Tender For Special Repair To Certain Technical Bldg At Af Stn Bkt; 1 Demolition of cement concrete of any description and in any position and complete removal of demolished material exc. 500 m but not exceeding 1.5km to outside Defence land complete all as specified and as directed. 2 M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floor and finished rough to receive the floor tiles etc complete all as specified anddirected. 3 Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface(but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed. 4 M&L for Non - skid DigitalCeramicjoint lesscoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including15 mm thick screed bed in CM (1:4). Complete all as specied and directed.(Make-: Kajaria Tiles/HR Johnson/Somany) 5 M&L for glazed ceramic colouredDigital tiles in vertical surface300x600x7mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM (1:4) Complete all as specied and directed. (Make-: Kajaria Tiles/HR Johnson/Somany) 6 M&L for Vitrified digital double charge light coloured tiles 8-9 mm thick ( square or rectangular) polished, area of each tiles 600 mm X 600 mm as in floors etc.and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4Complete all as specied and directed. (Make -Kajaria/ Somany/ HR Johnson) 7 Ditto all as per item No 06 above but on wall surfaces over and including 10mm thick rending in CM (1:4) complete all as specified and directed. 8 M&L for mirror rubbing & polishing of kota stone, where ever required to give glossy finish and half nose moulding (bull nosing) etc,complete all as specified and dirceted. 9 Demolition ofreinforced cement concrete of any description at groundfloor and complete removal of demolished material exc. 500 m and upto total distance of 1.5km to outside MoD Land complete all as specified anddirected. 10 Use and waste for formwork to sides and soffits of floor or room beams, beams haunchings, girders, bressummers, lintels, girders, bressummers, lintels, cantilevers, shelves includings supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete complete all as specied and directed. 11 M&L for Machine cut Cudappah stone slab size 25-30mm thick over cement screed base,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specied and directed. 12 M&L for Jet south black granite slab work 18 to 20mm thick (table rubbed and polished) in cooking platforms and jointing in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types over and including 15mm thick screed bed in CM (1:6)set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. 13 M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified directed. 14 Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all specified anddirected. 15 M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed. 16 M&L for Brick work with subclass B bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar (1:6)but except bricks Complete all as specied and directed. 17 M&L for Brick work with fly ash old size bricks, straight or curved to any radius in half brick thick walls, built in CM (1:4) complete all as specified and as directed. . 18 Taking down cement plaster on brick or concrete surfaces walls/chajja/roof,facia at any heigh including racking out joints hacking for key scrubbing down with water etc and M&L for rendering 15 mm thick in cement mortar (1:4) on fair face of brick work of walls mixed with water proofing compound (ISI Marked) @ 2% by weight of cement or as per manufacturers instructions finished even & smooth without using extra cement complete all as specified including mouldings chamfers splay srounded or coved angles. Beards grooves and rebate upto 10 cms in width or 15 cms in girth. Note: Supply only water proofing compound shall be measured and paid for seperately complete all as specified and directed. 19 M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including one coat of wall care putty 1 mm thick over priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over new/oldsurfaces complete all as specified and directed. Note: Putty,Primer and Emulsion to be carried out through air less spray machine complete all as specified and directed.(Mechanical Means) (Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast 12) 20 M&L for complete removal of existing treatment on RCC/stone/concrete/brick walls including preparation of old surface by affixing wall care putty rubbing to smooth finishing and and applying two coat of 100% premium acrylic emulsion Comouflaging pattern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted)with silicon additives @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @09.ltr /10sqm over new prepare surface and height upto 9 meter complete all as specified and directed by and directed. Note : Primer and emulsion to be carried out through airless spray machine (Mechanical means)(Make Asian paint apex ultima/Berger weather coat long life 10/Nerolac excel everlast 12). 