Tender For Repair And Polishing To Wooden Furniture At Af Station Gwalior, gwalior-Madhya Pradesh

Tender For Repair And Polishing To Wooden Furniture At Af Station Gwalior; 1 REPAIR TO TABLE CENTRE. M&L for repair & replacement with new ones of the following components Table Centre withoutdisturbing the other components including tightening of frame by using sikanja on drg complete all as specified and directed. DRG NO:FD-274, FD-375, FD-235, FD-29. 2 Table Top made of MDF board 18/19mm thick withone sidedecorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading. Make of MDF Board : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 3 Legs made of teak wood as per drg 4 Side Rail of teak wood as per drg. 5 Polishing old & new surface of table centre after repair with French polishall as shown on drg . 6 Repair to table Dining 8 Pers).M&L for repair & replacement of the following components of table of size (1800x900 mm) without disturbing the other components including tightening of frame shown on drgs complete all as specified and directed.DRG NO:FD-239, 30(M), 273, 376. 7 Table Top made of MDF board 18/19mmthick withone sidedecorative choice lamination and other side balancing white lamination confirm to ISI Markedduly covered with all round 6 mm thick teak wood beading. Make of MDF : CENTURY/ACTION TESA//GREEN PLY. 8 Legs made ofteak wood as per drg. 9 Long Rail made of Teak Wood as per drg. 10 Short Rail made of Teak Wood as per drg. 11 Polishing old and new surface of table after repair with French polish including preparation of surface complete. 12 Repair to tableDining 6 Pers.M&L for repair & replacement of the following components of table of size (1500x900 mm) without disturbing the other components including tighting of frameshown on drg complete all as specified and directed. 13 Top made of MDF board 18/19mmthick with one side decorative choice lamination and other side balancing white lamination confirm to ISI markedduly covered with all round 6 mm thick teak wood beading.Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 14 Legs made of Teak Wood as per drg. 15 Long Rail made of Teak Wood as per drg. 16 Side/Short rail made of Teak wood as per drg. 17 Polishing old and new surface of table after repair with French polish including preparation of surface complete. 18 BED PLY TOPM & L for repair & replacement of the following part without disturbing the other component incl tightining of frameshown on drg complete all as specified and directed.DRG NO:FD-246. 19 S&F 1 st class teak wood (M.P.) head board side legs as per existing shape & size and as specified and shown on drg. 20 S&F 1 st class teak wood (M.P.) foot board side legs as per existing shape & size and as specified and shown on drg. 21 S&F 1 st class teak wood (M.P.) long rail as per existing shape & size and as specified and shown on drg. 22 S&F 1 st class teak wood (M.P.) short rail as per existing shape & size and as specified and shown on drg. 23 S&F 1 st class teak wood (M.P.) stiffeners as per existing shape & size and as specified and shown on drg. 24 S&F head board made out of 19 mm th block board with 4 mm th teak face ply on both faces with tw beading at both faces and top as per existing shape, size & position and as specified and shown on drg. Make of block board and ply -Kit Ply/Greenply/Century. 25 S&F foot board made out of 19 mm th block board with 4 mm th teak face ply on both faces with tw beading at both faces and top as per existing shape, size & position and as specified and shown on drg. Make of block board and ply -Kit Ply/Greenply/Century. 26 S&F .15x3x80 F.I. bracket as per existing shape & size and as specified and shown on drg. 27 S&F 12 mm th commercial ply as bed top as per existing shape & size and as specified and shown on drg. Make of ply - Kit Ply/Greenply/Century. 28 Polishing old surfaces with one coat and new surfaces with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified, directed and as shown on drg. 29 BED HARDM & L for repair & replacement of the following part without disturbing the other component incl tightining of frameshown on drg complete all as specified and directed. DRG NO:FD/E6/MAP/08 30 S&F head board made out of 18/19 mm th both side MDF board with pvc edging as per existing size & as specified and shown on drg.Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 31 S&F foot board made out of 18/19 mm th both side MDF board with pvc edging as per existing size & as specified and shown on drg.Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 32 S&F 12 mm th commercial ply as bed top as per existing shape & size and as specified and shown on drg Make of ply - Kit Ply/Greenply/Century. 33 Repair to components such as removing dents, bents and refixing of existing MS legs, frame, steffeners, rails, FI strips etc by welding/tightening as per existing and making it serviceable all as specified and directed by engr-in-charge. 34 M&L for preparation of painting to Bed Hard by applying two coat of black synthetic enamel panit over a caot of red oxide primer on repaired MS surfaces and one coat of black synthetic enamel paint over old surfaces complete all as specified and directed by engr-in-charge. 35 Removing of unserviceable shoes andS/F new rubber shoes as approved as per sample 36 CHAIR DINNING CUSHIONED LONG BACK. M & L for repair & replacement of the following part without disturbing the other component incl tightining of frameshown on drg complete all as specified and directed.DRG NO:FD/E6/MAP/10 & Spl 37 Teak wood strips 04 Nos. size 15x30x500 mm shall be provided to strength of back side support. 38 S&F of Teak wood rail for sides 65x25x450 mm 39 S&F of Teak wood back legs 25x40x900 mm 40 S&F of Teak wood stiffener of 20x25x450 mm 41 S&F of Teak wood wooden stopper 20x50 mm 42 S&F of Teak wood front leg 30x40x400mm 43 S&F of 75 mm THK 32 Density foam with leatherite upholstry. Make of foam Sleepwell/Rajfoam 44 S&F of 12 mm thick BWR phenol bonded plywood 45 S&F of Nylon Buffre 46 Polishing old and new surface of chair Dining long back after repair with French polish including preparation of surface all as shown on drg and directed by Engr-in-Charge 47 Repair to Chair dining / CBB.M&L for repair & replacement of the following components of chair diningwithout disturbing the other components including tighting of frame shown on drgcomplete all as specified and directed.DRG NO:FD/16(M), FD-203, FD-228, FD-279. 48 Back leg (Teak Wood) left/right 49 Front leg (Teak Wood) left/right 50 Side rail (Teak Wood) with holes for cane weaving, spacing of holes shall match with the existing rail on the other side(left/right) 51 Front/back rail(Teak Wood) with holes which shall match with the holes of existing rail on the other side 52 Back strip (Teak Wood) 53 Stiffener(Teak Wood) 54 Polishing old and new surface of chair dining after repair withpolish including preparation of surface all as shown on drg and directed by Engr-in-Charge 55 Recaning shall be done with 2mm wide plastic cane half round and 4mm wide plastic cane half round for lining around.The canning shall be Standered pattern and as per approval of Engineer-In-Charge. 56 Repair to Chair Wooden bottom W/O Arm. M&L for repair & replacement of the following components of chair wooden bottom w/o armwithout disturbing the other components including tighting of frame shown on drg complete all as specified and directed.DRG NO:FD-225, FD-285. 57 S&F ply wood commercial type 6mm thick BWR Make-Kit Ply/Greenply/Century for seat with perforation 58 Back leg (Teak Wood ) left/right 59 Front leg (Teak Wood) left/right 60 Side rail (Teak Wood) left/right 61 Front/back rail(Teak Wood) 62 Wooden back strip (Teak Wood) 63 Stiffener(Teak Wood) 64 Polishing old and new surface of chair wooden bottom w/o arm after repair with French polish including preparation of surface all as shown on drg and directed by Engr-in-Charge 65 Repair to chair writing/chair office. M&L for repair & replacement of the following components of chair writing/chair officewithout disturbing the other components including tighting of frameshown on drg complete all as specified and directed.DRG NO:FD-148(M), FD-271/88, FD-280, FD-20(M), FD271/88, FD-280 66 Back leg (Teak Wood) left/right 67 Front leg (Teak Wood) left/right 68 Side rail (Teak Wood) with holes for cane weaving, spacing of holes shall match with the existing rail on the other side(left/right) 69 Front/back rail(Teak Wood) with holes which shall match with the holes of existing rail on the other side 70 Back strip (Teak Wood) 71 Arm rest (Teak Wood) 72 Stiffener (Teak Wood) 73 Polishing old and new surface of chairafter repair with French polish including preparation of surface all as shown on drg and directed by Engr-in-Charge 74 Recaning shall be done with 2mm wide plastic cane half round and 4mm wide plastic cane half round for lining around.The canning shall be Standered pattern and as per approval of Garrison Engineer. 75 Repair to Chair dining JCO/ORS.M&L for repair & replacement of the following components of chair dining (JCO/ORs) without disturbing the other components including tighting of frame shown on drg complete all as specified and directed.DRG NO:FD/MAP-II/05. 76 Back leg (30x55) (Teak Wood) left/right 77 Front leg (30x55) (Teak Wood) left/right 78 Side rail (Teak Wood) left/right 79 Front/back rail(Teak Wood) 80 Back strip (45x15 out of 45x35) (Teak Wood) 81 Stiffener (20x25)(Teak Wood) 82 Polishing old and new surface of chair dining after repair withpolish including preparation of surface all as shown on drg and directed by Engr-in-Charge 83 Refixing of PVC sheet 4 mm thick with holes and screwed with frame. The PVC Sheet shall be Standered pattern and as per approval of Engineer-In-Charge. Make : Cello/Amko 84 Nylon Buffer of Front/back leg. 85 CHAIR EASY M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame shown on drg complete all as specified and directed.DRG NO:FD-229, 17 86 S&F 1 st class teak wood (M.P.) back legs left/right as per existing and as specified and shown on drg. 87 S&F 1 st class teak wood (M.P.) front legs left/right as per existing and as specified and shown on drg. 88 S&F 1 st class teak wood (M.P.) side rail with holes for can weaving, spacing of holes shell match with the existing rail on the other side (left/right) as per existing and as specified and shown on drg. 89 S&F 1 st class teak wood (M.P.) front/back rail with holes for can weaving, spacing of holes shell match with the existing rail on the other side (left/right) as per existing and as specified and shown on drg. 90 S&F 1 st class teak wood (M.P.) back strip side rail with holes for can weaving, spacing of holes shell match with the existing rail on the other side (left/right) as per existing and as specified and shown on drg. 91 S&F 1 st class teak wood (M.P.) back strip uppeer/lowerrail with holes for can weaving, spacing of holes shell match with the existing rail on the other side (left/right) as per existing and as specified and shown on drg. 92 S&F 1 st class teak wood (M.P.) Arm rest left/right as per existing and as specified and shown on drg. 93 S&F 1 st class teak wood (M.P.) stiffener as per existing and as specified and shown on drg. 94 Polishing old surfaces with one coat and new surfaces with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified, directed and as shown on drg. 95 Recaning shall be done with 2mm wide plastic cane half round and 4mm wide plastic cane half round for lining around. The canning shall be Godrej pattern and as per approval of Engineer-in-charge 96 TABLE BED SIDE COMPRISING FOLLOWING REPAIRS/ REPLACEMENT M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame shown on drg complete all as specified and directed.DRG NO:FD-276. 248 97 S&F of shelves made out of 18/19mm thick MDF commercial as per drg. Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 98 S&F of sides made of 18/19mm thick MDF Board as per drg 99 S&F of back made of 6mm plywood commercial as per drg. 100 Tightning of all loose components and Polish to complete Table Bed side 101 TABLE BED SIDE COMPRISING FOLLOWING REPAIRS/ REPLACEMENT M & L for repair & replacement of the following part without disturbing the other component incl tightining of frame shown on drg complete all as specified and directed.DRG NO:FD/E6/MAP/15 102 S&F of drawer units made out of 18/19mm thick MDF commercial as per drg. Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 103 S&F of sides made of 18/19mm thick MDF board as per drg 104 S&F of back made of 18/19 mm plywood commercial as per drg. 105 S&F acrylic Knobs/handle as approved for drawers as per sample. 106 Repair to table Diningof size 1200 X 900X760.M&L for repair & replacement of the following components of table Diningwithout disturbing the other components including tighting of frame shown on drg complete all as specified and directed.DRG NO:FD-273 107 Top made of MDF board 18/19mmthick with one side decorative choice lamination and other side balancing white lamination confirm to ISI marked duly covered with all round 6 mm thick teak wood beading. Make of MDF : CENTURY/ACTION TESA/ANCHOR/ GREEN PLY. 108 Legs made of Teak Wood. 109 Long Rail made of Teak Wood as per drg. 110 Polishing old and new surface of table Dining of size 1200 x 900 x 760mm after repair with French polish including preparation of surface complete. 111 REPAIRS TO TABLE 900 MM X 900MM. M & L for repair & replacement of the following components of table 3’ x 3’ without disturbing the other components including tightening of frame shown on drg complete all as specified and directed.DRG NO:FD-291 112 Top made of MDF board 18/19mmthick withone sidedecorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading. Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 113 Legs made of Teak Wood as per drg 114 Stiffener made of Teak Wood as per drg. 115 Polishing old & new surface of table with French polish incl surfaces all as shown on drg and as directed. 116 REPAIR TO TABLE 3’ X 2’ WITH DRAWER .M&L for repair & replacement of the following components of table 3’x2’with drawer disturbing the other components including tightening of frame by using sikanjashown on drg complete all as specified and directed.DRG NO:FD-224, 283 117 Top made of MDFboard 18/19mmthick withone sidedecorative choice lamination and other side balancing white lamination confirm to ISI Markedduly covered with all round 6 mm thick teak wood beading. Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 118 Legs made of teak wood as per drg 119 Stiffer of teak wood as perdrg. 120 Removing U/S drawer. S & F new drawer unit with as per kow Drawing without disturbing to other component all as directed. 121 Polishing old & new surface of table 3x2 with drawer after repair with polishall as shown on drg . 122 REPAIR TO TABLE 3’ X 2’ WITHOUT DRAWER . M&L for repair & replacement of the following components of table 3’x2’with drawer and withoutdisturbing the other components including tightening of frame by using sikanja shown on drg complete all as specified and directed.DRG NO:FD-223, 284, 55 123 Top made of MDF board 18/19mmthick withone sidedecorative choice lamination and other side balancing white lamination confirm to ISI Marked duly covered with all round 6 mm thick teak wood beading. 124 Legs made of teak wood as per drg 125 Stiffer of teak wood as per drg. 126 Polishing old & new surface of table 3x2 without drawer after repair withpolishall as shown on drg . 127 REPAIR OF PEG TABLE.M&L for repair & replacement of the following components of peg tabledisturbing the other components including tightening of frame by using sikanja shown on drg complete all as specified and directed.DRG NO:FD-284 128 Top made of MDFboard 18/19mmthick withone sidedecorative choice lamination and other side balancing white lamination confirm to ISI Markedduly covered with all round 6 mm thick teak wood beading. Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 129 Legs made of teak wood as per drg 130 Side Rail of teak wood as perdrg. 131 Polishing old & new surface of peg tableafter repair with polishall as shown on drg . 132 TABLE DRESSING LADIESM & L for repair & replacement of the following part without disturbing the other component incl tightining of frame shown on drg complete all as specified and directed.DRG NO:FD-251 133 S&F 1 st class teak wood (M.P.) legs as per existing shape & size and as specified and shown on drg. 134 S&F 1 st class teak wood (M.P.) short stiffeners as per existing shape & size and as specified and shown on drg. 135 S&F 1 st class teak wood (M.P.) long stiffeners as per existing shape & size and as specified and shown on drg. 136 S&F 19 mm th teak wood veneered (one side) MDF board at bottom of table as per existing and as specified and shown on drg. Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 137 S&F 12 mm th teak wood veneered (one side) ply wood at back of table as per existing and as specified and shown on drg. Make - Kit Ply Greenply/Century. 138 S&F 19 mm th teak wood veneered (one side) MDF board at sides of table as per existing and as specified and on drg.MDF Make: CENTURY/ACTION TESA/ANCHOR/GREEN PLY 139 S&F 19 mm th MDF board phenol bonded at table top with plastic laminated sheet 1.5 mm th fixd on one side as per existing and as specified and shown on drg.Make of MDF : CENTURY/ACTION TESA/ANCHOR/GREEN PLY. 140 S & F drawer unit as per existing without disturbing to other componentas specified and shown on drg. 141 S & F Aluminium anodised chromium plated knobs as specified and shown on drg as per sample. 142 S & F 5.5 mm th sliding glass shutters with aluminium channels complete as specified and shown on drg. 143 S&F 1 st class teak wood (M.P.) verticle member of mirror frame as per existing and as specified and shown on drg. 144 S&F 6 mm th ply wood commercial back of mirror frame as per existing and as specified and shown on drg. . Make - Kit Ply/Greenply/Century. 145 S&F 5.5 mm th mirror with 25x19 TW beading around mirror as per existing and as specified and shown on drg. . Make - Modigaurd/Swastik. 146 Polishing old surfaces with one coat and new surfaces with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified, directed and as shown on drg. 147 TEAPOY WOODEN COMPRISING FOLLOWING REPAIRS/REPLACEMENTM & L for repair & replacement of the following part without disturbing the other component incl tightining of frame shown on drg complete all as specified and directed.DRG NO:FD-278/ FD-232 148 S&F of legs made os 1st class teak wood (MP) as per drg. 149 S&F of long rails made of 1st class hard teak wood (MP) as per drg. 150 Top made of MDFboard 18/19mmthick withone sidedecorative choice lamination and other side balancing white lamination confirm to ISI marked duly covered with all round 6 mm thick teak wood beading. Make of MDF : CENTURY/ACTION TESA/ANCHOR/ GREEN PLY. 151 Polish to complete Teapoy wooden

INR 500 /-

INR 35 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB