Tender For Special Repair To Seepage/ Leakage At Toilets And Sm-290 Block At Ganesh Enclave Under Ge (Mcte) Mhow; 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles. 2 M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 3 M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. 4 M&L for Virified Ceramic tiles light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 5 All as per Srl Item No.04 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. 6 Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. 7 M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 8 Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge complete all as specified and directed. 9 M&L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed. (a)Demolition of old sunken surfaces complete and cleaniong of all loose particles and apply cement slurry @3.00 kg/ sqm on old surfaces by brushing. (b)Provide PCC 1: 1.5:3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound as approved, finish the surface even & smooth without using extra cement. (c)Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (d)Applying surfaces of bituminous primer (conforming to IS-3384-1965) @0.40 Kg/ Sqm complete. On complete sunken surfaces of floor & wall and provide necessary connections to soil/ waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (e)After laying of all sewage/ plumbing pipes with fixtures in position, apply two coats of polymeric based chemical as per manufactures instructions over bottom and sudes of sunken portion upto 600 mm height. (f)APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with plyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. (g)Fill the sunken floor with PCC 1:5:10 type E-2 using brick aggregate. (h)Fixing of 50mm dia CPVC pipe projecting 450mm clear of face outer wall shall be provided to drain out seepage water if any. (j)Testing of sunken as per specification mentioned in SSR Part-I/ P.S. 10 M&L for 50mm thick PCC type B-2, 1:2:4 (using 40mm graded aggregrate) as in floor finishing and making cement concrete surface even and smooth without using extra cement complete all as specified and directed. 11 Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. 12 M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 finished even and smooth without using extra cement including mixing with water proofing compound complete all as specified and directed. 13 M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. 14 M&L for preparation of new plaster surfaces of ceiling and applying two coat of distember oil emulsion complete all as specified and directed. 15 M&L for complete removal of existing treament and preparation of surfaces and applying two coat Acryic emulsion with roller over applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed. (Note:- Contractor shall furnished gurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machin (Mechanical means) 16 S & F in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed. 17 S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed complete all as specified and directed. 18 S&F in repairs vitreous china, white, wash hand basin, flat back size 550 x 400mm including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed. 19 S&F in repair 600 x 450mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. 20 S&F in repair chromium plated brass wall mixer fancy type overhead shower complete with wall flange (without hand &over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. 21 S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. 22 S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. 23 S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. 24 S&F in repair 110mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified and directed. 25 S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. 26 S&F Grating 100mm dia of CP with or without hole complete all as specified and directed. 27 S&F in repair 15mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. 28 S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. 29 S&F in repair 15mm dia brass chromium plated pillar tap, fancy type with or without lettered Hot or Cold, with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed. 30 S&F in repairs of CP waste coupling of any size and dia for stainless steel sink with drain board or without drain board complete all as specified and directed. 31 S&F in repair CP toilet paper holder fixed with screws complete all as specified and as directed. 32 M&L for in repair 12mm thick plywood, commercial quality, BWR grade, type BB, 5 ply, fixed with screws to timber frame work complete all as specified and directed. 33 S&F, in repair mild steel helical door spring 300mm long stove enamelled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. 34 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. 35 Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specified and directed. 36 Supply and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. 37 Supply and laying of CPVC brass elbow 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed. 38 Supply and laying of CPVC brass Tee 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed. 39 Supply and laying of CPVC brass Male brass Adeptor (MTA/ MBTA) 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed. 40 S & F in repair 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. 41 S & F in repair 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. 42 S & F in repair 110mm bore PVC (SWR) bend any radius complete all as specified and directed. 43 S & F in repair 110mm bore PVC (SWR) bend with acess door complete all as specified and directed. 44 S & F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. 45 S & F in repair 75mm bore PVC (SWR) bend any radius complete all as specified and directed. 46 S & F in repair 75mm bore PVC (SWR) bend with acess door complete all as specified and directed. 47 S & F in repair 75mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. 48 S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. 49 S & F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. 50 S & F in reparis 32mm Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets etc complete all as specified and directed by Engr-in-Charge. 51 S & F in repairs 32/40mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc complete all as specified and directed by Engr-in-Charge. 52 S & F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality complete all as specified and directed by Engr-in-Charge. 53 Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premisescomplete all as specified and directed. 54 S&F Solid PVC door frame of size 50mm 47mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing. 55 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed. 56 S & F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) including taking down of old ones complete all as specified and directed. 57 S&F in Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 58 S&F 150mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. 59 S&F 125mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. 60 S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 61 S&F 120mm size, butt hinges, heady weight, cold rolled mild steel complete all as specified and directed. 62 S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. 63 M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 64 Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified and directed by the Engineer in Charge. 65 M&L Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 using flyash bricks, complete all as specified and directed.