21 Supply only Integral water proofing compound complete all as specified and directed. 22 Taking down cement plaster on brick/stone walls/concrete in Roof/Chajja etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all specified and as directed. (Note :- Work will be carried out up to 3rd storey with necessary scaffolding). 23 M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar (1:6) rendering is to be finished even and smooth without using extra cement. 24 M&L for preparation of old distempered surfaces of wall by washing rubbing down and stopping of old distempered surface of wall including cornices etc and 1mm thick wall care putty as required for levelling and applying two coat of oil bound distemper (Oil emulsion any tint) on wall complete all as specified and directed.Note: Putty,Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) (Make :- Asian Paint Tractor uno/Nerolac Beauty Acrylic/ Berger easy clean) 25 M&L for rendering 10 mm thick on fair faces of brick or concrete surfaceceilings, in cement mortar (1:3) finished even and smooth without using extra cement and applying two coat of white wash on new plastered surface of ceiling after preparation of surfaces complete all as specified and as directed. 26 M&L for preparation of old decorated surfaces by brooming down or steel wire brushing,scrappingdown smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices,pilasters etc and applying one coat of white wash complete all as specified and directed. 27 Taking down chowkats or frames areanot exceeding 1.50 Sqm(w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate, complete all as specified and directed. (Note – The quoted rate shall be deemed toinclude for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid). 28 Taking down chowkats or frames area exceeding 1.50 Sqm andnot exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC (1:2:4) type B0 ussing 12.5 mm graded stone aggregate, complete all as specified and as directed. (Note – The qouted rate shall be deemed toinclude for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid). 29 S&F factory made UPVC door frame white colour extrudedwith wall thickness of 2.3mm (+ -0.2mm). Corrner of door frame jointed with galvanised brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frame reinforcement by galvanised MS tube of size 19mm x19mm and 1mm (+- 0.10mm) wall thickness and 3 Nos stainless steel hines by the manufacture and as per directed.(Make :- Rajshree plastiwood/Kaka Industries/century plywood). 30 S&F factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of2.3 mm(+ 0.2 mm). Window profile with hollow section with mitlti chamber, frame (60 mm x 58 mm), sash (60 mm x 78 mm). T profile (onevertical length in between two shutters) (60 mm x 74 mm). Glazing bead (35 mm x 20 mm) will be mitered cutand fusion welded at all corners, including drilling of holes for fixinghardware and drainage of water etc. Making arrangement for fixing ofhardware. EPDM gasket 1.2 + 0.2 mm thick galvanized steel Frame (28 mm x 21.5 mm), sash (31 mm x 27 mm), T profile (27 mm x 17 mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners.(Hardware : casement doorhandle made of zinc alloyed (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with strikes 3D Hinges of zincalloyed (white powder coated) and 5 mm thick glazing with selected quality glass.}( Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose).(Make :- Rajshree Plastiwood/Kaka Industries/century plywood). 31 S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (112mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. locking arrengment as directed, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2.00 sqm each complete all as specified and directed. (Make:- Compreshive/Prominance/Fenesta. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)(Make :- Rajshree Plastiwood/Kaka Industries/century plywood). 32 S&F factory made UPVC white colour fixed vent areaexceeding 1.00 sqmnot exc. 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass cmplete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) :-(Make :- Rajshree Plastiwood/Kaka Industries/century plywood) 33 S&F for sheet glass 5.50 mm thick, toughned glass, fixed in UPVC windiw including all fitting and fixturres complete all as specified and directed. Make:- Modigaend/ Saint Bobin/ Asahi India Glass. 