Supplying, Fitting And Fixing 8Mm Thick Waterproof Laminated Wooden Flooring Work Conforming To En13329:2006 With Plank Size Not Less Than 1200 Mm X 190 Mm (With Unilin/Tongue-Groove Locking Arrangement) Having 0.2Mm Thick Top Abrasive Layer Over A Decora, khanabal-Jammu And Kashmir

Tender For Upgradation Of Basic Infrastructure Requirements Of (R&B) Mechanical Division South Kashmir. [Renovation & Repair] Advertised Cost=?01.47 Lacs ( Inclusive Of All Applicable Taxes With 18% Gst) Supplying, fitting and fixing 8mm thick Waterproof Laminated wooden Flooring Work conforming to EN13329:2006 with plank Size not less than 1200 mm X 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF)having density > 850 kg/m3 substrate core over a resin saturated backing layer and installing through unilin or tongue-groove system (having locking strength not less than 1000 kg/m)over a 5 mm thick underlayer polyurethane foam on polythene sheet 250 microns, over a smooth, flat, hard subfloor free from moisture (<8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer T profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting End edge, T- moulding, Reducer) shall have to be added separately, wherever required. 2 Supplying, fitting and fixing of Belgium matting (Nylon/Rubber) with thickness not less than 8mm . 3 Supplying, fitting and fixing of Door Mats 3x2 ft Nylon/Rubber with thickness not less than 10mm 4 S/F/F of 5 layer PVC tank of capacity 500 ltr with necessary MS Stand at desired height and plumbing job requiring pipe dia 25mm and 50mm or whatever is required on the site. 5 25 mm PPR Pipe along with Gate valves and accessories. 6 S/F/F of SS Cabinet sink of size not less than 18 inch mounted on an MS stand at Desired Height with the necessary fittings of Waste water line and Tap fitted to the 500 ltr installed tank or whatever required on the site. 7 P/F/F of the MS Inverter Rack/ Cabinet suitable to hold Inverter and at least four batteries duly primer coated and epoxy coated. 8 P/F/F of MS table (Counter type) with SS Top for Gas stove of size 4 x2 ft size with Desired height. 9 S/I/T/C of drinking water purifier with 25 ltr storageType of water purification technology - RO+UV Input power voltage range - 160 - 230 V AC, 1 PH, 50 Hz.Design value of input water TDS to the system - 2000 mg/Ltr maximum.Output water quality confirming to standard IS : 10500 ( Latest)Type of mounting - wall mountingFrame - stainless steel ( SS-304)Inlet water - Normal water supply through tap ( borewell water)High pressure pump - Copper wound booster pump as per OEM standardMembrane type - 0.0001 mm RO membraneUV lamp acceptable range - as per OEM designPre filter- As per OEM designCarbon filter - As per OEM designWarranty - One Year as per OEM standardCapacity of water purifier -25 LPHIncluding Plumbing Job 10 S/F/F of Partition wall WITH Wooden frame (Imported Wood) and 10mm plywood on both sides. This also includes the P/F/F of wooden Door (Duly Polished ) with locking mechanism, hinges and handle and whatever is required on site. The plywood should be duly primered and painted. Size of 80 Sqft with the following Items1. Wooden Panelling with finishes on both Sides (150 Sqft)2.08 mm Plywood of 150 Sqft on both sides.3.Imported wood for Partition wall - 6 Ft32.Single leaf Wooden door of standard Size with locking mechanism, hinges and handles. Please Enable Macros to View BoQ information

INR 200 /-

INR 1.47 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB