Tender For Repair Of Skating Ground At N-3, Aurangabad-Maharashtra

Tender For Repair Of Skating Ground At N-3- 1 Dismantaling brick masonary in lime or cement mortar and stacking the matrial as directedwith all lead lifts etc.BDW 8 46.08 as directed by Engineer in charge (SSR No 46.08) 2 Excavation foundation earth , soils of all types and gravel and soft murum including removing the excavated materialup to a distance of 50mtrs .and lifts beyond the buildimg area stacking and spreading directed normal dewatering preparing the bed for foundation and excluding backfilling, ramming watering (including shoring and structing )etc.complete (lift 0 to 1.5 m) by Manual means BDA 1 21.02BD -a 1 page no.259 (SSR No.: 21.02) 3 Providing soling using 80 mm size trap metal in 15 cm. layerincluding filling voids with Crushed sand/grit, ramming,watering etc.complete.BDA 21.40 As directed byEngineer in charge (SSR No.21.4) 4 Providing and laying casting in situ /redy mix cement concret in M-10oftrap /Granite /Qurtzite Gniess /metal forFoundition and bedding including Balling outWater from work laying pumpng compacting roughningthem if spacial finish is to be Proivieded finshing if requiar and curing complete with fullyAutomatic .micri processr based PLC With SCADA reversable drum type mixer/concret batch mix plant (pan mixer) etc.complete. with natural VSI quality artificail sand BD E 1 24.01 Bd E 1 Page No.287(SSR :24.01) 5 Providing second class burnt brick masonry with convetional /I.S.ype beicks cement marter 1:6 in funditions and plinth of inner wlls /in plinthof extrenal walls including bailing out water manually stricking joints on expose feces racking out joints on exposeed feces and wateringcomplete. BDF27.01 4126.116 ( SSRNo.27.01) 6 Providing and layingcastingin situ /read mixcement codcretem-15 of trap/ granit /quartzite/ gneiss metal for coping to plinth or paraped ,moulded or chemfered as per drawing or as directed including steel plywood/steelform work compacting roughening them if spacial finish is to be proviede finishing unven and hony combed urface and curing stc.complete.the cement mortor 1:3 cement palster conciderd for rendering unven and hony combedsurface only newly laid concrete shall be covered by gunny bag plastic ,tarpulin etc.(wooden centering will not be allaowed )BDE 3.24.16 Bd E 3/Page No.288/I.S.456 (2000)SSR No.24.16) 7 Providing sendfaced palster extranally in cement mortar using kharsalia /kasaba or similar type of sand in all positionincluding base coat of 15 mm thick in cement mortar 1:4using waater proofingcompound at 1 kg per cement bagcuring he same of the base than 2 days and keeping the suraface of the base coat rough to receive the sand face tretment 6 to 8 mm thik in cement mortar 1:4 finishing the suraface by tacking out grains and curing for fourteen days scaffolding etc.complate Bd L 332.11BD L 3 Page No.369 (SSR No.32.11) 8 Providing uncourse rubble masonary of trap /granit/quartzite/ gneiss stone in cementmartor 1:6 in foundition and plainth of inner walls /in plainth of extranal walls including bailing out water manually stricking joints on unexpose faces and watering completeAs director by Engineer incharge SSR No. 28.01 9 Providing flush grooved pointingwith cement morter 1:3 for stone Mosonary work insludingscaffolding and curing etc.complete. NO. Bd . Lpage NO.15 A.Page .NO. 32.17 Page No.372 (SSR No.32.17) 10 Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. BDW 49.3800000000002 As directed by Engineer in chareg (SSR No.46.38) 11 Providing cement based water proofing treatment te terraces (Indian water proofing or alike) with brick bats laid in required slope to crain the water for any span after cleaning the base surface. Applying a coat of cement slurry admised with compound and laying the brick bats on bottom eparoved water proofing layer In C M.1:5 admixed with approved water prooting compound filling up to half depth of brick sats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water pracing compound and finally top finishing with average 20 mm, thick layers of same mortar added with jute fiber at 1 kg per bag including Anishing the surface simacth with coment slurry admired with approved water compound. Marking finished surface with false proofing squares of 300mm x 300 mm. making the Junctions at the parapet rounded and tapered fop for required height, with orig mould at the junction of plaster and parapet and curing and covering 10 Guarantee against yeers leakproofness on Court fee stamp paper of Rs. 500/-nduding ponding test etc. complete. BD3 31.04- As directed by Engineer in charge. (SSR No.: 31.04) 12 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 imm thick on batt faces or as directed, all necessary beads, mouldings and rapping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated trendies on troth sides, and finishing with French Polish etc complete. BDT-12 39.08 BD-T-11 and 12 Page No. 482-83 (SSR No.: 39.08) 13 Provveding and applying two coats of synthetic enamel paint of approved colour to new /ald structural steel work and wood work in buildings, including scaffolding if necessary, crasiing and preparing the surface (excluding anmar coat) etc complete, BDO 4A 35.05-ad.0.4 Page No. 405 (SSR No.: 35.06) 14 Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 0 35.14 As directed by Engineer-in-charge (SSR No. 35.14) 15 Providing and applying plastic emulsion paint of approved quality, colour and shatte to surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete BDP 6A 36.13 Bd. P.6 Page No. 414 and Pre-approval of Superintending Engineer (SSR No.: 36.13) 16 Providing and fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 6.33 Kg/meter with necessary fittings.and remaking good the demolished portion and primer of anti carrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe sine if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BDV 5.41.14 - Bd.V.S Page No. 551 (SSR No.: 41.14) 17 Add for royalty charges sto co (SSR No.:)Add for royalty charges sic co

INR 600 /-

INR 17.04 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB