Tender For Repair/ Maintenance Of All Types Of Pumps And Motors ,Fountains,Cleaning Of Oht/Ug Sumps And Other Misc Items At Wac Area Under Ge (Af) Subroto Park; 1 Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall refixed the oldtiles as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately 2 Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm Each layers complete all as specified and as directed by Engineer-in-charge 3 Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge 4 Supply and fixingin replacement of unserviceable sluice valve cast iron with brass spindle PN-1.6 long body type and fly nut flanged both ends and drilled for jointing wheel head type confoRMing to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 250mm bore pipe as in repairs and ISI marked complete all as specified and as directed. 5 All as per above item No 4 here-in-before but 200mm bore 6 All as per above item No 4 here-in-before but 150mm bore 7 All as per above item No 4 here-in-before but 100mm bore 8 All as per above item No 4 here-in-before but 80mm bore 9 Supply and fixingin replacement cast iron non return valve flanged end confoRMing to IS 5312 of size 80mm dia complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge. 10 All as per above item No 9.00 here-in-before but 100mm dia 11 All as per above item No 9.00 here-in-before but 150mm dia 12 All as per above item No 9.00 here-in-before but 200mm dia 13 Supply and fixingin replacement of unserviceable jointing to cast iron pipe of size 250mm bore spigot and socket by run lead joints including spun yarn and caulking of lead joints complete all as specified and as directed by Engineer-in-charge 14 All as per above item No 13 here-in-before but 200mm bore 15 All as per above item No 13 here-in-before but 150mm bore 16 All as per above item No 13 here-in-before but 100mm bore 17 All as per above item No 13 here-in-before but 80mm bore 18 Taking out existing GI pipe 100mm dia from trenches / walls / roof / floor etc including connection and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge 19 All as per above item No18.00 here-in-before but size 80mm bore 20 All as per above item No18.00 here-in-before but size 50mm bore 21 All as per above item No18.00 here-in-before but size 40mm bore 22 All as per above item No18.00 here-in-before but size 25mm bore 23 All as per above item No18.00 here-in-before but size 20mm bore 24 All as per above item No18.00 here-in-before but size 15mm bore 25 Supply and fixingGI tubing medium grade 100mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge. 26 All as per above item No 25.00 here-in-before but size 80mm dia bore 27 All as per above item No 25.00 here-in-before but size 50mm dia bore 28 All as per above item No 25.00 here-in-before but size 40mm dia bore 29 All as per above item No 25.00 here-in-before but size 25mm dia bore 30 All as per above item No 25.00 here-in-before but size 20mm dia bore 31 All as per above item No 25.00 here-in-before but size 15mm dia bore 32 Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line of 40 to 50mm bore with new fittings and fixtures complete all as directed by Engineer-in-charge 33 All as per above item No 32.00 here-in-before but size 80 to 100 mm dia bore 34 Supply and fixingin replacement of unserviceable gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50mm dia complete all as specified and as directed by Engineer-in-charge. 35 All as per above item No 34.00 here-in-before but size 32 /40mm dia bore 36 All as per above item No 34.00 here-in-before but size 25mm dia bore 37 All as per above item No 34.00 here-in-before but size 20mm dia bore 38 All as per above item No 34.00 here-in-before but size 15mm dia bore 39 Supply and fixing in replacementbrass butterfly valve class PN-1.0 of size 50mm diacompleteall as specified and directed . 40 Supply and fixing in replacementbrass butterfly valve class PN-1.0 of size 40 mm dia complete 41 Supply and fixing in replacementbrass butterfly valve class PN-1.0 of size 25mm diacomplete 42 Supply and fixing in replacementbrass butterfly valve class PN-1.0 of size 20mm diacomplete 43 S&F in replacement gun metal non return valve of size 15mm bore 44 S&F in replacement gun metal non return valve of size 20mm bore 45 S&F in replacement gun metal non return valve of size 25mm bore 46 S&F in replacement gun metal non return valve of size 40mm bore 47 S&F in replacement gun metal non return valve of size 50mm bore 48 Supply and fixingin replacement of unserviceable PVC bib tape 15mm dia complete all as specified and directed. 49 Supply and fixingin replacement of unserviceable PVC PTMT float valve 20/25 mm dia complete with PVC ball and connecting rod complete all as specified and directed. 50 Supply & Fixing In Replacement Of Water Meter 150mm Bore Including Rubber Packing Sheets, Nuts, Bolts Etc complete all as specified and directed. 51 M&L Brick work with sub-class B bricks straight on plan built in CM 1:4 for pipe line supports including demolition of old brick work complete all as specified and directed. 52 M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate built in CM for copping pipe liner support 53 M&L for PCC foundation 1:2:4 type B-2 (using 40mm graded stone aggregate)complete all as specified and directed. 54 M&L for plastering work 15mm thick on fair faces of brick work on concrete surfaces in 1:4 cement mortar for pillar supports 55 Making good for road to existing surfaces with using of patch premix bitumenous 25mm thick polymer based material over WBM 75mm thick including rolling etc all as specified and as directed by Engineer-in-charge 56 M & L for earthing in rocky area by usingBurnished metal copper earthing electrode 50mm dia 3 Mtr long with strip teRMinal 40x5mm, 90mm length with 2 holes of10mm with the pipe thickness of 1.2 mm non exotheRMic welding, inner electrode 16mm solid rod, filled with highly conductive compound non corrosive non hydroxylation Inclusive of 2 bag of Chemical earthing electrode 50 kgs, 25kg bag Each with the chemical composition Carbon as graphite 80%, AI203 18-32%, FE203 4-11%, CALCIUM,CARCBON, COPPER 10 to 15 %. Moisture Content 1.06%, chloride 300ppm, cadmium not detected, antimony 100pm to ensure resistance value less than 5 ohm all as specified and directed. Note: (i) The rate quoted for above includes all necessary materials, T& P for excavation etc for achieving the desire result of less than 5 ohm.(ii) Earth pit chamber, cover and marking also included in the unit quoted rate of item.(iii) Earthing shall be carried out through OEM only. 57 M&L for earth continuity conductor of size 25mmX4 mm galvanised strip strip fixed on walls / burried in ground with and including fixing arrangments on walls like porcelain insulators screws washers etc complete all as specified and as directed by Engineer-in-charge 58 M&L for Construction of brick masonary valve pit of size 100cmx100cmx100cm (internal dimensions of chamber) depth to be reconed from the top of PCC in foundation to top of MS cover with MS sheet cover 3.15mm thick including frame of angle iron 40x40x6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in CM 1:6 15mm thick plastering in CM 1:4 (internal & external) and necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to a distance not exe 50 mtrs 150mm thick PCC 1:4:8 type D-2 for base and PCC copying 15mm thick 1:2:4 using 12mm graded aggregate all as specified and as directed by Engineer-in-charge) for upto 250mm dia valve) 59 Supply & fixing in replacement of 100mm CI foot valve complete all as specified and as directed by Engineer-in-charge. 60 Supply & fixingCI air release valve of dia 150mm bore dia complete with all accssories incl taking down old unsv air release valveall as specified and directed by engr in charge. 61 Disconnecting and taking out of existing submersible pump set from borewell capacity 3 to 7.5 HP alongwith their column pipe and submersible cable from bore well from any depth complete all as specified and directed by Engineer-in-charge 62 Lowering the submersible pump set complete with motor and pump capacity 3 to 7.5 HP in bore well and connecting to existing system complete all as specified and as directed by Engineer-in-charge 63 Development of borewell by means of high capacity compressor, compressor capacity not less than 620 CFM at 8 Kg/cmsquare to its optimum yeild till clear water of potable quality free from sand/silt is obtained including draw down performance and yeild test of the tubewells complete all as specified and directed by Engr- In- Charge. 64 Dismantling and strip opening of submersible pump multistage coupled with 3 HP to 7.5 HP submersible motor of any make, segregating of serviceable/unserviceable parts, cleaning of serviceable parts, assemblingpump carefully including replacement of worn-out parts, nut and bolts etc., grinding and polishing of shaft for fixing of bushes neckering bushes, making proper size of keysfor fixing of impeller etc, getting coupled to the pump with motor, testing for rated dischargeof water including transportation to the site for lowering complete all asspecified and directed. Note:- (i) The unit quoted rate included the items required like guide bush,distance sleeves,impeller key , cable guard SS distance sleeves ,guide bush,GM neck ring ,stage ball or any other such itemsrequiredfor pump to make fully functional.(ii) Only item considerd in supply only of this schedule will be paid separetely. 65 Shifting to local work shop and Rewinding of submersible motor after cutting the burnt winding including cleaning slots and rewinding with equivilent gauge (as retrieved) ofinsulated copper winding wire and insulating material I.e PVC sleeves insulation paper , wooden sticks, O ring for 3.0 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge.Note:-(i) The unit quoted rate included the items required like stamping,rotor sleeves,T-bolt,sand guard,coupling ,bearing base plate,bearing ,bush,water cable seal, seal bush& sleeves ,revolving disc etc for motor to make fully functional.(ii) Only item considerd in supply only this schedule will be paid separetely. 66 Supply only impeller of existing material suitable for 3 HP to 7.5 HP submersible pump set complete all as specified and as directed by Engineer-in-charge. 67 Supply only thrust plate suitable forfor 3 HP to 7.5 HP submersible motor 68 Supply only thrust bearing suitable for 3 HP to 7.5 HP submersible motor 69 Supply only Gun metal bearing suitable for 3 HP to 7.5 HP submersible motor 70 Supply only SS rotor sleeves infor 3 HP to 7.5 HP submersible motor 71 Supply only coupling suitablefor 3 HP to 7.5 HP motor 72 Supply only SS pump Shaftfor 3 HP to 7.5 HP submersible pump 73 Supply only housing upper and lower for 3 HP to 7.5 HPsubmersible 74 S&F in replacement GI column pipe 50mm dia heavy duty class C with GI flanged and drilled at both ends duly threaded and welded of 3 mtr long including bolts, nuts, washers and rubber insertions packing complete all as specified and directed by Engineer-in-charge. 75 Dismantling & taking out open well submersible pump sets installed at water storage tank of fountains, pumphouse and booster pump sumps of capacity 2 to 4 HP after disconnecting all electrical connections and refixing the same in its original position after carrying out repairs / rewinding over hauling cleaning of impellers strainers including reconnection of all electrical connections etc complete all as specified and as directed by Engineer-in-charge. Note:- (i) The unit quoted rate included the items required likeguide bush,distance sleeves,impeller,impeller key , cable guard SS distance sleeves ,guide bush,GM neck ring ,stage ball,DOL piece,DOL bush etc for open well pump to make fully functional.(ii) Only impeller and rewinding will be paid separetely . 76 All as per above item No 75.00 here-in-before butof capacity 5 to 7.5 HP 77 All as per above item No 75.00 here-in-before butof capacity 10 to 15 HP 78 All as per above item No 75.00 here-in-before butof capacity 30 HP 79 M&L for transportation of open well centrifugal type submersible pump set of capacity 2.0 HP to 4.0 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick O ring complete all as specified and as directed by Engineer-in-charge.Note:-(i) The unit quoted rate included the items required like stamping,rotor sleeves,T-bolt,sand guard,coupling ,bearing base plate,bearing bush,upper and lower housing,thrust plate and thrust bearing,water cable seal, seal bush& sleeves ,revolving disc etc for motor to make fully functional. 80 All as per above item No 79.00 here-in-before butof capacity 5.0 to 7.5 HP 81 All as per above item No 79.00 here-in-before butof capacity 10 to 15 HP 82 All as per above item No 79.00 here-in-before butof capacity 30 HP 83 Supply only impeller for existing material suitablefor 2 HP to 4 HP open well submersible 84 Supply only impeller for existing material suitablefor 5 HP to 7.5 HP open well submersible 85 Supply only impeller of existing material suitablefor 10 HP to 15 HP open well submersible 86 Supply only impeller of existing material suitablefor 30 HP open well submersible 87 Dismantling & taking out defective parts of monoblock pump set of capacity 0.5 HP to 1.5 HP and refixed after repairs / making complete serviceable by repairing / replacement of defective parts including tranportation to local work shop etc complete all as specified and directed by Engineer-in-charge. Note : -(i)Replacement of defective parts also included in the unit quoted rate.No extra payment shall be given for parts. (ii) Rewinding of motor shall be given seperately. 88 All as per item no 87.00 above but for 2.0 HP to 4.0 HP 89 M&L for rewinding of Booster Pump set of capacity 0.5 Hp to 1.5 HP with same gauge of super enamelled copper winding wireafter cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge 90 All as per item no 89.00 above but for 2.0 HP to 4.0 HP 91 Supply only cooling fan for 0.5 to 4.0 HPmotor 92 M&L Dismantling of unserviceable monoblock / Centifugal pump set, with motor for 5 HP to 7.5 HP, strip opening and taking out or rotor carefully, cleaning of rotor and stator, checking the rotor bearings, pump bearings, gaskets, impeller keys, teRMinal plate, gun metal bushes, cooling fan blades, windings etc., re-assembling the motor including replacement of studs with nuts, retesting of motor winding and motor for full RPMand full discharge water after coupling with pump set complete all as specified and directed.Note : -(i)The unit quoted rate included the items required like bearings ,bearing housing ,shaft sleeve ,suction delivery piece,gland plate,gland packing,mechanical seal ,stuffing bush,gasket,nut stud,eye bolt,seal packing etc for Monoblock/centrifugal pump to make fully functional.No extra payment shall be given for parts. (ii)Only cooling fan, shaft,impeller and rewinding will be paid separetely. 93 All as per item no 92.00 above but for 10.0 HP to 15 HP motor 94 M & L for centrifugal type induction motor of capacity5.0 HP to 7.5 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick O ringincluding refixing in its original position and testing completeall as specified and as directed by Engineer-in-charge. Note : -(i)The unit quoted rate included the items required like bearings ,bearing plate ,coupling key,connectionplate,teRMinal box,fan cover,stamping etc for motor to make fully functional.No extra payment shall be given for parts. 95 All as per item no 94.00 above but for 10.0 HP to 15 HP motor 96 Supply only cooling fan for 5.0 to 7.5 HPmotor 97 Supply only shaft of existing material suitable for 5 HP to 7.5 HP 98 Supply only impeller of existing material suitable for 5 HP to 7.5 HP 99 Supply only cooling fan for 10.0 to 15.0 HPmotor 100 Supply only shaft of existing material suitable for 10.0 to 15.0 HPmotor 101 Supply only impeller of existing material suitable for 10.0 to 15.0 HPmotor 102 M&L Dismantling of unserviceable monoblock / Centrifugal pump set, with motor for 30 HP to 50 HP, strip opening and taking out or rotor carefully, cleaning of rotor and stator, checking the rotor bearings, pump bearings, gaskets, impeller keys, teRMinal plate, gun metal bushes, cooling fan blades, windings etc., re-assembling the motor including replacement of studs with nuts, retesting of motor winding and motor for full RPMand full discharge water after coupling with pump set complete all as specified and directed.NOTE- (i).The unit rate quoted by the contractor shall also include the cost of removing the motor and pump set to perfoRM the works mentioned in this item. (ii) Any parts / spares required to make it fully functional shall be measured and paid for separately under relevant item as supply only. 103 All as per item no 102.00 but for monoblock/centrifugal pump set60 HP to 75 HP 104 M & L for centrifugal type induction motor of capacity30 HP to 50 HP to local work shop and rewinding the motor with equivalent gauge of insulated copper winding wire & insulating materials i.e. PVC sleeves insulation papers wooden stick O ringincluding refixing in its original position and testing complete ( other spares required for motor will be measuerd and paid under relevant item ) all as specified and as directed by Engineer-in-charge. 105 All as per item no 104.00 but for induction motor of 60 HP to 75 HP 106 Supply only shaft of existing material suitable for 30 to 50 HP motor 107 Supply only impeller of existing material suitable for 30 to 50 HP motor 108 Supply only shaft sleeve of existing material suitable for30 to 50 HP 109 Supply only Cast iron bearing housing for 30 to 50 HP motor 110 Supply only Gland assembly suitable for 30 to 50 HP motor 111 Supply only throatbush suitable for 30 to 50 HP motor 112 Supply only mechanical seal suitable for 30 to 50 HP motor 113 Supply onlyshaft coupling suitable for 30 to 50 HP pump set 114 Supply only ball bearing suitable for 30 to 50 HP pump set 115 Supply only roller bearing suitable for 30 to 50 HP 116 Supply only cooling fan for 30 to 50 HP induction motor 117 Supply only shaft of existing material suitable for 60 HP to 75 HP 118 Supply only impeller of existing material suitable for 60 HP to 75 HP 119 Supply only shaft sleeve of existing material suitable for 60 HP to 75 HP 120 Supply only Cast iron bearing housing for 60 HP to 75 HP 121 Supply only Gland assembly suitable for 60 HP to 75 HP 122 Supply only throatbush suitable for 60 HP to 75 HP 123 Supply only mechanical seal suitable for 60 HP to 75 HP 124 Supply onlyshaft coupling suitable for 60 HP to 75 HP pump set 125 Supply only ball bearing suitable for 60 HP to 75 HP 126 Supply only roller bearing suitable for 60 HP to 75 HP 127 Supply only cooling fanfor 60 HP to 75 HP induction motor 128 Dismantling of pressure pump set of Cap 0.5 HP to 1.0 HP from the existing site after disconnecting all electrical connections and refixing the same after carrying out repairs /overhauling of pump including transportation to local work shop & back complete all as specified and as directed by Engineer-in-charge.Note : -(i)Replacement of defective parts also included in the unit quoted rate.No extra payment shall be given for parts.(ii) only Rewinding of motor shall be paid seperately. 129 M&L for rewinding of pressure Pump set of capacity 0.5 Hp to 1.0 HP with same gauge of super enamelled copper winding wireafter cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge.Note : -(i)Replacement of defective parts to made motor functional also included in the unit quoted rate.No extra payment shall be given for parts. 130 S&F in replacement of Air Tank for pressure pump set of capacity 0.5 HP 1.0 HP 131 S&F in replacement of Pressure gauge 0-10 Kg / SqCM 132 S&F pressure control switch suitable for 0.5 HP/1.0 HP pressure pump set 133 S&F in replacement Running Capacitor 10.0 MFD 134 S&F in replacement Running Capacitor 25.0 MFD 135 S&F in replacement Running Capacitor 36.0 MFD 136 S&F in replacement Running Capacitor 50.0 MFD 137 S&F in replacement Running Capacitor 72.0 MFD 138 S&F in replacement Running Capacitor 125.0 MFD 139 S&F In Replacement CIImpeller Assy of Centrifugal mono block Pump set of capacity 0.5 HP to 1.5 HP as per sample (size varies depend upon the make and cap) 140 Supply & Fixing pressure booster pump 1 HP capacity single phase, 50 Hz mounted on roof for boosting water supply to high pressure and connected with existing water supply pipe line including necessary electrical wire and plug top , NRV socket alll as specified and directed by Engr -in-Charge. 141 Supply and fix in replacement Motor Guard( weather protection cover) made out of 18 gauge GI Sheet suitable upto 5 HP centrifugal/ mono block /Pressure pump setwith lifting handle and provision of suction /discharge pipeline Holes complete all as directed. 142 Dismantling & taking out defective parts of self priming recirculationpump set of capacity 3.5 HP and refixed after repairs / making complete serviceable by repairing / replacement of defective parts including tranportation to local work shop etc complete all as specified and directed by Engineer-in-charge. Note : -(i)Replacement of defective parts also included in the unit quoted rate.No extra payment shall be given for parts.(ii) only Rewinding of motor shall be given seperately. 143 M&L for rewinding of self priming recirculation pump of capacity 3.5 HP with same gauge of super enamelled copper winding wireafter cutting the burnt windings cleaning slots including insulating materials PVC sleeves insulation paper wooden stick etc complete all as specified and as directed by Engineer-in-charge 144 S&F in replacement of Phase sequence corrector suitable for 5 HP to 7.5 HP pump complete all as specified and as directed by Engineer-in-charge. 145 S&F in replacement of Phase sequence corrector suitable for 10 HP to 15 HP pump complete all as specified and as directed by Engineer-in-charge. 146 S&F in replacement of DOL startersuitable for 5 HP to 7.5 HP with relay 13-22 Amp complete all as specified and as directed by Engineer-in-charge. 147 S&F in replacement of starterfor submersible pump of capacity5 HP to 7.5 HP complete all as specified and as directed by Engineer-in-charge. 148 S&F in replacement of starterfor submersible pump of capacityupto 4 HP complete all as specified and as directed by Engineer-in-charge. 149 Disconnecting & dismantling of pump set from the foundation breaking the existing defective PCC foundation in any size, shape M&L for PCC 1:2:4 type B-2 using 12.5 mm graded aggregate for foundation of any size of motor pump set from 50 HP to 75 HP capacity pump set and fitting pumping set in position with base frame painted with synthetic enamel black paint complete all as specified and as directed by Engineer-in-charge 150 Material and labour for scrubbing out the rust deposited on the surface of centrifugal/Monoblock pump set of capacity 50 to 75 HP including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Number complete all as specified and directed. 151 Material and labour for scrubbing out the rust deposited on the surface of centrifugal /Monoblock pump set of capacity 5 to 20 HP pump set including its base frame and preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint and marking SM /MES Numbercomplete all as specified and directed. 152 M&L in replacement of Ladder for OHT/ UG sump with square bar,angle iron,channel, Flat Iron and etc welding, drilling, cutting with one primer coat, one under coat and one finishing coat of paint complete all as specified and directed by Engineer in charge. 153 Material and labour for scrubbing out the rust deposited on the surface of water header 12 mtr long including all connecterd inlet and outlet pipesand preparing for applying paint and apply one coat of redoxide primer and two coat of synthetic enamel paint complete all as specified and directed . 154 S&F in replacement of MCCB 400 Amps 4 pole 415 volts 3 phase 50 Hz,Ics=100%Icu , breaking capacity 36 KAcomplete all as specified and directed. 155 S&F in replacement of MCCB 200 Amps 3 pole 415 volts 3 phase 50 Hz ,Ics=100%Icu, breaking capacity35 KA complete all as specified and directed. 156 S&F in replacement of MCCB 160 Amps3 pole 415 volts 3 phase 50 Hz ,Ics=100%Icu, breaking capacity 35 KA complete all as specified and directed. 157 Supply & fix in replacement of MCCB 100 amps 3 pole 25 KA 415 volts 50 Hz,,Ics=100%Icu complete all as specified and as directed by Engineer-in-charge. 158 Supply & fix in replacement of MCCB 125 amps 3 pole 16 KA 415 volts 50 Hz ,Ics=100%Icu complete all as specified and as directed by Engineer-in-charge. 159 Supply & fix in replacement of MCCB 63 amps 3 pole 16 KA 415 volts 50 Hz, Ics=100%Icu complete all as specified and as directed by Engineer-in-charge. 160 Supply & fix MCB TP 415 volt AC of capacity 63 amps complete all as specified and as directed by Engineer-in-charge. 161 Supply & fix MCB SPN of capacity 32 amps complete all as specified and as directed by Engineer-in-charge. 162 S&F in replacement of 3 pole power contactorMNX 50 to 110 or ML-4 with NO/NC block as required at site complete all as specified and directed. 163 S&F in replacement of 3 pole power contactor MNX 40 to 45/ML-3with NO/NC block as required at site complete all as specified and directed. 164 S&F in replacement of 3 pole power contactorMNX 25 to 32 /ML-2 with NO/NC block as required at site complete all as specified and directed. 165 S&F in replacement of 3 pole power contactorMNX upto 18/ML-1.5 with NO/NC block as required at site complete all as specified and directed. 166 Supply & fix Electronic overload relay (Manual reset) relayrange 9-15 amp suitable for direct mounting complete all as specified and as directed by Engineer-in-charge. 167 All as per item no 166.00 but for relay range 28-42 amp 168 All as per item no 166.00 but for relay range 45-75amp 169 All as per item no 166.00 but for relay range 66-110 amp 170 Supply and fix in replacement electronic timer ET-100 240V/415V complete all as specified and as directed by Engineer-in-charge. 171 Supply and fix in replacement amp meter 96 Sqmm digital type 0-100 amps complete all as specified and directed. 172 Supply and fix in replacement volt meter 0-500 volts 96 sqmm digital type complete all as specified and directed. 173 S&F in replacement of dial type FM-1 / QT daily timer one day 24 hrs 240 volt AC complete all as specified and directed. 174 S&F in repair CT 30/5 to 200/5 complete all as specified and directed. 175 S&F in repair indicating light with bulb set of three complete all as specified and directed. 176 S&F in repair PVC copper stranded conductor cable size 16 Sqmm multi stranded single core(3 runs with color coding) 1100 volt grade including copper thimble connecting from panel and motor complete all as specified and directed by Engineer-in-charge. 177 S&F in repair PVC copper stranded conductor cable size 25 Sqmm multi stranded single core(3 runs with color coding) 1100 volt grade including copper thimble connecting from panel and motor complete all as specified and directed by Engineer-in-charge. 178 S&F single phase preventor type VSP-D2 415 volts AC complete all as specified and directed. 179 Supply & fix of monoblock pump single phase 3 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge. 180 Supply & fix of monoblock pump single phase 1 HP capacity 240Volts, 50 Hz AC including fitting in given location with GI fittings and electrical connections with control wire complete all as specified and directed by Engineer -in- Charge. 181 M&L for attending of water supply complaints for any leakage/blockage in GI pipe lines of size 20mm/25mm bore taking up serviceable/unserviceable GI water pipe lines all fittings/fixtures from trench including supply and laying GI tubing 20mm/25mm bore up to 1 mtr length (max) including necesssary cutting, threading and replacement of unserviceable GI fittings such as GI socket /Nipple/union socket / Tee /reducer etc.of size 20mm/25mm including necessary excavation and earth work up to 1 mtr length to repair the leakage / clearing the blockage in the pipe line and testing on completion on ground/wall/floor/roof of the bldg .Note:- GI fittings ,upto 1 mtr length pipe,excavation,returning filling and removalrequired at site also included in the unit quoted rate . 182 All as per item No 181.00 here-in before but of size 40mm /50mm bore GI pipe line 183 All as per item No 181.00 here-in before but of size 80mm /100mm bore GI/CI pipe line 184 Supply and fix in replacementDecrin dozing pump 100 PSI40 GPD Capacity complete all as specified and directed. 185 Supply and fixin replacement FRP TANK suitable for Chlorine dozing system of Capacity 100 LTR with level gauge with agitator Motor ,connection shaft and mixing blade complete 186 Supply in replacement connection pipe suitable for connecting to decrin dosing pump to Header(8 mm internal dia) 187 Supplyand fix in replacement of injector Nozzle of Decrin dozing pump 188 Supply and fix in replacement of PVC pipe 25mm dia 189 S&F in replacement of constant voltage driver of capacity 10 amps 12 Volt complete all as specified and as directed by Engineer-in-charge 190 S&F in replacement of constant voltage driver of capacity 15 amps 24 Voltcomplete all as specified and as directed by Engineer-in-charge 191 S&F in replacement under water light 12 volt LED type 3 watt IP 67 for fountain including angle adjustable stand required for fixing complete allas specified and directed. 192 S&F in replacement under water light 12 volt LED type 5 watt IP 67 for fountain including angle adjustable stand required for fixing complete allas specified and directed. 193 S&F in replacement under water light 24 volt LED type 6 watt multicolour (7 colour) IP 67 for fountain including angle adjustable stand required for fixing complete allas specified and directed. 194 Dismantling of water fountain ring made out of MS / GI pipe of 40 to 80mm dia and refixing the same in its original position after cleaning / repairing like welding work etc complete all as specified and directed by Engineer-in-charge 195 Dismantling of Blocked nozzles fixed on various fountain and refixing after cleaning / servicing and setting by trial and error complete all as specified and as directed by Engineer-in-charge 196 S&F in replacement fountain nozzle (adjustable) of size 12mm /15mm/20mm/25mm complete all as specified and directed. 197 S&F in replacement of Rubber packing ring suitable for under water light fittings complete all as specified and as directed by Engineer-in-charge 198 Supply & fixing in replacement wire netting of stainless steel wire 1.4mm dia size of mesh 12mm fixed to bend pipe dia 100mm to 200mm fixed with GI clamp including nuts and bolts etc complete all as specified and directed by Engineer-in-charge 199 S&F in replacement of angle adjustable stand for luminaries made of SS-304 materials as per Sample for fountains complete all as specified and directed. 200 Scrapping of old painting from complete fountain assembly made of MS / GI / Steel pipe and applying two coats of approved synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge 201 M&L for cleaning of fountain, water body complete with cleaning solutions removing all the sludge /foreign particles from the sump of fountain complete all as specified and as directed by Engineer-in-charge 202 M&L for GI clamps of 32mmx5mm complete with screw 50mm long x 6mm dia complete with drilling the hole with drilling machine with rawl plugs / wooden gutties for fixing / clamping the GI pipes suitable for 50/40mm dia at a interval 01 mtr Each complete by providing necessary scafolding upto the height of 15 mtrs complete all as specified and directed by Engineer-in-charge 203 Supply and fix in replacement PVC water tank cylendrical shape3 layer of capacity 5000 Ltrs complete all as specified and directed. 204 Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 2000 Ltrs complete all as specified and directed. 205 Supply and fix in replacement PVC water tank cylendrical shape 3 layer of capacity 1000 Ltrs complete all as specified and directed. 206 M&L for chemical and bacteriological analysis and potability of water obtained from Delhi Jal Board & various bore wells fromApproved Micro Engineering and Testing Lab and submitting the report in duplicate complete all as specified and as directed by Engineer-in-charge 207 Cleaning of under ground / semi under ground water storage sump of capacity 100000 gallons by tank clean process which is folowing :- (a) Mechanised removal of all remaining dirty water by high capacity submersible pump set (b) Removal of sludge by vacuum operated GeRMan pump (c) Cleaning of walls, ceiling and bottom of tank by GeRMan made high pressure rotary jet 120 bars pressure (d) Removal of all dirty particle by industrial wet vacuum cleaner leaving the tank 99.9% physically cleaned (e) Sterlization of tank by Eco-Friendly biodegradable and highly effective against all pathogens (f) Sterlization of tank atmosphere by industrial UV radiator leaving the tank complete sterlite by Spealized Method. 208 All as per above item No 207.00 here-in-before but underground water storage sump of capacity 2x50000 gallons having two compartments 209 All as per above item No 207.00 here-in-before butsemi-underground water storage sump of capacity 50000 gallons having two compartments 210 All as per above item No 207.00 here-in-before but underground water storage sump of capacity 20000 gallons complete 211 All as per above item No 207.00 here-in-before but underground water storage sump of capacity 35000 gallonscomplete 212 All as per above item No 207.00 here-in-before but underground water storage sump of capacity 10000 gallons complete 213 All as per above item No 207.00 here-in-before but over head water tank of upto 45 mtr staging (Height of OH Tank) of capacity 100000 gallonscomplete all as specified and directed by Engr-in-Charge.NOTE:- All the sluge materials / fungs removed from the underground sump / semi underground sump and over head tanks will be removed from the site to a distance not exceeding 50 mtr and all underground sump / semi underground sump and overhead tanks will be cleaned in all respect upto 3 mtr around the water tanks. The cost of the same shall be deemed included in the respective items. All T&P required for the cleaning of tanks / sumps will be arranged by the contractor. 214 Supply only TCCA-90 (Trichloro cynuric acid) 215 Supply only Soda Ash 216 Supply only Alum 217 Supply only Copper Sulphate (CuSO4) 218 Supply only HCL (Acid) 219 Supply and fixing in replacement of under water light fitting LED 20 watt ,IP 67, 12 Volt round type as per shifting for swimming poolcomplete including water proofing joint complete all asspecified and directed. 220 Supply and fix in replacementmulti fuction valve size 100 / 80 / 63 mm (Filter, Rinse, Waste, Close, Backwash, & Recirculate option in built) including necessary fittings required at site to match with the existing andconnected to as per exisiting sizeand Make for swimming pool complete all as directed . 221 Supply and replacement of suction sweeper PVC pipe 50mm dia complete all as specified and directed. 222 Supply only Test kit for residual chlorine & Ph including necessary chemicals of 200 ml Each complete all as specified and directed. 223 S&F in replacement & jointing in position of unserviceable UPVC pipe confoRMing, to IS: 4985:2000 and suitable for the respective working pressures with all fittings and accessories e.g coupling, tees, bends, reducers, screwed adapters, flanged tails pieces etc. jointing as per manufacturers insturctions , including excavation, earth work (45cm width and 30 cm depth) in any type of soil / rock complete all as directed . (a)UPVC pipe 90 mm OD-6 Kg/cm² 224 All as per item No 223 here in before but UPVC pipe 75 mm OD-6 Kg/cm² 225 All as per item No 223 here in before butUPVC pipe 63 mm OD-6 Kg/cm² 226 All as per item No 223 here in before but UPVC pipe 50 mm OD-6 Kg/cm² 227 Supply & fixing in replacement of unserviceable Sprinkler gear driven 1 pop upSprinkler with heavy duty plastic rubber cover with triple nozzle configuration-ensure even distribution of water.2NI adjustable or continuous rotation -provide a full range of adjustment from 40 to 360 degree vandal resistant clutch with auto reset . It has tranjectory angle of 26 degree and part circle adjustment from 40 degree -345 degree.It is capable of delivering 19.3 LPM-110.5 LPM with dia of coverage from 12.5-2.5m at 2.0-4 bar. 228 S&F in replacement of unserviceable 1 Swing Joint. 229 S&F in replacement of unserviceable Metallic services saddle 3/4 230 S&F in replacement of unserviceable Valves box 12 Rectangular Valve box with cover.The valve boxes shall be high strength , high density polyethelene constructed material.It should be UV stablizer with anti oxidants, resistant to moisture. 231 Supply and fixing in replacement of complete inner filter assembly suitable for 57 m3/hr flow rate, working pressure 2.5 Kg/Sqcm and filtering velocity 50m3/hr/m2 of the 1200mm dia pressure filterincluding opening the pressure filter 1200mm dia Make-Pentair installed at swimming pool equipment room completeand testing for leakage for proper functioningcomplete all as directed 232 Opening the pressure filter 1200mm dia Make-Pentair installed at swimming pool equipment room removing the old filter media, removing all the scaling deposited on the surface area of filter assembly by using wire brush and cleaning the filter with HCL, refilling new filter media of various silica grade as required at site, re-assembling the filter assembly and testing for leakage for proper functioning and testing complete all as directed 233 Taking up cast iron water mains of 250mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge 234 All as per item No 233 here-in-before but 200mm bore 235 All as per item No 233 here-in-before but 150 mm bore 236 All as per item no 233 here in before but 100mm dia bore 237 All as per item no 233 here in before but 80mm dia bore 238 Supply and laying of DI pipes of grade K-9 with spigot and socketted ends centrifugally cast in any length sizeof 250mm dia bore complete laid in trenches all as specified and as directed by Engineer-in-charge 239 All as per item no 238 as above but DI Pipeof 200mm dia bore 240 All as per item no 238 as above but DI Pipeof 150mm dia bore 241 All as per item no 238 as above but DI Pipeof 100mm dia bore 242 All as per item no 238 as above but DI Pipeof 80mm dia bore 243 Cutting to DI pipes of 250mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge. 244 All as per item no 243 as above but DI Pipe of size 200mm dia bore 245 All as per item no 243 as above but DI Pipe of size upto 150mm dia bore 246 Supply and fixingand testing of DI fittings for spigot and socket pipes such as bends (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, Y junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering suitable for pipes upto 250 mm bore complete all as specified and as directed by engr in charge. NOTE : Excavation earth work in any type of soil/Rockand jointing of pipes shall be measured and paid seperately. 247 Supply and fixing250mm dia tyton rubber gasket ,packing and rings complete all as specified and directed 248 Supply and fixing200mm dia tyton rubber gasket ,packing and rings complete all as specified and directed 249 Supply and fixing150mm dia tyton rubber gasket ,packing and rings complete all as specified and directed 250 Supply and fixing100mm dia tyton rubber gasket ,packing and rings complete all as specified and directed 251 Supply and fixing80mm dia tyton rubber gasket ,packing and rings complete all as specified and directed 252 Supplying, laying, jointing, welding & testing MS Pipe of size 100mm dia bore (Heavy duty classC),as per IS 3589 (1981) thickness 5.4 mm suitable for welded joints and flanged joints as per site requirement including painting with two coats of anti corrosive paint ,laid in trenches/bore or laying on floors for connections to centrifugal pump sets for suction/delivery and to connected outgoing water main pipe line complete including welding works and taking down old unserviceable MS pipe complete all as specified and directed. 253 All as per above item No 252.00 here-in-before but 150mm dia 254 Supply and fixingand testing ofMS Pipe bend of size 150mm dia bore (Heavy duty classC),as per IS 3589 (1981) thickness 5.4 mm complete all as specified and as directed by engr in charge. 255 All as per above item No 254.00 here-in-before but 100mm bore 256 All as per above item No 254.00 here-in-before but 80mm bore 257 Supply and fixingand testing ofMS Pipe Tee of size 150mm dia bore (Heavy duty classC),as per IS 3589 (1981) thickness 5.4 mm complete all as specified and as directed by engr in charge.
