directed.Make : Cera/ Hindware/ Jaquar 99 Supply and fixinghealth faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified and as directed.Make : Cera/Jaquar/Hindware 100 supply and fixing Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. Make - Cera/Jaquar/Hindware 101 Supply and fixingCP jet for EWC with chrome finished connction pipe including all accessories for fixing complete all as specified and as directed. 102 Supply and fixing Vitreous China premium quality urinal of size 310x300x555mm snow white colour, and connection to inlet and outlet pipe, and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.Make : Cera (Calorigo) or equivalent from Hindware/ Jaquar as approved 103 Supply and fixing Vitreous China premium quality urinal of size 330x300x450mm snow white colour, and connection to inlet and outlet pipe, and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and as directed.Make : Hindware (Corto) or equivalent from Cera/ Jaquar as approved 104 Supply and fixing Urinal spreader chorme finish for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and as directed.Make : Cera, Hindware, Jaquar 105 Supply and fixing vitreous china premium/1st quality Table Top wash hand basin of size 550 x 400 x 160 mm complete all as specified and as directed. Make : Cera (Campa) or equivalents from Hindware/Jaquar as approved 106 Supply and fixing vitreous china premium/1st quality wash basin (under counter), white, size 580x430 mm including all accessories as recommended by manufacturer complete fixed in positionas per manufacturers instructions complete all as specified and as directed. Make : Cera/Jaquar/Hindware Note : The items for counter will be measured and paid separately. 107 Supply and fixing CP Wall mounted basin spout and operating lever quarter turn consisting of exposed part and concealed part complete all as specified and as directed. Make : Cera (F1015653/F4055101) or equivalents from Hindware/Jaquar as approved 108 Supply and fixing Concealed Stop Cock quarter turn, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Cera/Jaquar/Hindware 109 Supply and fixing 15 mm fancy type chromium plated quarter turn angle cock/valve with CP wall flange cast copper alloy screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and as directed. 110 Supply and fixing CP bottle traps 32mm size with 250mm and 175/190mm long wall connection pipes and wall flanges complete fixed in position complete all as specified and as directed. Make : Cera, Hindware, Jaquar 111 Supply and fixing CP waste couplings 32mm size full thread with 80mm height complete fixed in position complete all as specified and as directed. 112 Supply and fixing Stainless Steel Towel Rack 600mm long with lower hangers including all accessories as recommended by manufacturer for fixing and complete fixed in position including taking down existing of any description/size all as specified and as directed. Make : Cera/Jaquar/Hindware 113 Supply and fixing 15 mm fancy type chromium plated quarter turn bib tap of long body with CP wall flange cast copper alloy with crutch or butterfly handles screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and as directed. 114 Supply and fixing 450mm long braided hose/PVC connection with 15mm brass nuts complete all as specified and as directed. 115 Suppy and fixing 5-Way (3 inlets + 2 outlets) single lever concealed diverter consisting of concealed part and exposed parts CP finish made of brass with all accessories as recommended by the manufacturer connected to 15 GI tubing/ 20mm CPVCincluding CP spout with wall flange of same model and manufacturer complete all as specified and as directed. Make : Cera (Chromo) or equivalent from Jaquar/Hindware 116 Supply and fixing overhead shower 200x200mm square shape with 450mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified and as directed.Make : Cera/Jaquar/Hindware 117 Supply and fixing 5mm thick looking mirror fixed to wall with stainless steel plugs /connecter /spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etcfixed in position.completeall as specified and as directed. 118 Supply and fixing soap dish,stainless steel of suitable size to accommodate soap , tooth brush glass and tooth paste complete all asspecified and as directed. Make : Cera/Jaquar/Hindware 119 Supply and fixingstainless steel grating 125x125 mm/ 150x150mm size square shaped with self locking arangement for floor trap with or without hole as required fixed in position complete all as specified and as directed. 120 Supply and fixing PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instructions including bends/tee/elbow etc. laid in walls for connecting bottle traps complete all as specified and as directed. 121 Taking up or down existing steel tubing and connections, 20mm bore complete all asspecified and as directed. 