Tender For Repair Of Various Types Of Steel Furniture And Its Painting For Src Prc And Various Units At Ge Ramgarh Cantt; 1 Almirah large 1/2Hx1/2ShWith one side mirror (Drg No:1033) :-M & L for replacement of legs of Almirah Steel Large ½H x ½ Sh with one side mirror, with new one made out of 1mm thick MS sheet shape and size as per drawing , shape & size as shown in drawing or complete all as directed by Engineer in charge. 2 M & L for replacement of 3 way locking device of Almirah Steel Large ½H x ½ Sh with one side mirror, with new one made out of 10mm dia steel round rod and 3mm thick MS plate holding cover and washer, shape & size as shown in drawing or complete all as directed by Engineer in charge. 3 M & L for replacement of Shelf of Almirah Steel Large ½H x ½ Sh with one side mirror, with new one made out of 1mm thick MS sheet and providing 04 Nos. of cleat for fixing to almirah shape and size as per drawing , shape & size as shown in drawing or complete all as directed by Engineer in charge. 4 M & L for replacement of Door/ shutterof Almirah Steel Large ½H x ½ Sh with one side mirror, with new one made out of 1mm thick MS sheet and providing 75mm butt hinges for fixing door to almirah shape and size as per drawingshape & size as shown in drawing or complete all as directed by Engineer in charge. 5 M & L for replacement of 50mm brass lock of Almirah Steel Large ½H x ½ Sh with one side mirror,with new onewith double keys, shape & size as shown in drawing or complete all as directed by Engineer in charge. Make: LINK / Godrej / Harrison. 6 M & L for replacement of 125mm chromium plated steel handle of Almirah Steel Large ½H x ½ Sh with one side mirror, with new one shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. 7 M & L for replacement of 5mm thick looking mirror of approved Make of Almirah Steel Large ½H x ½ Sh with one side mirror, with new one shall be provided, shape & size as shown in drawing or complete all as directed by Engineer in charge. 8 M & L for replacement of old broken/damaged socket of Almirah Steel Large ½H x ½ Sh with one side mirror with new Socket (02 Nos per Almirah), shall be provided and fixed as shown in drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 9 M & L for replacement of old broken/damaged existing hanging rod/pipe of Almirah Steel Large ½H x ½ Sh with one side mirror with new one 19mm dia stainless steel hanging pipe, shape & size as shown in drawing or complete all as directed by Engineer in charge. 10 M & L for taking out existing dislocated 3 way locking device of Almirah Steel Large ½H x ½ Sh with one side mirror and making its shape and size as per drawing and refixing the same in position including welding and providing locking device cover,fixing arrangements etc., shape & size as shown in drawing or complete all as directed by Engineer in charge. 11 M & L fortaking out existing dislocated door/ shutter of Almirah steel large ½H x ½ Sh with one side mirror, and making its shape and size as per drawing and refixing the same in position including welding and providing 75 mm butt hinges (03 Nos) as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 12 M & L for taking out existing dislocated shelf of Almirah steel large ½H x ½ Sh with one side mirror and refixing the same in position in including providing cleats etc., shape & size as shown in drawing or complete all as directed by Engineer in charge. 13 M&L for taking outof existing leg from Almirah steel large ½H x ½ Sh with one side mirror,made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, shape & size as shown in drawing or complete all as directed by Engineer in charge. 14 Almirah large SteelWith shelf (Drg No:1031/167(M) :-M & L for replacement of legs of Almirah Steel Large with shelf with new one made out of 1mm thick MS sheet shape and size as per drawingshape & size as shown in drawing or complete all as directed by Engineer in charge. 15 M & L for replacement of 3 way locking device system of Almirah Steel Large with shelf with new one made out of 10mm dia steel round rod and 3mm thick MS plate holding cover and washer shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 16 M & L for replacement of shelf of Almirah Steel Large with shelf with new one made out of 1mm thick MSsheet and providing 04 Nos of cleats for fixing to almirah shape and size as per Drawing shape & size as shown in drawing or complete all as directed by Engineer in charge. 17 M & L for replacement of Door/Shutter of Almirah Large Steel with shelf with new one shall be made out of 1mm thick MS sheet and providing 75 mm butt hinges for fixing door to almirah shape and size as per drawingshape & size as shown in drawing or complete all as directed by Engineer in charge. 18 M & L for replacement of 50mm brass lock of Almirah Large Steel with shelf ,with new onewith double keys,shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. Make:LINK / Godrej / Harrison. 