Annual Operation, Maintenance And Providing Civil And Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Cws Jayant For 02 Years, Jayant-Madhya Pradesh

TDR : 51896356

Tender Notice
BOQ

Expired

Jayant , Madhya Pradesh

Tender Brief : Annual Operation, Maintenance And Providing Civil And Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Cws Jayant For 02 Years

Document Fees
Refer document

EMD
₹ 1058500.0 /-

Tender Value
₹ 8.46 Crore /-

Submission Date
05-11-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Part A - Civil Works
2	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kinds of soil
4	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand(zone-III) : 6 graded stone aggregate 20 mm nominal size).
5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size)
6	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar 1:4 (1 cement : 4 fine sand).
7	12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
8	Neat cement punning
9	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
10	Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size).
11	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.Cold twisted bars
12	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
13	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqmArea of slab over 0.50 sqm.
14	Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
15	Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kinds of soil.
16	CARRIAGE OF MATERIALS Carriage of material by Mechanical Transport including loading, unloading and stackingLime, moorum, building rubbish Lead - 3 Km
17	French spirit polishing :Two or more coats on new works including a coat of wood filler.
18	Providing and fixing 100 mm sand cast Iron grating for gully trap.
19	Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :100 mm dia pipe
20	Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm
21	Providing and fixing Stainless Steel A Isis 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x460 mm bowl depth 200 mm.
22	Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450 mm.
23	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
24	Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
25	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :Black solid plastic seat with lid
26	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
27	Providing and fixing soil, waste and vent pipes :100 mm dia.Sand cast iron S&S pipe as per IS: 1729.
28	Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :For 100 mm dia pipe
29	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diaSand cast iron S&S as per IS - 1729
30	Providing and fixing plain bend of required degree.100 mm diaSand cast iron S&S as per IS - 1729
31	Providing and fixing heel rest sanitary bend100 mm diaSand cast iron S&S as per IS - 1729
32	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100 mmSand cast iron S&S as per IS - 1729
33	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand Cast Iron S&S as per IS: 1729
34	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter
35	Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
36	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
37	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.110 mm diameter
38	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Single tee without door110x110x110 mm
39	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend
40	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.Shoe (Plain)110 mm Shoe
41	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm
42	Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm
43	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm
44	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150x10 mm
45	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm
46	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm
47	Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :150 mm
48	Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm
49	Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :75x47x1.70 mm
50	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complet 250x16 mm
51	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm
52	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm
53	Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm
54	Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100 mm
55	Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete.Twin rubber stopper
56	Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws
57	Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :20 mm dia (heavy type)
58	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm.
59	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
60	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.
61	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws:30 mm thick shutters.with ISI marked M.S. pressed butt hinges bright finished of required size - Kiln seasoned and chemically treated hollock wood.
62	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm.
63	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Kiln seasoned and chemically treated hollock wood.35 mm thick shutters
64	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Kiln seasoned and chemically treated hollock wood.
65	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked
66	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces.
67	Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).18 mm thick
68	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood
69	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood.
70	Supplying and fixing new wooden fillets wherever necessary:Hollock wood fillets.
71	Renewal of old putty of glass panes (length) .
72	Lettering with black Japan paint of approved brand and manufacture
73	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
74	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..In cement mortar
75	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below
76	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below
77	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
78	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
79	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
80	Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
81	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.
82	Providing and fixing to existing door frames.30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge.
83	Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).
84	Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).
85	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
86	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
87	Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
88	Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
89	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
90	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete.
91	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.
92	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore15mm nominal bore
93	Brick Work with non modular fly as(FLAG) confirming to ISI 12894 of class designated 7.5 average compressive strength etc. complete in all respect in foundation and plinth in cement mortar 1:6(1cement:6coarse sand)
94	Brick Work with non modular fly as(FLAG) confirming to ISI 12894 of class designated 7.5 average compressive strength etc. complete in all respect insuperstructure above plinth level upto floor V level in cement mortar 1:6 (1cement:6coarse sand )
95	Half Brick Work with non modular FLAG) bricks confirming to ISI 12894 of class designated 7.5 average compressive strength etc. complete in all respect infoundation and plinthIn cement mortar 1:4 (1cement:4coarse sand )
96	Half brick Work with non modular fly FLAG brick confirming to ISI 12894 of class designated 7.5 average compressive strength etc. complete in all respect insuperstructure above plinth level upto floor V level in cement mortar 1:4 (1cement:4coarse sand )
97	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
98	Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers
99	6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
100	Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster
101	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
102	Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
103	Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
104	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
105	Providing and fixing aluminum U beading of required size to Pre-laminated/ flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge.
106	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
107	Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x100x100 mm : and sand cast iron S&S as per IS - 1729
108	Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : 100 mm : Sand cast iron S&S as per IS - 1729
109	Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
110	Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
111	Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
112	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
113	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes\
114	Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable materialBeyond 30 cm girth upto and including 60 cm girth
115	Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
116	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend
117	Providing and fixing hand shower of jaguar make or equivilent.
118	Providing and fixing hung wash basin with fixing accessories set size 560x470x195 mm of jaguar make or equivilent.
119	Providing and fixing angular stop cock with wall flangeof jaguar make or equivilent.
120	Providing and fixing two way bib cock with wall flangeof jaguar make or equivilent.
121	Providing and fixing soap dispensor with glass bottleof jaguar make or equivilent.
122	Welding by gas or electric plant including transportation of plant at site etc. complete.
123	Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry but excluding the cost of nosing of steps etc complete. 25 mm thick with 12.5 mm nominal size stone aggregate
124	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
125	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat.
126	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats.
127	Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm.
128	Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete.The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick
129	Facility Manager (Highly skilled) (One no. per day)
130	Assistant Facility Manager (Avg skilled + Highly skilled) (2 nos. per day)
131	Petty carpentary repair works such as repairing of cupboard, nails screw fixing hinges tightening of doors and windows shutter etc. as & when required as per instruction of EIC.
132	Labour rate for small petty water supply repair work such as fixing of washer in bib cock, stop cpck, adjusting of foot valves of cistern, fixing of water supply fitting such asGI nipple, socket, tee, plug, union, elbow etc. as and when required as per instruction of EIC.
133	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
134	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
135	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-incharge. With stainless steel cover plate minimum 1.25 mm thickness
136	Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such asfootpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.(Item No. 16.89)
137	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
138	Part B - Water Supply Works
139	Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :
140	200 mm dia pipe
141	Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
142	100 mm dia Class I
143	150 mm dia Class I
144	200 mm dia Class I
145	Repairing of sluice valve including replacement of all required material such as MS spindle with chuck-nut, rubber insertion/packing nut-bolts after dismantling the valve and re-fitting the same in position as per instruction of EIC
146	(a) 50 mm dia
147	(b) 80 mm dia
148	(c) 200 mm dia
149	Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) :
150	Up to 300 mm dia
151	Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :
152	20 mm nominal bore
153	25 mm nominal bore
154	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting \"and making good the walls etc.
155	15 mm dia nominal bore
156	20 mm dia nominal bore
157	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
158	20 mm dia nominal bore
159	25 mm dia nominal bore
160	40 mm dia nominal bore
161	50 mm dia nominal bore
162	80 mm dia nominal bore
163	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
164	20 mm nominal bore
165	25 mm nominal bore
166	40 mm nominal bore
167	50 mm nominal bore
168	Supplying pig lead at site of work.
169	Day to day water supply & maintenance of CWS & RRS colony area including operation of pumps in three shifts, periodical maintenance of pumps like greasing and checking of nuts & bolts, coupling, alignment etc complete and valve operation, keeping watch of water supply pipeline to make leak-proof of the same. Material required like gasket, packing and required T&P will be arranged by the contractor as per instruction of EIC
170	Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :
171	200 mm diameter pipe
172	Providing and fixing brass stop cock of approved quality :
173	15 mm nominal bore
174	20 mm nominal bore
175	Providing and fixing brass bib cock of approved quality :
176	15 mm nominal bore
177	Providing and fixing uplasticised PVC connection pipe with brass unions :
178	30 cm length : 15 mm nominal bore
179	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
180	15 mm nominal bore
181	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
182	15 mm nominal bore
183	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
184	15mm nominal bore
185	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe
186	32 mm dia
187	40 mm dia
188	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work):
189	15 mm nominal bore
190	20 mm nominal bore
191	25 mm nominal bore
192	40 mm nominal bore
193	50 mm nominal bore
194	80 mm nominal bore
195	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular Tank
196	Providing and fixing PTMT bib cock of approved quality and colour.
197	15mm nominal bore, 86 mm long, weighing not less than 88 gms
198	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
199	25 to 40 mm nominal bore
200	50 to 80 mm nominal bore
201	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
202	10 litre capacity - White
203	Providing and fixing bolts including nuts and washers complete.
204	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work25 mm nominal outer dia. Pipes.
205	20 mm nominal outer dia Pipes
206	40 mm nominal outer dia Pipes
207	50 mm nominal outer dia Pipes
208	Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
209	100 mm diameter
210	Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
211	15 mm nominal bore, 105 mm long, weighing not less than 138 gms
212	Providing and fixing PTMT pillar cock of approved quality and colour .
213	15 mm nominal bore, 107 mm long foam flow, weighing not less than 110 gms
214	Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
215	Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
216	Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
217	Providing and fixing PTMT, push cock of approved quality and colour.
218	15 mm nominal bore, 98 mm long, weighing not less than 75 gms
219	Fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
220	15 mm
221	20 mm
222	25 mm
223	40 mm
224	50 mm
225	80 mm
226	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
227	15 mm to 40 mm nominal bore
228	Above 40 mm nominal bore
229	Supply of bib cock washer
230	Supplying of GI Socket
231	15 mm dia
232	20 mm dia
233	25 mm dia
234	Supplyingof GI elbow
235	15 mm dia
236	20 mm dia
237	25 mm dia
238	Supplyingof GI Nipple