122 Supply and fixing20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. 123 Taking up or down existing steel tubing and connections, 25mm bore complete all as specified and as directed . 124 Supply and fixing 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed . 125 Taking up or down existing steel tubing and connections, 15 mm bore complete all as specified and as directed. 126 Supply and fixing 20mm (OD 22.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confirming to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer including all CPVC SDR 11 fittings as required andsuitable for fixing 15mm CP faucets/ fixtures complete all as specified and as directed.Make : Supreme, Finolex, SFMC, Prince 127 Supply and fixing 25mm (OD 27.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confirming to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as requiredcomplete all as specified and as directed.Make : Supreme, Finolex, SFMC, Prince 128 Supply and fixing female Brass Threaded Adaptor (FTA/ FBTA) for 20mm dia CPVC pipe all as specified and as directed. 129 Supply and fixing Brass elbow (3/4 x 1/2) for 20mm dia CPVC pipes completeall as specified and as directed 130 Supply and fixing ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and as directed. Make :Sintex/Diplast/Sheetal/Supreme 131 Supply and fixing ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20mm bore iron pipe or brass ferrule and fixed in repairs complete all as specified and as directed. Make : ZOLOTO, L&T Valves 132 Supply and fixing ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm bore iron pipe or brass ferrule complete all as specified and as directed.Make : ZOLOTO, L&T Valves 133 Dismantling of sewage pipe of any size and descriptionfrom any position jointed in cement mortar and taking out of trenches if required complete all as specified and as directed. 134 Dismantling and taking down bends /floor traps /nahani traps /tee / branch pieces / cowls etc of any/size/description jointed in cement mortarfrom any position complete all as specified and as directed. 135 Supply and fixing uPVC (SWR) floor traps confirming to IS : 14735-99 and as per international standards with 110mm bore outlet including jointing with lubricant/ PVC cement solvent as per manufacturer’s instruction to UPVC waste pipe fixed in cement concrete 1:2:4 type B-2 complete all as specified and directed.”Note:The quoted rate shall include embedding the floor trap incement concrete 1:2:4 type B-2 block of size 300x300x250 mm 136 Suppy and fixing uPVC (SWR) floor traps confirming to IS : 14735-99 and as per international standards with 75mm bore outlet including jointing with lubricant/ PVC cement solvent as per manufacturer’s instruction to UPVC waste pipe fixed in cement concrete 1:2:4 type B-2 complete all as specified and directed.”nt/ PVC cement solvent to PVC waste pipe fixed in cement concrete 1:2:4 type B complete all as specified and as directed.Note: The quoted rate shall include embedding the floor trap incement concrete 1:2:4 type B-2 block of size 300x300x250 mm 137 Supply and fixing uPVC (SWR) Nahni traps confirming to IS : 14735-99 and as per international standards with 75mm bore outlet including jointing with lubricant/ PVC cement solvent as per manufacturer’s instruction to UPVC waste pipe fixed in cement concrete 1:2:4 type B-2 complete all as specified and directed.”Note: The quoted rate shall include embedding the floor trap incement concrete 1:2:4 type B-2 block of size 300x300x250 mm 138 Supply and fixing uPVC (SWR) Type-B pipe single socket 110mm bore confirming to IS 13592-92 in any length with including jointing with lubricant/ PVC cement solvent as per manufacturer’s instruction to UPVC waste pipe, fixed to wall ,including stack clamps out of 50x5 mm flat and 16 mm dia iron stays, including bolts and nuts etc and making necessary connections complete all as specified and as directed.” 139 Supply and fixing uPVC (SWR) Type-B pipe single socket 110mm bore confirming to IS 13592-92 in any length with including jointing with lubricant/ PVC cement solvent as per manufacturer’s instruction to UPVC waste pipe, laid in trenches/floorand making necessary connections complete all as specified and as directed.” 140 Supply and fixing uPVC (SWR) Type-B pipe” single socket 75mm bore confirming to IS 13592-92 in any length “with lubricant/ PVC cement solvent as per manufacturer’s instruction”fixed to wall ,including stack clamps out of 50x5 mm flat and 16 mm dia iron stays, including bolts and nuts etc and making necessary connections, complete all as specified and as directed. 141 Supply and fixing uPVC (SWR) Type-B pipe” single socket 75mm bore confirming to IS 13592-92 in any length “with lubricant/ PVC cement solvent as per manufacturer’s instruction” laid in trenches/floor and making necessary connections, complete all as specified and as directed. 