19 M & L for replacement of 125mm chromium plated steel handle of Almirah large steel with shelf with new one shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. 20 M & L for taking out existing dislocated 3 way locking device of Almirah large steel with shelf and making its shape and size as per drawing and refixing the same in position including welding and providing locking device cover,fixing arrangements etc., shape & size as shown in drawing or complete all as directed by Engineer in charge. 21 M & L fortaking out existing dislocated door/ shutter of Almirah Large Steel with shelfand making its shape and size as per drawing and refixing the same in positing including welding and providing 75 mm butt hinges (03 Nos) as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 22 M & L for taking out existing dislocated shelf of Almirah Large Steel with shelfand refixing the same in position in including providing cleats etc., shape & size as shown in drawing or complete all as directed by Engineer in charge. 23 M&L for taking outof existing leg from Almirah Large Steel with shelf ,made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, shape & size as shown in drawing or complete all as directed by Engineer in charge. 24 Almirah Steel Medium 1/2 Hx 1/2 Sh (FD-1034) :-M & L for replacement of legs of Almirah steel med 1/2 H x 1/2 Sh with new one shall be made out of 1mm thick MS sheet shape and size as per drawing , shape & size as shown in drawing or complete all as directed by Engineer in charge. 25 M & L for replacement of 03 way locking device system of Almirah steel med 1/2 H x 1/2 Sh with new one made out of 10mm diameter steel round rod and 3mm thick MS plate holding cover and washer shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 26 M & L for replacement of Shelf of Almirah steel med 1/2 H x 1/2 Sh with new one made out of 1mm thick MS sheet and providing 4 nos of cleats for fixing to almirah shape and size as per existing drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 27 M & L for replacement of Door shutter of Almirah steel med 1/2 H x 1/2 Sh with new one made out of 1mm thick MS sheet and providing 75mm butt hinges (03 Nos.) for fixing door to almirah shape and size as per existing drawing,shape & size as shown in drawing or complete all as directed by Engineer in charge. 28 M & L for replacement of 50mm brass lock of Almirah steel med 1/2 H x 1/2 Sh ,with new onewith double keys, shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. Make: LINK / Godrej / Harrison. 29 M & L for replacement of 125mm chromium plated steel handle of Almirah steel med 1/2 H x 1/2 Sh with new one shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. 30 M & L for replacement of 5mm looking mirror of approved make of Almirah steel med 1/2 H x 1/2 Sh with new one shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. 31 M & L for taking out existing dislocated 3 way locking device ofAlmirah steel med 1/2 H x 1/2 Sh and making its shape and size as per drawing and refixing the same in position including welding and providing locking device cover,fixing arrangements etc., shape & size as shown in drawing or complete all as directed by Engineer in charge. 32 M & L for taking out existing dislocated shelf of Almirah steel med 1/2 H x 1/2 Sh and refixing the same in position in including providing cleats etc. shape & size as shown in drawing or complete all as directed by Engineer in charge. 33 M & L fortaking out existing dislocated door/ shutter of Almirah steel med 1/2 H x 1/2 Sh and making its shape and size as per drawing and refixing the same in positing including welding and providing 75 mm butt hinges (03 Nos) as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 34 M&L for taking outof existing leg from Almirah steel med 1/2 H x 1/2 Sh,made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, shape & size as shown in drawing or complete all as directed by Engineer in charge. 35 M & L for replacement of old broken/damaged socket of Almirah steel med 1/2 H x 1/2 Sh with new Socket (02 Nos per Almirah), shall be provided and fixed as shown in drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 36 M & L for replacement of old broken/damaged existing hanging rod/pipe of Almirah steel med 1/2 H x 1/2 Sh with new one 19mm dia stainless steel hanging pipe, shape & size as shown in drawing or complete all as directed by Engineer in charge. 37 Almirah Medium Steel with shelf (FD-1032) :- M & L for replacement of legs of Almirah Med Steel with shelf with new one shall be made out of 1mm thick MS sheet shape and size as per drawingshape & size as shown in drawing or complete all as directed by Engineer in charge. 38 M & L for replacement of 3 way locking device of Almirah Med Steel with shelf with new one shall be made out of 10mm diameter steel round rod and 3 mm thick MS plate holding cover and washer shape and size,shape & size as shown in drawing or complete all as directed by Engineer in charge. 39 M & L for replacement of Shelf of Almirah Med Steel with shelf with new one shall be made out of 1mm thick MS sheet and providing 4 Nos of cleats for fixing to almirah shapes and size as per drawing,shape & size as shown in drawing or complete all as directed by Engineer in charge. 40 M & L for replacement of Door/ shutter of Almirah Med Steel with shelf with new one shall be made out of 1mm thick MS sheet and providing 75 mm butt hinges (03 Nos.) for fixing door to almirah shape and size as per drawing,shape & size as shown in drawing or complete all as directed by Engineer in charge. 41 M & L for replacement of 50mm brass lock ofAlmirah Med Steel with shelf ,with new onewith double keys,shall be provided and fixed,shape & size as shown in drawing or complete all as directed by Engineer in charge. Make: LINK / Godrej / Harrison. 42 M & L for replacement of 125mm chromium plated steel handle of Almirah Med Steel with shelf, with new one, shall be provided and fixed,shape & size as shown in drawing or complete all as directed by Engineer in charge. 43 M & L for taking out existing dislocated 3 way locking device ofAlmirah Med Steel with shelf and making its shape and size as per drawing and refixing the same in position including welding and providing locking device cover,fixing arrangements etc., shape & size as shown in drawing or complete all as directed by Engineer in charge. 44 M & L fortaking out existing dislocated door/ shutter of Almirah Med Steel with shelf, and making its shape and size as per drawing and refixing the same in positing including welding and providing 75 mm butt hinges (03 Nos) as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 45 M & L for taking out existing dislocated shelf of Almirah Med Steel with shelf and refixing the same in position in including providing cleats etc., shape & size as shown in drawing or complete all as directed by Engineer in charge. 46 M&L for taking outof existing leg from Almirah Med Steel with shelf ,made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, shape & size as shown in drawing or complete all as directed by Engineer in charge. 47 Chair Tubular steel with/withoutout Arms (FD-75(M) :- M & L for replacement of unserviceable wooden seat of Chair tubular steel with/without arms, with new one duly caned with approved quality cane and exposed wooded portion to be painted with two coat of synthetic enamel paint, fixed in frame of chair tubular steel with/without arms with screws, shape & size as shown in drawing or complete all as directed by Engineer in charge. 48 M & L for replacement of unserviceable wooden back of Chair tubular steel with/without arms, with new one duly caned with approved quality cane and exposed wooded portion to be painted with two coat of synthetic enamel paint, fixed in frame of chair tubular steel with/without arms with screws, shape & size as shown in drawing or complete all as directed by Engineer in charge. 49 M & L for replacement ofexisting/broken stiffener of Chair tubular steel with/without arms, with new one 490mm long (02 Nos) and (04 Nos. cleat size 50mm long made out of MS flat iron 20x3mm welded under the seat frame and back frame respectively, shape & size as shown in drawing or complete all as directed by Engineer in charge. 50 M & L for replacement of Hard rubber shoes of Chair tubular steel with/without arms of any type to set of 4 Nos in one chair, shape & size as shown in drawing or complete all as directed by Engineer in charge. 51 M & L for replacement of unserviceable wooden handles of Chair tubular steel with arms, with new one made out of well seasoned first class teak wood of chair tubular steel with arm to set of 02 Nos in one chair, shape & size as shown in drawing or complete all as directed by Engineer in charge. 52 Chair CBA Special (FD-120R) :- M & L for replacement of existing broken/damaged leg of Chair CBA special of size 1.6mm thick 10mm square tube, 440 mm long,with new one as per drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 53 M & L for replacement of existing broken/damaged seat of Chair CBA special duly caned with approved quality cane and exposed wooded portion, fixed in frame of chair CBA special with screws, shape & size as shown in drawing or complete all as directed by Engineer in charge. 54 M & L for replacement of unserviceable wooden back of Chair CBA special duly caned with approved quality cane and exposed wooded portion, fixed in frame of chair CBA special with screws, shape & size as shown in drawing or complete all as directed by Engineer in charge. 55 M & L for replacement of existing broken/damaged hand rest and including fixing arrangemant to the frame of Chair CBA special with new 12 mm thick well seasoned first class teak wood plank hand rest, shape & size as shown in drawing or complete all as directed by Engineer in charge. 56 M & L for replacement of existing broken/damaged flat iron of Chair CBA special with new flat iron of 25x3 mm, 225 mm long (02 nos.) and detatched frame made to shape by welding , complete all as directed by Engineer in charge. 57 M & L for replacement of square hard rubber shoe of Chair CBA special of any type to set to 04 Noes in one chair, complete all as directed by Engineer in charge. 58 CHAIR EASY STEEL WITH CUSHION (FD-121M) :- M & L replacement of unserviceable Seat of Chair Easy steel with cushion with new one made out of 12 mm BWR plywood commercial face, foam cushion and rexene shape & size as shown in drawing or complete all as directed by Engineer in charge. 59 M & L replacement of unserviceable Back of Chair Easy steel with cushion with new one made out of 12 mm BWR plywood commercial face, foam cushion and rexene shape & size as shown in drawing or complete all as directed by Engineer in charge. 60 M & L for replacement ofexisting/broken MS cleat of Chair Easy Steel with cushion with new one (08 Nos). cleat size 50mm long made out of MS flat iron 20x3mm welded under the seat frame and back frame respectivelyshape & size as shown in drawing or complete all as directed by Engineer in charge. 61 M & L replacement of wooden handle made out of well seasoned first class teak wood of Chair Easy steel with cushion to set of 02 Nos in one chair, shape & size as shown in drawing or complete all as directed by Engineer in charge. 62 M & L replacement of square hard rubber shoe of Chair Easy steel with cushion to set of 04 Nos in one chair, shape & size as shown in drawing or complete all as directed by Engineer in charge. 63 FORM WITHOUT BACK (FD-77M) :- M & L for replacement of existing unserviceable/damaged SEAT of Form without back with new well seasoned first class teak wood duly apply with two coat of French Polish, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 64 M & L for replacement of existing unserviceable/damaged STIFFENERof Form without back with new one made out of 25mm MS tube 1.6 mm thick, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 65 M & L for replacement of existing broken/damaged LEGSof Form without back with new one made out 1.6mm thick, 25mm Square tube, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 66 DESK STEEL (FD-107) :- M & L for replacement of existing unserviceable/damaged TOP of DESK STEEL with new one made out of 18mm thick prelaminated particle board exterior grade of size 530x1220x18 mm thick, shape & size as shown in drawing or complete all as directed by Engineer in charge. 67 M & L for replacement of existing unserviceable BOTTOM of DESK STEEL with new one made out of 18mm thick prelaminated particle board exterior grade of size 530x1220x18 mm thick, shape & size as shown in drawing or complete all as directed by Engineer in charge. 68 M & L for replacement of existing unserviceable BOTH SIDE of DESK STEEL with new one made out of 18mm thick prelaminated particle board exterior grade of size 530x200x18 mm thick, shape & size as shown in drawing or complete all as directed by Engineer in charge. 69 M & L for replacement of existing unserviceable BACK of DESK STEEL with new one made out of 6mm thick commercial plywood teak veneer face one side and commercial on the other side of size 530x1220x6 mm thick, shape & size as shown in drawing or complete all as directed by Engineer in charge. 70 M & L for replacement of existing broken/damaged legs of DESK STEEL made out of 1.6mm thick 25 mm dia MS conduit pipe, 640mm long shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 71 M & L for replacement of existing unserviceable STIFFENER of DESK STEEL made out from 25 mm dia MS conduit pipe, 1.6mm thick 480mm long shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 72 M & L for replacement of existing unserviceable Long rail of DESK STEEL made out from 25 mm dia MS conduit pipe, 1.6mm thick 1220mm long shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 73 M & L replacement of round hard rubber shoe 25 mm dia of DESK STEEL of any type to set of 04 Nos, shape & size as shown in drawing or complete all as directed by Engineer in charge. 74 Stool revolving adjustable steel 3 height with padded (FD-354) :-M & L for replacement of existing unserviceable Seat foam and rexene from Stool Revolving adjustable Steel 3 height with padded, with new 50mm thick foam 28 density with superior quality of rexene and seat made out of new ply 12mm BWR plywood commercial face, shape & size as shown in drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 75 M & L for replacement of round 20mm hard rubber shoe Stool revolving adjustable steel 3 height with padded of any type to set of 04 Nos. in one Desk steel ,shape & size as shown in drawing or complete all as directed by Engineer in charge. 76 TABLE DINING ORS (FD-165M) :- M & L for replacement of existing unserviceable LONG STIFFENER of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 77 M & L for replacement of existing unserviceable SHORT STIFFENER of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 78 M & L forreplacement of existing broken/damaged LEGS of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 79 M & L forreplacement of existing broken/damaged SHORT RAILS of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, 515 mm long, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 80 M & Lfor replacement of existing broken/damaged LONG RAILS of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, 1550 mm long, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 81 M & Lfor replacement of existing unserviceable TOPof TABLE DINING ORS with new one made out of 18mm thick pre-laminated particle board exterior grade with desired finished in one side and balancing white and including providing 04mm teak wood beading all around table top, shape & size as shown in drawing or complete all as directed by Engineer in charge. 82 M & L for replacement of square hard rubber shoe of TABLE DINING ORS of any type to set to 04 Nos in one Table, shape & size as shown in drawing or complete all as directed by Engineer in charge. 83 TEAPOY VERANDAH (FD-255) :- M & Lfor replacement of existing unserviceable LEGS of TEAPOY VERANDAH with new one made out of 1.6mm thick, 20mm dia MS conduit pipe made to shape U of 964 mm shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 84 M & Lfor replacement of existing broken/damagedTOP LONG RAIL of TEAPOY VERANDAH with new one top rail medium of size 350x25x4 mm thick Flat iron welded to top conduit pipe frame, shape & size as shown in drawing or complete all as directed by Engineer in charge. 85 M & L forreplacement of existing broken/damagedTOP SHORT RAIL of TEAPOY VERANDAH with new one top rail medium of size 200x25x4 mm thick Flat iron welded to top conduit pipe frame, shape & size as shown in drawing or complete all as directed by Engineer in charge. 86 M & Lfor replacement of existing unserviceableTOPof TEAPOY VERANDAH with new one made out of 18mm thick prelaminated particle board exterior grade with desired finished in one side and balancing white and including providing 04 mm thick teak wood beading all round table top, shape & size as shown in drawing or complete all as directed by Engineer in charge. 87 M & L for replacement of round 20mm hard rubber shoe of TEAPOY VERANDAH, of any type to set of 04 No in one Teapoy Verandah,shape & size as shown in drawing or complete all as directed by Engineer in charge. 88 TABLE OFFICE CLERK STEEL (FD-1004) :-M & L for replacement of existing broken/damaged leg of Table office clerk steel, with new one made out from 1.6mm thick, 25mm square tube 760 mm long, shape & size as shown in drawing or complete all as directed by Engineer in charge. 89 M & Lfor replacement of existing broken/damaged LONG RAILS ofTable office clerk steel with new one made out of 25 mm Square tube 1.6 mm thick,shape & size as shown in drawing or complete all as directed by Engineer in charge. 90 M & L forreplacement of existing broken/damaged SHORT RAILS ofTable office clerk steel with new one made out of 25 mm Square tube 1.6 mm thick,shape & size as shown in drawing or complete all as directed by Engineer in charge. 91 M & L for replacement of 50mm brass lock of Table office clerk steel,with new one with double keys, shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. Make: LINK / Godrej / Harrison. 92 M & L for replacement of old existing/damaged drawer of Table office clerk steel with new drawer made out from 1mm thick MS plain sheet to required shape and size as per drawing ,shape & size as shown in drawing or complete all as directed by Engineer in charge. 93 M & L for replacement of old existing/damaged LONG STIFFENER of Table office clerk steel with new one made out of 25 mm Square tube 1.6 mm thick, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 94 M & L for replacement of old existing/damaged SHORT STIFFENER of Table office clerk steel with new one made out of 25 mm Square tube 1.6 mm thick, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 95 M & L for replacement of existing/damaged TOP of Table Office clerk steel with new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, shape & size as shown in drawing or complete all as directed by Engineer in charge. 96 M & L for supply and fixing of PVC handle of Drawer of Table Office Clerk Steel shape and Size as per Drawing,shape & size as shown in drawing or complete all as directed by Engineer in charge. 97 M & L for takingout of existing drawer of table office clk steel and refixing the same in position after repair and denting making shape and size as per drawing and repering the same in position including fixing arregment andshape & size as shown in drawing or complete all as directed by Engineer in charge. 98 M & L for replacement of square hard rubber shoe of Table Office Clerk Steel of any type to set of 4 nos, shape & size as shown in drawing or complete all as directed by Engineer in charge. 99 TABLE OFFICE OFFICERS STEEL (FD-1003) :- M & L for replacement of existing broken/damaged leg of Table office officer steel made out from 1.6mm thick, 25mm square tube 760 mm long, shape & size as shown in drawing or complete all as directed by Engineer in charge. 100 M & Lfor replacement of existing broken/damaged LONG RAILS ofTable office officer steel with new one made out of 25 mm Square tube 1.6 mm thick,shape & size as shown in drawing or complete all as directed by Engineer in charge. 101 M & L forreplacement of existing broken/damaged SHORT RAILS of Table office officer steel with new one made out of 25 mm Square tube 1.6 mm thick,shape & size as shown in drawing or complete all as directed by Engineer in charge. 102 M & L for replacement of 50mm brass lock ofTable office officer steel, with new onewith double keys, shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. Make: LINK / Godrej / Harrison. 103 M & L for replacement of old existing/damaged LONG STIFFENER ofTable office officer steel with new one made out of 25 mm Square tube 1.6 mm thick, shape & size as shown in drawing or complete all as directed by Engineer in charge. 104 M & L for replacement of old existing/damaged SHORT STIFFENER ofTable office officer steel with new one made out of 25 mm Square tube 1.6 mm thick, shape & size as shown in drawing or complete all as directed by Engineer in charge. 105 M & L for replacement of old existing/damaged drawer of Table office officer steel with new drawer made out from 1mm thick MS plain sheet to required shape and size ,shape & size as shown in drawing or complete all as directed by Engineer in charge. 106 M & L for takingout of existing drawer of Table office officer steel, and refixing the same in position after repair and denting making shape and size as per drawing and repering the same in position including fixing arregment andshape & size as shown in drawing or complete all as directed by Engineer in charge. 107 M & L for supply and fixing of PVC handle of Drawer ofTable office officer steel, shape and Size as per Drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 108 M & L for replacement of existing/damaged TOP of Table Office officer steel with new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, shape & size as shown in drawing or complete all as directed by Engineer in charge. 109 M & L for replacement of square hard rubber shoe of Table Office officer Steel of any type to set of 4 nos, in one table, shape & size as shown in drawing or complete all as directed by Engineer in charge. 110 TABLE 3x2 STEEL WITH/WITHOUT DRAWER (FD-1007/1008)M & L for replacement of existing broken/damaged leg of Table 3X2 steel with/without drawer, with new one made out from 1.6mm thick, 25mm square tube 760 mm long, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 111 M & L for replacement of existing broken/damaged long rail of Table 3X2 steel with/without drawer, with new one made out from 1.6mm thick, 25mm square tube 800 mm long, shape & size as shown in drawing or complete all as directed by Engineer in charge. 112 M & L for replacement of existing broken/damaged SHORT RAIL of Table 3X2 steel with/without drawer, with new one made out from 1.6mm thick, 25mm square tube 500 mm long, shape & size as shown in drawing or complete all as directed by Engineer in charge. 113 M & L for replacement of existing long stiffener of Table 3X2 steel with/without drawer, with new one made out from 1.6mm thick, 25mm square tube, shape & size as shown in drawing or complete all as directed by Engineer in charge. 114 M & L for replacement of existing short stiffener of Table 3X2 steel with/without drawer, with new one made out from 1.6mm thick, 25mm square tube, shape & size as shown in drawing or complete all as directed by Engineer in charge. 115 M & L for replacement of 50mm brass lock ofTable 3X2 steel with drawer , with new onewith double keys, shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. Make: LINK / Godrej / Harrison. 116 M & L for replacement of drawer of Table 3X2 steel with drawer, with new one made out of 1mm thick PBI sheet, shape & size as shown in drawing or complete all as directed by Engineer in charge. 117 M & L for supply and fixing of PVC handle of Drawer ofTable 3X2 steel with drawer Steel, shape & size as shown in drawing or complete all as directed by Engineer in charge. 118 M & L for takingout of existing drawer of Table 3X2 steel with drawer, and refixing the same in position after repair and denting making shape and size as per drawing and repering the same in position including fixing arregment andshape & size as shown in drawing or complete all as directed by Engineer in charge. 119 M & L for replacement of existing/damaged TOP of Table 3X2 steel with/without drawerwith new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, shape & size as shown in drawing or complete all as directed by Engineer in charge. 120 M & L for replacement of square hard rubber shoe of Table 3X2 steel with/without drawer of any type of set of 4 nos, shape & size as shown in drawing or complete all as directed by Engineer in charge. 121 TABLE 3x3 STEEL(FD-1009) :- M & L for replacement of existing broken/damaged Top rail ofTable 3X3 steel, with new one made out from 1.6mm thick, 25mm square tube , shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 122 M & L for replacement of existing broken/damaged legs of Table 3X3 steel, with new one made out of 25m square MS tube 1.6mm thick, 760mm long, shape and size as per existing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 123 M & L for replacement of existing/damaged TOP of Table 3X3 steelwith new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, shape & size as shown in drawing or complete all as directed by Engineer in charge. 124 M & L for replacement of square hard rubber shoe of Table 3X3 of any type to set of 4 Nos.in one table shape & size as shown in drawing or complete all as directed by Engineer in charge. 125 Locker 04 Unit Steel ( FD-127 (M) ) :- M&L for taking outof existing leg from Locker 04 Unit Steel made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding and shape & size as shown in drawing or complete all as directed by Engineer in charge. 126 M&L for replacement ofLeg of Locker 04 Unit Steel with new one made out of 1mm thick MS sheet shape and size all as shown on drg & as specified includingspot welding as required duly painted with two coats of synthetic white enamel paint over a coat of red oxide primer. shape & size as shown in drawing or complete all as directed by Engineer in charge. 127 M & L for replacement of Door / shutterofLocker 04 Unit Steel , with new one made out of 1mm thick MS sheet and providing 02 Nos. 75mm butt hinges for fixing door to locker shape and size as per drawing duly painted with two coats of synthetic white enamel paint, over a coat of red oxide primer, shape & size as shown in drawing or complete all as directed by Engineer in charge. 128 M & L fortaking out existing dislocated door/ shutter ofLocker 04 Unit Steel and making its shape and size as per drawing by repair and replacement of unserviceable parts,denting and refixing in position including fixing arrangements,welding etc.and providing 75 mm butt hinges (03 Nos) as per existing,complete all as directed byEngineer in charge. 129 M&L for replacement of old broken/damaged butt hinges 75mm of Locker 04 Unit Steel with new one of 75mm butt hinges (02 nos) each door/shutter including fixing arrangement and spot welding, shape & size as shown in drawing or complete all as directed by Engineer in charge. 130 M & L for replacement of old broken/damaged existing D shape handle of Locker 04 Unit Steel with new 100mm D shape stainless steel handle shall be provided and fixed as shown in drawing, shape & size as shown in drawing or complete all as directed by Engineer in charge. 131 M & L for replacement of 50mm brass lock ofLocker 04 Unit Steel , with new onewith double keys, shall be provided and fixed, shape & size as shown in drawing or complete all as directed by Engineer in charge. Make: LINK / Godrej / Harrison. 132 M & L for Removing of existing shelf from Locker 04 Unit Steel made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, shape & size as shown in drawing or complete all as directed by Engineer in charge. 133 M & L for replacement of Shelf of Locker 04 Unit Steel , with new one made out of 1mm thick MS sheet and providing 04 Nos. of cleat for fixing to Locker 04 Unit Steel shape and size as per drawing duly painted with two coats of synthetic white enamel paint, over a coat of red oxide primer, shape & size as shown in drawing or complete all as directed by Engineer in charge. 134 M & L for replacement of old painted steel surface of Locker 04 Unit Steel ( FD-127 (M) , filling, depressed, portion by oil putty, sanding with emery paper/cloth to have smooth surface and applying two coats of synthetic white enamel paintover a coat of red oxide (wherever necessary) to all exposed surface (internally & externally) by spray machine, shape & size as shown in drawing or complete all as directed by Engineer in charge. 135 Book Case Steel (FD-1038) M & L for replacement of legs of Book Case Steel, with new one made out of 1.00 mm thick mild steel sheet shape and size as per shown on drawing complete all as directedbyEngineer in charge 136 M & L for replacement of shutter frame of Book Case Steel, with new one made out of 1.00 mm thick mild steel sheet shape and size as per shown on drawing complete all as directedbyEngineer in charge 137 M & L for replacement of lock of shutter of Book Case Steel, with new one brass lock shape and size as per shown on drawing complete all as directedbyEngineer in charge 138 M & L for replacement of Shelf of Book Case Steel ,with new one made out of 1.00 mm thick mild steel sheet and providing 04 Nos. of cleats for fixing of shelf to book case steel, shape and size as per drawing , complete all as directedby Engineer in charge. 139 M & L for replacement of 3mm thick pane glass of approved make of Book Case Steel, with new oneprovideandfixedshape & size as shown on drawing, complete all as directed byEngineer in charge. 140 M & L for replacement of top / bottom of Book Case Steel, with new one made out of 1.00 mm thick mild steel sheet shape and size as per shown on drawing complete all as directedbyEngineer in charge 141 M & L for taking out existing dislocated leg of Book case steel and after repair making its shape and size as per drawing and refixing in the same position including welding, shape and size as per shown on drawing complete all as directedbyEngineer in charge 142 M & L for taking out existing dislocated frame shutter of Book case steel and after repair making its shape and size as per drawing and refixing in the same position including welding, shape and size as per shown on drawing complete all as directedbyEngineer in charge 143 M & L for taking out existing dislocated Shelf of Book case steel and after repair making its shape and size as per drawing and refixing in the same position including welding, shape and size as per shown on drawing complete all as directedbyEngineer in charge 144 Side Rac with 3/4 space steelM & L for replacement of legs of Side Rac with 3/4 space steel, with new one made out of 40mmx40mmx3mm thick MS angle iron 810mm long shape and size as per shown on drawing complete all as directedbyEngineer in charge 145 M & L for replacement of Shelf of Side Rac with 3/4 space steel ,with new one made out of 1.00 mm thick mild steel sheet, shape and size as per drawing , complete all as directedby Engineer in charge. 146 M & L for replacement of partition of Side Rac with 3/4 space steel ,with new one made out of 1.00 mm thick mild steel sheet, shape and size as per drawing , complete all as directedby Engineer in charge. 147 M & L for replacement of back covering of compartments of Side Rac with 3/4 space steel ,with new one made out of 1.00 mm thick mild steel sheet, shape and size as per drawing , complete all as directedby Engineer in charge. 148 Rack Steel Adj 6 tierM & L for replacement of legs of Rack Steel Adj 6 tier, with new one made out of 40mmx40mmx4mm thick MS angle iron 1905mm long shape and size as per shown on drawing complete all as directedbyEngineer in charge 149 M & L for replacement of Shelf of Rack Steel Adj 6 tier ,with new one made out of 1.00 mm thick mild steel sheet, shape and size as per drawing , complete all as directedby Engineer in charge. 150 Removing of broken/damaged plastic cane from Chair verandah (Drg No FD-359/256), welded joints, painting frame with two coat synthetic white enamel paint & recanning the chair NE MAT pattern with new white plastic cane 0.50 mm thick & 04 mm wide best quality & joints/knots of cane strif shall be under the seat frame/back frame, shape & size as shown in drawing or complete all as directed by Engineer in charge. 151 M & L for replacement of PVC hard rubber shoes fixed at bottom four Nos. shoes of each leg of Chair verandah (Drg No FD-259) , shape & size as shown in drawing or complete all as directed by Engineer in charge. 152 M & L for replacement of old painted steel surface of ALMIRAH STEEL LARGE 1/2Hx1/2Sh w/one side mirror (FD-1033), filling, depressed, portion by oil putty, sanding with emery paper/cloth to have smooth surface and applying two coats of synthetic enamel paint Olive Green over a coat of red oxide (wherever necessary) to all exposed surface (internally & externally) by spray machine, shape & size as shown in drawing or complete all as directed by Engineer in charge. 153 All as per item No. 152 here-in-before but for Almirah large steel w/sh (FD-1031/167(M) 154 All as per item No. 152 here-in-before but for Almirah steel medium 1/2Hx1/2Sh(FD-1034) 155 All as per item No. 152 here-in-before but for Almirah Med steel w/sh (FD-1032) 156 All as per item No. 152 here-in-before but for Chair Tubular steel with/without arms (FD-75(M)) 157 All as per item No. 152 here-in-before but for Chair CBA special (FD-120(R)) 158 All as per item No. 152 here-in-before but for Chair easy steel with cushion (FD-21(M)). 159 All as per item No. 152 here-in-before but for FORM without back (FD-78(M)). 160 All as per item No. 152 here-in-before but for DESK STEEL (FD-107)). 161 All as per item No. 152 here-in-before but for STOOL REVOLVING ADJUSTABLE STEEL 3 Height with padded. (FD-354)). 162 All as per item No. 152 here-in-before but for TABLE DINING ORS . (FD-165(M)). 163 All as per item No. 152 here-in-before but for TEAPOY VERANDAH . (FD-255(M)). 164 All as per item No. 152 here-in-before but for TABLE OFFICE CLERK STEEL . (FD-1004). 165 All as per item No. 152 here-in-before but for TABLE OFFICE OFFICERS STEEL . (FD-1003). 166 All as per item No. 152 here-in-before but for TABLE 3X2 STEEL WITH DRAWER . (FD-1006). 167 All as per item No. 152 here-in-before but for TABLE 3X2 STEEL WITHOUT DRAWER . (FD-1007). 168 All as per item No. 152 here-in-before but for TABLE 3X3 STEEL. (FD-1009). 169 All as per item No. 152 here-in-before but for Book Case Steel. (FD-1028). 170 All as per item No. 152 here-in-before but for Rack steel Adj 6 tier . (FD-1038). 171 All as per item No. 152 here-in-before but for SIDE RACK 03/04 SPACES STEEL. (FD-1023).
