|
| 1 | Repairs to potholes any depth, not exc 01 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, path etc cutting around edges to at least 25 mm in depth, making good by applying tack coat of 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.80 Kg per 10 Sqm, blinded with 0.09 cum of stone chipping 63 mm size and again well rammed (including supply of premixed macadam, binder and chipping), depth of pot holes exceeding 30 mm complete all as specified and directed. |
| 2 | M&L for premix bituminous macadam laid/rolled and compacted to required gradient and camber consodidated thickness 50 mm (average thickness) with paving bitumen any peneteration to on existing surfaces, depression on the existing surface and to provide proper camber on road with hot mix bituminus macadam with 4.5% binder content by weight spreading with mechanical paver and compacting paver and compacting with mechanical/ vibratory roller etc and super elevation uniform and smooth surface complete all as specified and directed. |
| 3 | Preparing existing black top surfaces, by brushing with wire brushes for removing caked mud etc, sweeping with brooms finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed. |
| 4 | Appllying evenly a priming/ tack coat with paving bitumen (VG-10) at 5 Kg per 10 Sqm over bituminous surfaces complete all as specified and as directed. |
| 5 | M & L for Bituminous premix carpet (VG-30) 30 mm consodidated thickness with 0.41 cum of stone chipping mixed with 21.90 Kg of binder using paver, rolled and compacted to required camber and gradient completed all as specified and directed. |
| 6 | Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land completed all as specified and directed. |
| 7 | M&L for cement concrete work in pavement/hard-standing of flexurel strength 40 kg/per square centimeter in field using 400 kg of cement per cubic meter, thickness of concrete 25 cm or less and finishing surface of concrete roads, pavements by brooming including necessary formwork complete all as specified and directed. |
| 8 | Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed. |
| 9 | M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in fdn filling mass concrete, complete all as specified and directed. |
| 10 | M&L Forming 12 mm thick expansion joints (Thickness of concrete slab 150mm) filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ (rate including for any extra formwork if required to form joints) complete all as specified and directed. |
| 11 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide Grade B , filled with sealing compound (rate including for any extra formwork if required to form joints) complete all as specified and directed. |
| 12 | M&L for preparation of bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrow etc, and the like n.exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 32162-1989 with special applicator machine all as per manufacturers instruction complete all as specified and as directed. |
| 13 | Supply & fix metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm hight duly powder coated and thermoplastic elastomer 3bands of green ,red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 X150 X 300mm ) type B1 and necessary earth work complete all as specified and as directed. |
| 14 | S & F Convex mirror made up of PC materials having clear & definite mirror image, 130 degree of viewing angle of size 1000mm dia, provided on MS pipe 40 mm dia, 1.2 M long duly powder coated, embedded on PCC block 1:3:6 Type C-2 including necessary excavation and earthwork, complete all as specified and directed. |
| 15 | Supply & fix solar cat eye aluminium alloy shall (100% waterproofing design according to 65) of size 125mm x 125mm x25 mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargeable battery (1.2v/1600 MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufactures instructions etc, complete all as specified and directed. |
| 16 | S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