142 Supply and fixing uPVC (SWR) confirming to IS : 14735-99 and as per international standards ” bend 110mm bore pipes (any radius) with access door fixed “with lubricant/ PVC cement solvent as per manufacturer’s instruction”complete all as specified and as directed. 143 Supply and fixing uPVC (SWR) confirming to IS : 14735-99 and as per international standards ”bend 75mm bore pipes (any radius) with access door fixed “with lubricant/ PVC cement solvent as per manufacturer’s instruction”complete all as specified and as directed. 144 Supply and fixing uPVC (SWR) confirming to IS : 14735-99 and as per international standards ” double branch door Tee suitable for 110mm bore pipes ISI marked fixed“with lubricant/ PVC cement solvent as per manufacturer’s instruction” complete all as speciied and as directed. 145 Supply and fixing uPVC (SWR) confirming to IS : 14735-99 and as per international standards ”Single door Tee suitable for 110mm bore pipes ISI marked fixed “with lubricant/ PVC cement solvent as per manufacturer’s instruction”complete all as speciied and directed. 146 Supply and fixing uPVC (SWR) confirming to IS : 14735-99 and as per international standards ”Single door Tee suitable for 75mm bore pipes ISI marked fixed “with lubricant/ PVC cement solvent as per manufacturer’s instruction”complete all as speciied and as directed. 147 Supply and fixing uPVC (SWR) confirming to IS : 14735-99 and as per international standards ” Cowls for 110mm bore pipes fixed “with lubricant/ PVC cement solvent as per manufacturer’s instruction”complete all as specified and as directed.. 148 Supply and fixing uPVC (SWR) confirming to IS : 14735-99 and as per international standards ” P or S trap 110mm bore with long arm ISI marked fixed “with lubricant/ PVC cement solvent as per manufacturer’s instruction”complete all as speciied and as directed. 149 Supply and fixing uPVC (SWR) confirming to IS : 14735-99 and as per international standards ”gully trap 125/110 mm setting and jointing “with lubricant/ PVC cement solvent as per manufacturer’s instruction” complete all as specified and as directed. 150 Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. 151 Material and labour for water proofing treatment to sunken floor with depth not exceeding 450mm with the following course of treatment/ specification:-(i) Cleaning top surface of floors /slabs and laying 100 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrers instruction laid in slope 1:20 towards spouts including coveting corners(ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturers instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation .(Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand.Make of PU paint - Dek guard PUor equivalant approved brand. (vii) 2 Nos 40mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegateNote : Only top/finished horizontal surface will be measured for the payment purpose. 152 Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillet complete all as specified and as directed. 153 Supply and fixingWPC Louvers / WPC Wall panelling of fluted / louvers / hollow sections / (colour/pattern as approved by AO) of any size and description complete fixed in position in all respect including all accessories like fasteners/ screws/solvent/ fillets etcl as recommended by manufacturer complete all as specified and as directed. 154 Supply and fixing PVC Wall panelling of fluted/louvers/hollow sections/ (colour/pattern as approved by AO) of any size and description complete fixed in position in all respect includingall accessories like fasteners/ screws/solvent/ fillets etc all as recommended by manufacturer complete all as specified and as directed. 155 Material and labour for 3mm thick ACP sheets of any colour as approved in wall cladding/ceiling etc. with 12mm groove of silicon water proof and covering all screws on ACP by silicon including aluminium frame work of section 40x25 mm and 14 gauge thickness fixed to existing wall/structure with 75 mm stainless steel screw and membres interconnected with 40/20mm stainless steel screw, also including all necessary use of all double line scaffolding, trestle , ladders, cradles etc. necessary for execution of work and protective measures including hoisting and lowering fixed to frame work at height n exc 8mtr all as specified and as directed.Make : Alstone or equivalent as approved 156 Supply and fixing anodised aluminium snap grid frame work (size of grid 605x605mm) for false ceiling all as specified including hangers 6 mm dia. G.I. (upto 1200mm length)adjusting level fixed to roof slabs by means of ceilling cleats made out of G.l. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. Make: Armstrog/Gyproc or Equivalent as approved. 