34 S&F Factory made single extruded(Wood Polymer Composite) solid door/ window/ Ceosetory windows & otherFrames/ Chowkhat with double ribet of size 125mm x65 mmcomprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity indexof 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) &1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spreadof flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant with and encluding MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(Make :- Rajshree Plastiwood/Kaka Industries/century plywood) 35 S&F factory madesingle extruded WPC (Wood Polymer Composite) solid decorative type 10mm deep CNCmoulding design with 0.12 micron laminated both sides shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame ofClass A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and direction. (Make :- Rajshree Plastiwood/Kaka Industries/century plywood). 36 S&F Factory made single extruded WPC(Wood Polymer Composite) solid door/ window/ Ceosetory windows & otherFrames/ Chowkhat of size 45X70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity indexof 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) &1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spreadof flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and direction. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (Make :- Rajshree Plastiwood/Kaka Industries/century plywood). 37 S&F factorymade single extruded WPC (Wood Polymer Composite) solid decorative type 10mm deep CnCmoulding design with 0.12 micron laminated both sides shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame ofClass A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws. Complete all as specified and directed. (Make :- Rajshree Plastiwood/Kaka Industries/century plywood) 38 S&F for Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specifed and directed. 39 S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed. 40 S&F Aluminium handles cast type anodised of 150mm complete all as spcecified and directed. 41 S&F butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mm long, type B-21 complete all as specified and directed. 42 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 43 S&F for mild steel framed work such as grills, gratings etc with ends of bars, M S pipe shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed. 44 S & F for stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed withtinned tacks or galvanised wire staples complete all as specified and directed. 45 M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat ofzink chromeprimer including necessaryrubbing with sand paper or grinded byhand grinder to achieve smooth and even surface complete all as specified and directed. (Make :- Asian Apcolite Premium Gloss Enamel/Nerolac Synthetic High glass Enamel /Berger HI-Glass luxol ) 46 M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description having width/girth exceeding 10 cmcomplete all as specifie including preparation and rubbing withsand paperto make surface even and smooth complete all as specified and as directed.(Make :- Asian Apcolite Premium Gloss Enamel/Nerolac Synthetic High glass Enamel /Berger HI-Glass luxol). 47 S&F in rplacement 20 mm nominal outer diaChlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specifed and directed. 48 S&F in replacement GI tubes medium grade galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. 49 Dismantling water tanks and removing to store of water storage tanks (Cap. 500 ltr to 1000 ltr ) complete all as specified and directed. 50 Supply and fixingRotational moulded polyethylene water storage tanks of 500 litres capacity (white colour with threaded lid cover,minimum tripled layer , weight not less than 18 Kg), hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, highcomplete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specifed and directed. 51 S&F in rotational moulded polyethylene water storage tanks of 1000 litres capacity (White colour with threaded lid cover, cylindrical vertical with closed topminimum tripled layer , weight not less than 33 Kg), white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, highcomplete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified and dircted. 52 S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and directed (Minimum weight 20mm-210 gms). (Make -: Prayag /JK Rubber Industries/Supreme Industries/ Prince/ JAL). 53 S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Bore dia of 20mm complete all as specified and as directed.(Make :- Zoloto/Leader/Bajaj) 54 M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as specifed and directed. 55 S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm L bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed.(Make:- Jaquar/kohler/Grohe/ JAL). 56 S&F Vitreous china ware pedestal type water closet white, with P or S trap including self closing seat cover, closed pattern with flat bottom, 100 mm bore pipe & bedding in PCC (1:2:4) B-1 using 20 mm graded stone aggregate complete all as specified and directed. (Make:- Jaquar/kohler/Grohe) 57 S&F in repair CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified and directed.(Make:- Jaquar/kohler/Grohe). 58 S&F in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.(Make:- Jaquar/kohler/Grohe) 59 S&Fin repair angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, complete all as specified and directed. (Make:- Jaquar/kohler/Grohe) 60 S&F in repair PVC connection 15 mm x 450 mm including PTMT check nut at both ends screwed for iron pipe of 15 mm bore. complete all as specified and directed. 61 S&F in repairVitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of waste couplingcomplete all as specified and as directed.(Make:- Jaquar/kohler/Grohe) 62 S&F in repairstainless steel Shop dish with PU foam complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit) 63 S&F in repair for bevelled edge mirror of size (600mm x 450mm), selected quality glass approved size , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with SS screws and cup washers complete all as specified and directed. 64 S&F in chromium plated brass Urinal auto closing type with built in control box & wall flange etc. complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit ) 65 S&F in vitreous china half stall urinal with grating and union complete set with 40 mm dia GI light grade waste pipe including. brackets etc complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit ) 66 S&F in urinal spreader chromium plated for fixing with 15 mm bore pipe etc. complete all as specified and directed.(Make:- Cera/Prayag/Jaquar/kerovit) 67 M&L for cutting chases, pinning in , making good to facings where required and pointing in cement mortar1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls complete all as specified and as directed. 68 Dismantling PVC/Cement/CI pipes 50 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all as specifed and directed. 69 S&F in UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ringjoints laid in trenches orin floors complete all as specified anddirected. 70 S&F UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of GI flat 50mm wide 5mm thick and 16mm dia fixed to wall with nail at spacing of 1m center to center ,complete all as specified and directed. 71 S&F in UPVC (SWR)type B pipes 75 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and directed. 72 Supply and fixing, UPVC (SWR) , bends for75 mm bore , complete all as specified and as directed. 73 S&F in UPVC(SWR) , bendsfor110 mm borecomplete all as specified and directed . 74 S&F in repair UPVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. 75 M&L for high performance hybrid plyurea elastomeric waterproofing coating cold applied of spray/brush applied,samrtcare ulton liquid membrance at 1.5kg/sqm with an elongation of 600% and tensile strength of 12.6 N/sqmm as per ASTM D2370,crack bridging ability of 3.5mm as per ASTM C1305,shore a hardness of min 75 as per ASTM D2240.The system smartcare includes final base preparation as per site requirement,epoxy primer application and applying smart care Ultron or approved equivalent in two coats at a coverage of 1kg/sqm etc complete as per manufacturer specification including complete removal of old waterproofing system and repairing and cleaning the existing surface complete all as specified and directed.Make :- Asian Paints/ STP/ Berger/ Sika/ Pidilite. 76 M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope commplete all as specified and directed. 77 M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggreate as in benching , haunching kerb etc rounded or chamfered on edges including necessary formwork complete all as specified and directed 78 M&L for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in sub base of 100 mm thickness complete all as specifed and directed. 79 M&L for precast factory made Chequered tiles of size 300mm x 300mm glazed topmade in whitecement and pigment base of thickness not less than 19mm in differentcolourand pattern(compressive strength not less than 250 kg/sqcm) set and jointed in neat cement slurry cover and including 20mm thick screed bed in CM (1:4)complete all as specifed and directed. 80 M&L for plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregatein lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and as in benchingand similar work including necessary form work complete all as specifed and directed. 81 S&F Anodised aluminium powder coated snap grid frame workexposed suspended system grid size 595mm X 595 mm comprising of GI powder coated main T -3600/crossT-600/size 25X35X0.7mm, wall angle 25X0.7mm & soffit cleat 37X25X1.80mm thick including dismantling of wll and ceiling boards of any thickness with cover fillets complete all as specifed and directed. (Make -: Everest / Armstrong/Techno Ceiling Product) 82 S&F hanger of4mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40mm x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed (Make -: Everest) 83 S&F Non asbestos fibre cement building boards 4 mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specifed and directed.(Make -: Everest / Armstrong/Techno Ceiling Product) 84 Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittingsetc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.Note- (i) Dismantled serviceable light fitting shoud be kept in safe custodyfor reuse.(ii) Refixing of serviceable fitting shall be paid seperately under relevant items- 85 Refixing of serviceable light fittings upto 22 watt obtained form item No 84 above including connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified and directed. 86 Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same and depositedto MES store and will installed after completion of work. complete all as specified and directed. 87 Taking down old and unserviceable sub main wiring any size/type /core incl earth wire complete with batten conduit etc complete all as specifed and directed. 88 Taking down old and unsv sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connectionand making good the disturbed surface complete all as specifed and directed. 89 Refixing of serviceable MCBs 5-32 Amp rating 240 Volt 10 KA including connection and commissioning including providing lugs and thimbles complete all as specifed and directed. 90 M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt gradein non metallic rigid PVC concelled conduit medium grade 25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front coverplate & back plate for mounting modular type switches /socket/fan/ regulator etcincluding provision of one single corePVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dollyswitch board complete for following-Make of Cable- Plaza/Finolex/Havells/Polycab. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex.One light/fan point controlled by one switch SP 5 Amps ,240 V 91 One 3 pin 5 amps switch socket outlet point on independent board complete all as specifed and directed. 92 Ditto all as per item No 90 above but for One 3 pin 5 amps socket point on same board complete all as specifed and directed. 93 Ditto all as per the item No 90 herein before but with 2.5 sqmm conductor for5 pin 15 Amps switch socket outlet. complete all as specifed and directed. 94 S&F switch modular type 1 module single pole, one way 5 Amps complete all as specifed and directed.Make - Goldmedal/cabtree(havells)/ABB 95 S&F switch modular type 1 module single pole, one way 15 Amps. Complete all as specifed and directed.Make - Goldmedal/cabtree(havells)/ABB 96 S&Fsocket outlet 2 in 1, 5 pin, 15Amps modular type 2 module complete all as specifed and directed.Make - Goldmedal/cabtree(havells)/ABB 97 S&F socket outlet 5Amps modular type 2 module complete all as specifed and directed.Make - Goldmedal/cabtree(havells)/ABB. 98 M&L ceiling rose,PVC/polycarbonate, isolated body complete all as specifed and directed. 99 S&F Submain wiring with two single core PVCinsulated FRLS multistrand copper conductor cable of size 10Sq mmdrawn into and including non metallic heavy duty rigid concealedPVCcondute not less than 25mm size ISI marked ivory colour (Pressfit or similar brand ) with allfittings / accessories and 10Sq mm FRLS multistrand copper conductorcable as continuous earth wire complete. Not:- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one lengthandconduit and its accessoriesis deemed to be included in the quoted unit rate for this items.)Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex 100 S&F Submain wiring with two single core PVCinsulated FRLS-H multistrand copper conductor cable of size 04 Sq mmdrawn into and including non metallic medium duty rigid concealedPVCcondute not less than 25mm size ISI markedwith allfittings / accessories and 04 Sq mm FRLS-H multistrand copper conductorcable as continuous earth wire complete. Make- Polycab/Havells/RR kables/plaza (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one lengthandconduit and its accessoriesis deemed to be included in the quoted unit rate for this items.)Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex 101 S&Fsheet metal enclosure double door (MCCB DB) three phase and neutral with 200 Amps rated bus bar VTPN,4 way vertical type, with provision of MCCB incommer, AC, 415 Voltcomplete all as specified & directed.Make :- Havells / Legrand /Seimens/L&T / C&S. 102 S&F Sheet metal enclosure 12 way double door distribution board when MCB to be used SPN 240 volt sheet complete all as specified and directed.Make :- Havells / Legrand /SeimensL&T/ C&S. 103 S&F MCCB 4 pole 100 / 125 Amp 415 volts 50 HZ25 KA breakingcapacity complete all as directed.Make :- Havells / Legrand /Seimens L&T/ C&S. 104 S&FMCB SPN 40 to 63 Amps 240 volt,50 hz,10 KA breaking capacity :C curved type complete all as specified and directed. Make :- Havells / Legrand /Seimens L&T/ C&S. 105 S&F MCBsingle pole, 6 to 32Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand /SeimensL&T/ C&S. 106 S&F socket outlet 5 pin 20 amp modular type 2 module with suitable size of module metal flux boxes and including modular front cover plate and back plate for mounting modular type switch & socket with one single poleone module MCB of 20 amp including electrical connection all as specified and directed.Make-Havells/ABB/Goldmedal L&T/ C&S. 107 S&F in LED light fittings 1x18/20 watt ,220 volt AC decorative box type with driver holder including 18 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified and directed .Make - Phillips/Havells/Bajaj L&T. 108 S&Fin square recessed / surface/suspendedmounting LED ceiling light with extruded aluminium housing and milky diffuser of 36 W 2X 2panel complete with LED driver 240 V ,50 Hz,3600 lumen 6500 k complete all as specified & approved by EIC Make - Phillips/Havells/Bajaj/ L&T. 109 S&F in LED security light 60 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipebend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed.Make - Phillips/Havells/Bajaj/ L&T. 110 Supplying, laying, commissioning & testing LT underground cable 1100 volts grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi stranded aluminium conductor all as per IS 7098(Part-I) 1998, laid in trenches, ducts, pipes or on poles etc including cable gland, cable lugs, jointing, supporting clamp complete etc of the type and sizes50 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.Make : Plaza/ Finolex / Polycab /RR cable/ Havells 111 Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed. 112 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soilcomplete all as specified and directed. 113 Removing excavated materials (soil) n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. 114 M&L for sand cushioning to underground cable with clean dry river sand complete all as specified and directed. (Note:- Punned thickness only shall be measured & Paid). 115 M&L for precast cable cover class LV type 1 flat size 250mm x 150mm x 40mm, laidflat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as specifed and directed. 116 M&L for Horizontal boring in soft/loose soil/under roads of any width by manual arrangements for inserting GI pipe up to 100mm bore for passing cables complete all as specified and directed by Engr-in-Charge. Note : GI pipe shall be measured and paid separately under relevent items given here-in-after. 117 M&L for 80mm dia steel tubing, galvanized light grade bores, for passing LT/HT cable under road or PCC floor or fixed on wall/on pole or drain etc or whenever protection is required including necessary clamps and nut bolts with GI fitting complete all as directed and specified and directed.Make -Jindal/Tata/Finolex /Prakash Surya. 118 S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 250 mm. complete all as directed and specified and directed.Make:- Havells/Philips/crompton/Bajaj/ L&T. 119 Supply installation and testing of wall mountedAir circulator 400 mm sweep with high speed and aerodynamically designed Acrylonitrile Butadienealuminium blades / body, jerk free and smooth oscillation and inbuilt regulator system chord complete all as specified and directed. Make:- Havells/Philips/crompton/Bajaj/L&T. 120 M&L forflame proof pointwiringwith two single core FRLS-H PVC insulated& PVC unsheathed multi stranded copper conductor cable of size 1.5Sqmm1100 voltsgradein and includingstove enamelled steel conduit of size20 to 25 mmwith all accessories and one single core PVC insulated & PVC sheathed multistranded FRLS-H copper cable of size 1.5 Sqmm 1100 Voltsgradeas earthcontinuityconductorconnectedto commonearth dolly, switch board complete incuding cutting chesses on wall/ floour/ ceiling etc. & making good the disturbed surface with 1:4 cement morter all as specified for one light / fan point controlled by one 5 Amps flameproofswitch one way complete all as specifed and directed. 121 Supply and fixing LED Light Fitting 2x20 Watt flame proof ,CMRI certified recommended for gas/vapour group of IIA &III B ,zone 1 and 2 and IP 65 Protection with die cast alluminium housing with heat resistant toughned glass with LED tube light, fixtures, driver holders ,connectors etc complete with all accesories prewired and including connecting with three core flexible copper conductor cable with suitable sizecomplete all as specified and directed. Make:- Philips/ Bajaj/ Crompton/ Bajaj/ L&T. 122 S&F flame proof metallic body exhaust fan single phase 230 Volt 50 Hz 300 mm 1440 RPM with louvers and shutter including civil work i.e making of holes and complete with all fixing accessories all as specified and directed by E-in-Charge . Make :- Shyam / Bajaj/ Crompton/ Bajaj/ L&T. 123 M&L for switch flame proof rotory type with termination box in LM 6, 16 A,single phase 250 volts,complete all as specified and directed.Make- Legrand/ Scimens/Havells/ L&T/ C&S.