239	15 mm dia
240	20 mm dia
241	25 mm dia
242	Supplyingof GI Tee
243	15 mm dia
244	20 mm dia
245	25 mm dia
246	Supplyingof GI Plug
247	15 mm dia
248	20 mm dia
249	25 mm dia
250	40 mm dia
251	Supply of PVC WATER tank cover
252	Cleaning of roof top water tank including draining out water, cleaning, disinfecting the tank by bleaching powder etc and washing the tank with fresh water, writing of cleaning date with paint on the outer face of the tank all complete with tools,tackles and consumables as per instruction of EIC.
253	Lowering and lifting of Indian mark - II hand pump as per instruction of EIC
254	Providing and fixing plunger of Indian mark II lower and upper side complete set for one hand pump etc. all complete as per instruction of EIC
255	Providing and fixing chain for hand pump etc. all complete as per instruction of the EIC
256	Providing and fixing centre pin for Indian make hand pumps
257	Providing and fixing washer for Indian make hand pumps
258	Providing and fixing GI pipes of 32 mm dia with Indian make hand pumps etc. all complete as per instruction of the EIC 32 mm dia Class B
259	Proviidng and fixing GI socket long type thread for using lowering . 32 mm dia GI Pipe with pump 32 mm dia
260	Providing and fixing new cylinder of Indian Mark II hand pump
261	Providing and fixing big rod for hand pump
262	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
263	20 mm nominal outer dia. Pipes.
264	15 mm nominal outer dia .Pipes.
265	40 mm nominal outer dia .Pipes.
266	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore
267	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
268	Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore, Horizontal
269	Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms
270	Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long, weighing not less than 88 gms
271	Supply ofCistern fittings
272	Float valve
273	Handle and lever
274	Syphon
275	C.I.. Brackets for wash basin of sink
276	PTMT pillar cock
277	8 mm dia CP brass /ss jet with flexible tube 3 mtrlong with sstriangular plate for European type WC
278	White plastic seat (solid)withlid CP brass high and rubber
279	(a)CP brass waste
280	(1)40 mm
281	(2)32 mm
282	Cleaning of overhead tank including scraping of stains and muck from wall and floor and removal of muck from tank, disinfecting the tank by lime/bleaching powder etc and washing the tank with fresh water, writing the cleaning date with paint on the outer surface of column near ground all complete with tools, tackles and consumables as per instruction of EIC.
283	Cleaning of ground water reservoir including scrapping of strains and muck from wall floor and removal of muck from reservior , disinfecting the tank by lime/bleaching powder etc. and washing the tank with fresh water,writing the cleaning date with paint on the outer surface of tank all complete with tools , tackles and consumables as per instruction of EIC.
284	Providing liquid chlorine solution , Sodium Hypochlorite(5% Concentration) based formulated conforming to IS-11673:1993 Grade-1 and10500-1991 for treatment of potable water
285	Part C - Upkeeping Work
286	Cleaning of toilet (Floor area upto 10 Sqm) including cleaning of dado, skirting, WC pan (Indian type/western type), wash basin, urinals, glass shelves, mirror and other fittings, if any for D type or equivalent Qtrs. including any other wash basin outside the toilet by hand dusting and cleaning with soap solution acids, deodorants, phenyl etc.to make the toilet clean & hygienic all complete with tools, tackles & consumables as per instruction of EIC.
287	Cleaning of toilet (Floor area upto 8 Sqm) including cleaning of dado, skirting, WC pan (Indian type/western type), wash basin, urinals, glass shelves, mirror and other fittings, if any for \"C\" type or equivalent Qtrs. including any other wash basin outside the toilet by hand dusting and cleaning with soap solution acids, deodorants, phenyl etc.to make the toilet clean & hygienic all complete with tools, tackles & consumables as per instruction of EIC.
288	Cleaning of toilet including WC pan, wash basin, other fittings, if any for \"B\" & lower type Quarter by hand dusting and cleaningwith soap solution acids & phenyl etc.to make the toilet clean & hygienic all complete with tools, tackles as per instruction of EIC.
289	Cleaning of toilet with attached with hostel room, office chambers etc including cleaning of floors, skirting and dado, WC pan (Indian/European type ) wash basin, shelves, mirror and other fittings ,if any, by hand dusting and cleaning with soap solution acids, deodorants , phenyl etc to make the toilet clean andhygienic and providing naphthalene balls in urinals complete with all tools,tackles and consumable as per instruction of EIC (For community and service buildings)
290	Cleaning mopping and washing of floor of public buildings and other places neatly with detergent/ bleaching powder etc. all completes with tools tackles and consumable to make the floor clean and hygienic as per instruction of EIC.
291	Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place(in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC
292	Upto 300 mm wide
293	Above 300 mm up to 600 mm
294	Above 600 mm
295	Cleaning of all types of roof including removal of dry leaves, weedings and cleaning drain holes, brooming etc. all complete with tools & tackles and stacking the garbage at specified place as per instruction of EIC.
296	Cleaning of door shutter, window shutters including chowkhats, window grills, glass panes, cobwebs etc. of service/community buildings with necessary detergents, chemical etc. complete asper instruction of EIC.
297	Collection of garbage from door to door and disposal of the same through closed Door to door collection vehicle enabled with GPS system for tracking to the specified place within lead of 1KM and time duration of 4 hours per day(8 AM to 12 Noon)including sweeping of stair case(for 1st and 2nd floor qtrs) with all tools and tackles as per instruction of EIC.
298	Ground floor
299	First Floor
300	Brooming & cleaning of all roads in colony and within the premises of service building and other places as required with all tools & tackles and stacking the garbage at specified place as per instruction of EIC.
301	Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime bleaching power etc. and refilling the pit with earth all complete with tools, tackles and consumables as per instruction of EIC
302	Big animal (Cow,Buffalo,OX and the like)
303	Small animal (Dog,Cat,fox,pig,birds and the like)
304	Dismantling C.I. pipes including excavation and refillingtrenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50metre lead as per direction of Engineer-in-charge:
305	Up to 150 mm diameter
306	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
307	100 mm dia
308	Sand cast iron S&S as per IS - 1729
309	Providing and fixing plain bend of required degree.
310	100 mm dia
311	Sand cast iron S&S as per IS : 3989
312	Providing and laying non-pressure NP2 class (light duty)R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
313	250 mm dia. R.C.C. pipe
314	300 mm dia. R.C.C. pipe
315	Cleaning of inspection chamber of all size and disposal of sludge etc at specified place outside the colony with all leads including removal and replacing ofdamaged top cover andchamber if any as per instructions of EIC.
316	Cleaning of choked sewer line & sludge line of all diameter including removal of earth , opening of joints cleaning of pipeline , making joint leak proof etc. all complete including disposal of sludge materials outside the colony with all leads as specified place with tools & tackles as per instructions of EIC.
317	Cleaning of sludge line and traps (kitchen & toilets) of all diameter at different floors including opening of joints, cleaning of pipe line and again jointing & flushing with fresh water all complete with tools and tackles as per instructions of EIC
318	Part D - Horticulture Work
319	Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
320	Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
321	Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) : 2.4.1 Screened through sieve of I.S. designation 20 mm
322	Rough dressing the trenched ground including breaking clods.
323	Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
324	grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and earth shall be paid for separately). In rows 5 cm apart in both directions
325	Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm
326	Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.)Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height.
327	Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste out side of the peripheri of colony, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.)
328	Prestigious works / H.M. house & officers entitled to free accommodation.(as per yard stick 1Mali =1.00Acre)
329	Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
330	Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required (Materials shall be provided by the department) as per direction of officer in charge
331	Maintenance of potted plant Earthen pot in displayed at ground floor only in bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials shall be provided by the department) as per direction of officer in charge
332	Providing and wartering of plants through water tanker of Horticulture features i.e. tree, shrubs, hedge/edge, ground cover etc. at the site of work. Water tanker having 5000 lit. capacity with one labour for watering i/c cost of water, filling of tanker, wartering at site with all leads and lifts as per direction of officer-in-charge.
333	Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)
334	Trees Plant
335	Shrubs Plant
336	Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge.
337	Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
338	Providing and displaying of Croton Baby Golden Punctatumaureum plant, having ht. 23 cm to 30 cm, well developed with fresh and healthy foliage in 15 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge.
339	Providing and Displaying plants Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
340	Providing and Displaying plants Dahlia single in different colour with fresh & healthy foliage well developed with 6 to 8 half blooming buds in20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
341	Providing and Displaying plants Gerbera Hybrid, well developed, with fresh and healthy foliage, fully blooms in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
342	Providing and Displaying plants Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen plant 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
343	Providing and Displaying plantsMarigold(Tagetes) inca hybrid different colourhaving 30 cm and above ht., with 6 to 8 flowers in bloom & blooming condition, well developed pot should be fully covered with fresh and healthy, foliage and flowers in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
344	Providing and Displaying plants Pansy hybrid sakata in different colour with fresh & healthy foliage well developed in 15 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
345	Providing and Displaying plants Salvia dwarf variety with fresh & healthy foliage well developed multi branching in blooming stage in 15 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
346	Providing and Displaying plants Verbena in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage inbloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
347	Providing and Displaying plants Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.
348	Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
349	Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
350	Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having100 Nos plants as per direction of the officer-in-charge.
351	Aster dwarf
352	Calendula double
353	Carnation hybrid
354	Dahlia double
355	Gazania hybrid
356	Marigold inca hybrid
357	Pansy Hybrid
358	Petunia hybrid
359	Salvia Hybrid different colour
360	Verbena hybrid
361	Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having100 Nos plants as per direction of the officer-in-charge.
362	Balsam seedling
363	Celosia argentea & Celosia cristata Hybrid
364	Cosmos hybrid
365	Gaillardia Double
366	Kochia
367	Portulaca hybrid
368	Sunflower Dwarf
369	Vinca Hybrid
370	Zinnia hybrid
371	Supply of insecticides/ Fungicides, pesticides and fertilizers from authorised dealers at site as per instruction of EIC
372	DAP
373	Bone meal
374	Urea
375	Rose mixture
376	Neem cake
377	Sarso khali
378	Super phasphate
379	NPK
380	Folidal
381	Melatian
382	Roger30%
383	Monocrotophas
384	Man co Jeb
385	Indocell
386	Supply and stacking of Phyllanthus emblica (Amla) plant of height 150 to 165 cm. in Big HDPE Bag as per direction of the officer-in-charge.
387	Supply and stacking of Eugenia jambolana (Jamun) plant of height 150 to 165 cm. in big poly bags of size 25cm as per direction of the officer-in-charge.
388	Supply and stacking of Mangifera indica (Mango-grafted ) plant of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-incharge.
389	Painting of flower pots as per instruction of EIC
390	Earthen pots of size 12\" Wall masta/Terracota
391	Cement concrete pots of size 15\" with synthetic enamel paint
392	Providing Plant Chrysenthamum (Guldowdi) single variety in different colour well developed having 45 to 60 cm ht., minimum 100 and above half bloom flowers open well stacked with bamboo stick having three layer tiding by thread fresh and healthy foliage in 25 cm Earthen Pot
393	Providing and Displaying plants Petunia hybrid in different colour with fresh & healthy foliage well developed in 15 cm Earthen Pot/Plastic Potas per direction of the officer-in-charge.
394	Providing round the clock security guard without gun for watch &ward of Government premises and its all belongings by deploying neatly dressed security guards in 8 hour\"s shift including necessary T&P like torch, lathi and uniform etc.complete,as per directions of Engineer-in-charge.(One job means 8 hour\"s duty). In case of any theft, dounle of stolen amount will be recovered.
395	Part E - Pest Control
396	Anti adult measures:-General disinfection/pest control with new generation odourless, colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mosquitos, house flies, etc. using Residual spray of Deltamethrin 2.5% SC Flow (K-othrine or approved equivalent) insecticides should be sprayed uniformly over the surfaces of walls, ceilings, etc.Frequency- Once in 3 months
397	Anti adult measures:-General disinfection/pest control with new generation odourless, colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mosquitos, house flies, etc. using Residual spray of Cyfluthrin 5% EW (Solfac EW 050 or approved equivalent) insecticides should be sprayed uniformly over the surfaces of walls, ceilings, etc.Frequency- Once in 3 months
398	Thermal fogging Using insecticide deltamethrin 1.25% ULV(King fog or approved equivalent) mixed with diesel in the ratio of 1:199, for outdoor operation of colony etc.Frequency - Monthly
399	Anti Larvae Measures: -Treatment by using Diflubenzuron 25% WP(Bi - Larv or approved equivalent ) solution to be spread as per instruction of EICFrequency - Weekly
400	Part F -Electrical portion
401	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC cassing capping, with piano type switch, phenolic laminated sheet, suitable size wooden board and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Group A)
402	Wiring for submain wiring alongwith earth wire with the 2 x 2.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC cassing capping along with 1no 2.5 sq.mm PRLS PVC insulated copper conductor single core cable(ISI Marked) for loop earthing as required.
403	Wiring for submain wiring alongwith earth wire with the 2 x 6 Sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC cassing capping along with 1no 6 sq.mm PRLS PVC insulated copper conductor single core cable(ISI Marked) for loop earthing as required.
404	Supplying and Fixing of 5 pin 6/16 A switch & socket(combined) , 5 in 1 with box with with 2 fixing Holes including connection etc.
405	Supplying and fixing 5/6 amps piano type switch on the existing switch box/ cover including connections etc. as required
406	Supplying and fixing 5/6 amps 5 pin flush type socket outlet on the existing switch box/ cover including connections etc. as required
407	Supplying and fixing Electronic Mini Fan Regulator Rotary Step typeon the existing switch board including connectionsetc. as required.
408	Supplying and fixing PVC batten/ angle holder including connections etc. as required.
409	Providing and fixing 32 amp capacity DP disconnector fuse switch unit (Main Switch) inside the existing panel board with ISI marked porcelene fuses including drilling holes in cubicle panel, making connections, etc. as required.
410	Providing and fixing 100 amp capacity TP&N disconnector fuse switch unit(Main Switch) inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
411	Supplying and fixing DP sheet steel enclosure on concelled/ recess along with 63 Amps 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
412	Supplying and fixing 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of SPN poles with MCB DB complete with connections, testing and commissioning etc. as required. Single Pole.
413	Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the DP sheet steel MCB DB complete with connections, testing and commissioning etc. as required. 63 Amp.
414	Fixing of electrical consumable items in residential quarters ( MQ type, B type, C&D type, GM bungalow , officers club , guest house , workers club , Hospitals , telephone exchange, DAV school and others service building under CWS Jayant township) by engaging 10 man power consisting of 05 nos. skilled includind 02 Electrician as well as overhead licence holder for Genral and II nd Shift ( Electrician) 05 nos. un skilled ( Helper) per day for 730 days to attend the daily complaints of above mentioned locations. Required size Ladder, 4 Leg Ladder with plateform, drill manhine, LT Megger and otherTools and Tackle will be arrange by Contractor
415	Supply ofwooden board with sun mica top size 8”X10”X2” / 10”X12”X2”
416	Supply ofwooden board with sun mica top size 6”X8”X2”.
417	Supply ofwooden board with sun mica top size 7”X4”X2”.
418	Supply ofwooden board with sun mica top size 4”X4”X2”.
419	Supply of sun mica sheettop of size8”X10” / 10”X12”
420	Supply of sun mica sheettop of size6”X8” / 7”X9”
421	Supply of sun mica sheettop of size7”X4” / 8”X5”
422	Supply of sun mica sheettop of size4”X4” / 5”X5”
423	Repairing/Rewinding of Ceiling/Exhaust Fans
424	Dismantling, rewinding and refitting of AC Ceiling Fan with super copper enameled wire of suitable gauge (As per existing gauge) of different size and make after cleaning of damaged/ burnt windings including replacement of bearing, capacitor, greasing, checking etc. in all respect complete (Including transportation of ceiling fan)
425	Supply and fixing of clamp with rubber bush, required size nut-bolt, lock pin etc complete of different size suitable to existing/rewinded ceiling fans of different size and make
426	Dismantling, rewinding and refitting AC Exhaust Fan with super copper enameled wire of suitable gauge (As per existing gauge) including replacement of bearing and capacitor if required.(Including transportation of exhaust fan)
427	Providing of capacitor 2.5 mfd. 240 Volt
428	Supplying and fixing of reputed make SKF, FAG, NBC only sealed ball bearing suitable to existing/rewinded ceiling fans of different size as below.
429	Sealed both side ball bearing No. 6201 Z
430	Sealed both side ball bearing No. 6202 Z
431	Sealed both side ball bearing No. 6203 Z
432	Sealed both side ball bearing No. 6204 Z
433	Providing of 2 core 1.5 Sq.mm copper wire for connection of various fans and etc (1100V FRLS PVC round sheathed flexible copper conductor
434	Providing, installation and testing of slim, compact, auminum die cast edge panel. recess mounted round / square fixture with opal diffuser and separate electronic driver. 18 Watt LED6500 K
435	Providing, installation and testing of ultra slim, recess mountedwith high brightness suitable for ceiling compact, auminum die cast edge LED 2*2 panel. Recess mounted squarefixture with opel diffuser and separate electronic driver.40 Watt LED6500 K
436	Total impact of GST for the purpose of CTC

Also Visit

Tenders

Madhya Pradesh Tenders

Services Tenders

Hospitality Related Services Tenders

Facility Management Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Annual Operation, Maintenance And Providing Civil And Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Cws Jayant For 02 Years, Jayant-Madhya Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Annual Operation, Maintenance And Providing Civil And Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Cws Jayant For 02 Years, Jayant-Madhya Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us