157 Material and labour for 12 to 12.50mm thick semi-perforated/pin holed particle board/tiles, 600x600 ± 5 mm in size fixed in false ceiling as per manufacturers instructions to existing frame work or on snap grid as in repairs complete all as specified and as directed.Make: Armstrog/Gyproc or Equivalent as approved. 158 Material and labour for dismantling of MS like asnewels, Balustrades including wood hand rails and all similar items all as specified and as directed. 159 Supply and fixing fabricated Stainless steel Tubes (Rectangular/Square/Circular in shape) of Grade 304 for newels, Balustrades, railings, cap, top hand ralling along the length and intermediate section and all similar works including Rubbing/Polishing all as specified and as directed. 160 Supply and fixing MS hollow rectangular/square/circular tubes/pipes of YST 310 Grade as in frame work for cooler stands /roofs /rafters /purlins /chajjas/trusses/ columns/ struts etc and like similar items etc. complete all as specified and as directed. 161 Material and labour for preparation of steel and iron surfaces of any description nor otherwise described over 10 cm width or girthincluding purlins/ rafters/ trusses/ columns/ struts/railings/ blusterades/ cooler stands/ any frame work etc and the like works and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.Make : Asian Paints/Berger/Nerolac 162 Supply and fixing stainless steel sheet of 250 mm wide and not less than 1mm thick as in crumple/ expansion joints all as specified and as directed. 163 Supply and fixing18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed.Make : Action Tesa/ Greenpanel/CenturyNote : Board on back side wall will be fixed with minimum 5mm PVC spacers/buffers. The payment for the same deemed to be included in the quoted unit rates. 164 Supply and fixing 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side whitebalancing with density of 850 Kg/cu.m complete all as specified and as directed. Make : Action Tesa/ Greenply/Century 165 Supply and fixingBall bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and as directed. Make: KAFF/Hettich 166 Supply and fixing Piano/continuous hinge of size 19 mm stainless steel complete all as specified and as directed. 167 Supply and fixing ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions complete all as specified and as directed. Make : Hettitch or equivalent as approved. 168 Taking down of existing steel door of size exc 2.0 sq.m and n. exc. 3.0 sq.m of any description/ weight with hold fasts and refixing in same position with filling the hold fast with 1:2:4 PCC of min size 23x20x20 cm with minor repairs/ welding etc all as specified and as directed. 169 Suply and fixing 12mm thick HDF Board both side decorative compact laminate fire retardent/ termite proof / BWP borer proof of Approved colour, shade side as in cubical with 10 years Guarantee for the door against any moisture cubical complete including the following :- (1) Stainless steel adjustable shoes/ legs 316 grade 150mm high - 02 Nos. (2) Stainless steel gravity hinges 304 grade -3Nos.(3) Stainless steel coat hook 304 grade - 1 Nos.(4)Stailnless steel door knob 304 grade-01 Nos. (5)Stainless steel indicator lock 304 grade -01 Nos. (6)Profile U-Channel (Aluminium Powder coated ) length 1.82mm (6feet) each-02. (7) Door stop (Aluminium powder coated) length 1.82mm (6feet) each-02. (8)Noise defending tape/gascut rubberlength 1.82mm (6feet) each-01. (9)Hollow circular pipe of aluminium powder coated of size 30/40mm for top rail of cubicals.(10) Corner connected , wall brackets , S-S screw and wall plugs as required.Make:12mm board action tesa/Greenlam etc and fixed in position completeall as specified and as directed. 170 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out as in soft/loose soil complete all as specified and as directed 171 Material and labour forHardcore of broken stone or bouldergauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface completeall as specified and as directed. 172 Material and labour for cement concrete 1:4:8 typeD-2 (using 40 mm graded stone aggregates.) as in sub base under floors complete all as specified and as directed. 173 Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. 174 Material and labour for cement concrete 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregate as inbenching, rounded or chamfered on edges, coving shall be 150 mm in radius complete all as specified and as directed. 175 Removingthe excavated material soiln exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. 176 Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings size as switches, ceiling rose, pendant, regulator, sockets, light fittingetc. removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed. 177 Material and labour for Point wiring (concealed) with 1.5 Sqmm(Nominal area) PVC insulated and PVC unsheathed FRLSH multi stranded copper conductor single core cable drawn through and including PVC non metallic conduit of 20 mm diaISI marked with complete accessories, including sunk/pressed metal flush box mild steel1.6 mm thick terminal boxes with white moudular cover plate with frame for mounting of switches.sockets/fan regulators etc .ISI marked complete including PVC insulated and unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly, making good surface with white wash or any type distemper as per existing colour of buildingcomplete all as specified and directed including in ceiling portion surface conduit wiring to be done for the following :- (a) One lightpointcontrolled by oneone way switch. 178 (b) One fan pointcontrolledby one one way switch. 179 (c) One bell/buzzer point controlled by one push button. 180 (d) One 3/5 pin socket outlet 5 Amp on the same board with other swithes. 181 (e) One 3/5 pin 5 Amps socket outlet on indepandant board. 182 (f) One light point controlled by two two way switches 183 Allas per serial item No 177 here-in-before but with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pinsocket power point including 2.5 Sqmm copper conductor green as colour for earth contineuity complete all as specified and as directed. 184 Taking down sub main wiring and Supply and fixing Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 sqmm LT, 1100V grade, drawn through and including adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 6.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor comlete all as specified and as directed. Notes:-(i) Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/approprite dia shall be measured as one run length,(II) Cable required for connection to DBs shall deemed to be inclusive and shall not be measured separately.(iii) Earth wire shall run inside the conduit pipe(iv) Extra length of cable required for connection to MCBs shall deemed to be included in unit rate. Make of Cable:- Plaza/Havells /policab, Make of PVC conduit - Kinjal/atul/plaza Plast/Kalinga 185 Supply and fixing in replacement of modular switch single pole one way 5/6 Amps, one module complete all as specified and as directed. 186 Supply and fixing in replacement of modular switch single pole one way 16 Amps, one module complete all as specified and as directed. 187 Supply and fixing in replacement of modular switch single pole two way 5/6 Amps, one module complete all as specified and as directed. 188 Supply and fixing in replacement of modular type, socket6 Amps, 2/3 pin combined 2 module complete all as specified and as directed. 189 Supply and fixing in replacement of modular type, socket 6/16 Amps- 2/3 pin combined2 modular complete all as specified and as directed. 190 Supply and fixing modular type, Bell push 1 way, 6 Amps, 1 module complete all as specified and as directed. 191 Supply and fixing Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed. 192 Materia land labourfor Ceiling rose, 3 phasepoly carbonate isolated body 3 terminal brass flush type 6 Amps,250 volts ACISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and as directed. 193 Supplyand fixing In replacement of old unserviceable modular fan regulator 230 volts,120 watt,- 2 module, step type (5 step) socket type complete all as specified and as directed. 194 Supply and fixingAngle holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm diacompleteall as specified and as directed. 195 Supply and fixing In replacement of old unserviceable light fittings LED tube light fitting 1x20 Watt box type industrial batten typewithbipin holders connector block complete with all accessories internally prewired including connection with three core flexible copper conductor cable of suitable size and provision ol 01 No. 20 wattretrofit LED tube rod T8 polycabonate complete all as specified and as directed. 196 Supply and fixing In replacement of old unserviceable security light fittings, versatile pressure die-cast aluminium with high power LED 35 W as light source complete with LED 35 W 5000Kincluding bracketsmade out of 40 mm bore GI pipe light gradebent to shape including 02 Nos MS clamps made out of 50x5 mm flat iron including bolts,nuts and connection with three core flexible copper conductor cable of suitable sizecomplete all as specified and as directed. 197 Supply and fixing In replacement of old unserviceable surface mounting light fittings round shape 15 watt with high efficiencydiffusere soft glare free light complete with driver, holders, LED lamp suitble for roof ceiling including connecting with three core flexible copper conductor cable of suitable size complete all as spd and directed . 198 Supply and fixing In replacement of old unserviceable distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,single pole and neutral 250 volts ,flush to wall complete all as specified and as directed 199 Supply and fixing In replacement of old unserviceable distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof VTPN 4 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar,earth bar ,triple pole and neutral 415volts , flush to wall complete all as specified and as directed. 200 Supply and fixing In replacement of old unserviceable MCB single pole,6 to 32 Amp 240 volt B curve 10 KA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area completeincluding suitable sizecopper Lugs complete all as specified and as directed. 201 Supply and fixing In replacement of old unserviceable Miniature circuit breakers C curve ISI marked 240 Volt, 50 Hz, SPN 32 Amps, breaking capacity 10 KA B.complete all as specified and as directed. 202 Supply and fixing In replacement of old unserviceable Miniature circuit breakers (MCBs) ,B curveISI marked 415 Volt, 50 Hz, TPN 100 Amps, breking capacity 10 KA.complete all as specified and as directed. 203 Material and labour earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.3 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 ofSSR-2009 Part I and includingnecessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentions), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc complete all as specified and directed.NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point. and chamber shall be made 0.5 mtr away from the earthing pit. 204 Supply and fixing LED lamp 12 watt B22 CDL inverter bulb complete all as specified and as directed. Make : C&S/Havells/Surya 205 Supply and fixing rigid non-metallic PVC conduit of size 20 mm dia exclusive of boxes ( junction/terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers ,lock nuts, saddles, pipe hooks etc. complete all as specified and as directed . 206 Supply and fixing in replacement ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.Note:- Old u/s C/Fan to be deposited in MES store. 207 Supply and fixing in replacement exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers, BEE, five star rated including fixing the fan with all connecting accessories and making electric connection from c/rose etc.including making suitable size hole in wall built in cement mortar and groutinganchor bolt for fixing Exhaust Fan on walland making good the disturbed surface to match the existing surface complete all as specified and as directed..Note:- Old u/s C/Fan to be deposited in MES store. 208 Supply and fixing in replacement PVC exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers, BEE, five star rated including fixing the fan with all connecting accessories and making electric connection from c/rose etc. including making suitable size hole in wall built in cement mortar and groutinganchor bolt for fixing Exhaust Fan on walland making good the disturbed surface to match the existing surface complete all as specified and as directed.. Note:- Old u/s C/Fan to be deposited in MES store. 209 Supply and fix in replacement of Recess mounted LED luminaire with more light distribution and clutter free ceilings of 36 watt suitable for gridd celling Cutout dimensions: 2 x 2 Model : Immaculate LED Trimlesscomplete all as specified and as directed 210 Supply and fixing in replacement of existing unserviceable SP&N enclosure with 2 pole and Earth Metal Plug & Socket for incorporating 10A / 20A SPN / DP MCB With Plastic Cover earthcomplete with one single pole MCB of 20 Amp complete all as specified and as directed 211 Supply and fixing 18 Watt square surface mounted LED panel PDC, aluminium housing and high tranlucent frosted plastic diffuser of luminair efficiancy 100 lumen per watt incluidng making electircal connections from ceiling rose to mirror light with suitable size of electrical cable and making good the disturbed surfaces to match the existing surface complete all as specified and as directed. 212 Supply and fixing In replacement of old unserviceable XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt gradecross sectional area 70 Sqmm and 3.5 core complete all as specified and as directed 213 Material and labour for laying GI tubinglight grade 80 mm bore dia with all fittings for cable protection including GI clamps nut bolts and washer etc all as specified and as directed. 214 Material and labour for excavation in trenchesn.exc 1.5 mwidth and n.exc 1.5 m in depthin any type of soil/strata for foundations, poles.Struts,laying cable etc and getting out completeall as specified and as directed . 215 Returning, filling in any type of soil including spreading , leveling , wateringand well rammming in layers n.exceeding 25 cmthick complete all as specified and as directed. 216 Removing excavated any type of soil from site to a disdance not exceeding 50 mtrs and depositing where directed at level not exceeding1.5 mtr above the starting point complete all as specified and as directed. 217 Material and labour forsand cushioning for UG cables using dry fine river sand, 8 cm below the cable and 15 cm above the cable in trenches including spreading, levellingcomplete all as specified and and directed.Note: Only punned thickness shall be measured for payment. 218 Material and labour for old sizewell burnt,sub class B bricks laid flat, dry in trenches perpendicular to the direction of cable for cable protection complete all as specified and as directed. 219 Supply and fixing Change over switch 100 Amps 4 Pole 440 Volts off line type complete all as specified and as directed. Make : C&S/Havells/L & T 220 Supply and fix in repairs erecting in true verticle position of steel tublar swaged poles completecomplete with cast iron base plate, finial taper, plug, bolt, nuts and screws as as specifiedtype 410 SP-31(9.00 metres long) conforming to relevent IS including applying two coats of aluminium paint over one coat of red oxide primer to the full length of the pole and also two coats of bituminus paint inside outside of bottom portion upto 1.5 mtrs length and fixing 01 No. circular bend 32 mm bore GI light grade 2 mtr length bracket fixed with 50x5 mm flat iron clamp on pole for mounting LED security light all as specified and as directed.Note:- Excavation,earth work and PCC shall be measured and paid separetaly. 221 Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded broken stone aggregate as in foundations,filling and mass concretecomplete all as specified and as directed. 222 Material and labour for cement concrete 1:2:4 type B-I using 20 mm graded broken stone aggregate as in foundations,filling and mass concretecomplete all as specified and as directed. 223 Material and labour for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for coping around the pole strut above ground level, foundation of stay etc. including neccassory form work and finishing the surface fair and even without using extra cement complete all as specified and as directed. 224 Supply and fixing LED street light fitting 120 watt 230 V AC outdoor type with high pressure aluminium die cast housing and heat resistat complete with driver ,lamopbracket and impact and corrosion resistant including thermal management in multiple optics complete with IP66 protection complete all as specified and as directed. 225 Supply andfixing in replacement Led post top fitting 40W powder coated aluminium die cast and spun aluminium with clear/ opal diffuser suitable for landscape lighting in IP65 including GI Pipe of suitable dia and height reqd at site including PCC work and connection properly with existing LT OH line or From main MCB DB complete all as specified and as directed. 226 Supply and fixing in replacement Led post top fitting 20W powder coated aluminium die cast and spun aluminium with clear/ opal diffuser suitable for landscape lighting in IP65 including GI Pipe of suitable dia and height reqd at site including PCC work and connection properly with existing LT OH line or From main MCB DBcomplete all as specified and as directed. 227 Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable flat or circular stranded conductor of sizef 10 Sqmm, 2 core complete all as specified and as directed. 228 Supply and fixingair ternimation,single pointed aluminum rod, 12 mm dia and 300 mm long complete all as specified and as directed 229 Supply and fixing aluminium strip 25 mm x 3.15 mm compete with saddles and fixing screws etc for for roof conductor and down conductors above ground complete all as specified and as directed . 230 Supply and fixing galvanised iron strip 32 x 6 mm burried in ground complete all as specified and as directed 231 Material and labour for Test point terminal block for lightening conductors made out of gun metal or phosphorus bronze size of 75 x 75 x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexa head screws including connecting with earthing and GI/Aluminium strips complete all as specified and as directed. 232 Material and labour for earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below noral ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in altenate layers and electode connected to galvanized iron strip 32x6 mm dia size dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate nNo 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentins), tpe C-1 chamber, RCC (1:2:4) type B-1, reinforced with 6mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc, complete all as specified and as directed. Note : The unit rate includes earth strip and protection pipe upto (Maximum 7.5 metre from earth plate) earth point/test point. and chamber shall be made 0.5 mtr away from the earthing pit.

INR 1000 /-

INR 1.46 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB