Tender For Design, Supply, Installation, Testing And Commissioning Of 08 Passenger Lift(544 Kg) Stainless Steel Moon Light Finish/ Hair Line Finish/ Moon Rock Finish Elev22ator Of Machine Room Less Type With Following Specifications: Model: Machine Room Less Assembled Product: Passenger Elevator Capacity: 8 Persons, 544 Kg Speed: 1.00 M/S Stops & Openings: 3 Stops, 3 Openings Floor Designations: G+2 Machine Type & Location: Gearless Machine Located In The Shaft On Top Of Guiderails Control: Simplex Collective Selective Control Drive: Acvvvf Closed Loop Drive Power Supply: 415 Volts, 3 Phase, 50Hz, Ac Hoist Way Dimensions: 1820Mm Wide X 1800Mm Deep Car Travel: 6800Mm Overhead: 4500Mm Pit Depth: 1500Mm Car Dimensions: 1100 Mm Wide X 1300Mm Deep X 2100Mm High Door Opening: 800Mm Wide X 2000Mm High Car Door: 2 Panel Automatic Centre Opening With Acvf Drive In Stainless Steel Landing Door: 2 Panel Automatic Centre Opening In Stainless Steel Car Flooring: 2Mm Thick Pvc Flooring Natural Mirror In Car: Natural Mirror Of Half Car Height And Full Car Width Provided On Rear Wall Of Car Handrail: Round Handrail In Stainless Steel Finish Provided On Rear Wall Of Car Landing Operating Panel: Individual Landing Operating Panel For Each Elevator Make List: Otis / Kone / Thyssenkrupp / Mitsubishi / Fujitec India / Schindler / Hitachi. Accessories: Alarm Button In Car Operating Panel With Battery Back-Up, Automatic Operation For Car Fan, Adjustable Door Open Time, Axial Fan In Car For Ventilation, Braille On Push Buttons, Door Open And Door Close Buttons In Car Operating Panel, Emergency Light, Full Load By-Pass, Home Landing, Infra-Red Screen For Car Door, Intercom, Motor Overheat Protection Over Speed Protection/Sensor, Overload Function With Audio-Visual Indication In Car Operating Panel, Anti-Nuisance (Limit Number Of Car Call When Empty Load), Anti-Nuisance (Car Call Cancellation At Direction Reversal), Jammed Landing Operating Panel Call Button By-Pass, Phase Failure And Phase Reversal Protection, Automatic Rescue Device In Case Of Power Failure, Attendant Control Segmented Led White Display In Car Operating Panel, Segmented Led White Display In Landing Operating Panel On All Floors, Fireman Control. • Job On Turnkey Basis, Any Work/Items Not Mentioned In The Scope Of Work But Deemed Necessary For Completion And Commissioning Of This Project Shall Deemed To Be Included In The Scope Of Work. • Complete Job Including Cost Of Labour (Skilled & Unskilled), Crane, Scaffolding, Taxes, Transportation Etc. , Power Cable: Providing, Laying, Clamping And Thimbling Of New Minimum 50Sq Mmx4 Core, Pvc Inner-Sheathed, Xlpe Insulated Aluminium Armoured Cable Of Havells/Gloster/Kei/Polycab Make From Main Electric Panel To Servo And From Servo To Panel Of 01No Lift. Job Includes Proper Laying And Ms Clamping Of The Cable Along The Walls & Cable Tray, Thimbling The End Terminals Of The Cable With Thimbles And Crimping Them Properly With The Crimping Tool And Proper Insulation. Complete Job In All Respects Including Cost Of Material, Carriage, Skilled/Unskilled Labour Charges, Taxes Etc. , Servo: Supply, Installation, Testing And Commissioning Of Minimum 25Kva Servo Motor Controlled Oil Cooled Digital Microcontrolled Automatic Voltage Stabilizer To Operate On Un Balanced 3 Phase Load (Transformer Oil To Be Cooling Medium And Shall Be Isi Marked Is-335 With Latest Amendments) And Suitable To Operate On Unbalanced Input Phase Voltage Of 120 To 280 Volts(Phase To Neutral), Input Voltage Range 210-480V(Phase To Phase) And Delivering Voltage Of 415 ± 1 %, 3 Phase, 50 Hz ± 3 % Ac Power Supply. The Stabilizer Shall Be Copper Wound In Sheet Steel Case, Duly Painted And Filled With Transformer Oil. The Voltage Stabilizer Should Have Safety Of Single Phase Preventer And Phase Reversal. The Voltage Stabilizer Should Be Provided With 3 Phase Aluminium Bus Bar For Connection Of Lifts, Mccb Of Minimum Rating 100A-4P-50Ka And On Load Change Over Switch Of Minimum 100A, 4P Required To By-Pass The Voltage Stabilizer. Complete Job In All Respects Including Cost Of Material, Carriage, Skilled/Unskilled Labour Charges, Taxes Etc. , Earthing:- Suitable Chemical Earthing To The Lift Motor, Panel & Servo By Way Of Excavation Of Pit Of Proper Size Upto A Depth Of 03 Meter, Copper Electrode In Hard And Soft Soil Followed By Filling Of Required Quantity Of Earthing Chemical For Each Electrode And Connection With Gi Strips. Job Includes Filling Of Pit With Excavated Soil And Fitment Of Copper Electrode With Copper Strips. Complete Job In All Respects Including Cost Of Material, Carriage, Skilled/Unskilled Labour Charges, Taxes Etc. , Lighting & Electric Work: Providing And Fitting Of 15W Led Bulb With 6Amp Socket And 2.5Sqmm Wire For Connection Through Pvc Pipe/Batten At Every 10 Ft Throughout The Shaft Of One Lifts. Complete Job In All Respects Including Cost Of Material, Carriage, Skilled/Unskilled Labour Charges, Taxes Etc. , Providing And Fitting Of 4Pole Elcb & Mcb Of Suitable Capacity As Per Recommendation Of Lift Oem, With Box. Complete Job In All Respects, Wiring, Thimbling Including Cost Of Material, Carriage, Skilled/Unskilled Labour Charges, Taxes Etc. Complete Job In All Respects Including Cost Of Material, Carriage, Skilled/Unskilled Labour Charges, Taxes Etc. Please Enable Macros To View Boq Information Design, Supply, Installation, Testing and Commissioning of 08 passenger lift(544 kg) Stainless Steel moon light finish/ hair line finish/ moon rock finish Elev22ator of machine room less type with following specifications:Model: Machine Room LessAssembled Product: Passenger ElevatorCapacity: 8 persons, 544 kgSpeed: 1.00 m/sStops & Openings: 3 Stops, 3 OpeningsFloor designations: G+2Machine type & Location: Gearless machine located in the shaft on top of guiderails Control: Simplex Collective Selective ControlDrive: ACVVVF closed loop drivePower supply: 415 volts, 3 phase, 50Hz, ACHoist way dimensions: 1820mm wide x 1800mm deepCar travel: 6800mmOverhead: 4500mmPit depth: 1500mmCar dimensions: 1100 mm wide x 1300mm deep x 2100mm highDoor opening: 800mm wide x 2000mm highCar door: 2 panel automatic centre opening with ACVF drive in Stainless steel Landing door: 2 panel automatic centre opening in Stainless Steel Car flooring: 2mm thick PVC flooring Natural mirror in car: Natural mirror of half car height and full car width provided on rear wall of carHandrail: Round handrail in Stainless steel finish provided on rear wall of carLanding operating panel: Individual landing operating panel for each elevatorMake List: OTIS / Kone / ThyssenKrupp / Mitsubishi / Fujitec India / Schindler / Hitachi.Accessories: Alarm button in car operating panel with battery back-up, Automatic operation for car fan, Adjustable door open time, Axial fan in car for ventilation, Braille on push buttons, Door open and door close buttons in car operating panel, Emergency light, Full load by-pass, Home landing, Infra-red screen for car door, Intercom, Motor overheat protection over speed protection/sensor, Overload function with audio-visual indication in car operating panel, Anti-nuisance (limit number of car call when empty load), Anti-nuisance (car call cancellation at direction reversal), Jammed landing operating panel call button by-pass, Phase failure and phase reversal protection, Automatic rescue device in case of power failure, Attendant control Segmented LED White display in car operating panel, Segmented LED White display in landing operating panel on All Floors, Fireman control. • Job on Turnkey Basis, any work/items not mentioned in the scope of work but deemed necessary for completion and commissioning of this project shall deemed to be included in the scope of work. • Complete job including cost of labour (skilled & unskilled), crane, scaffolding, taxes, transportation etc. 2 Power Cable: Providing, Laying, Clamping and Thimbling of new minimum 50sq mmx4 Core, PVC inner-sheathed, XLPE insulated aluminium armoured cable of Havells/Gloster/KEI/Polycab make from main electric panel to Servo and from servo to panel of 01No lift. Job includes proper laying and MS clamping of the cable along the walls & cable tray, thimbling the end terminals of the cable with thimbles and crimping them properly with the crimping tool and proper insulation. Complete job in all respects including cost of material, carriage, Skilled/unskilled labour charges, taxes etc. 3 Servo: Supply, installation, testing and commissioning of minimum 25KVA Servo Motor controlled oil cooled digital microcontrolled Automatic Voltage Stabilizer to operate on un balanced 3 Phase load (Transformer oil to be cooling medium and shall be ISI marked IS-335 with latest amendments) and suitable to operate on unbalanced input phase voltage of 120 to 280 volts(phase to neutral), input voltage range 210-480V(phase to phase) and delivering voltage of 415 ± 1 %, 3 Phase, 50 Hz ± 3 % AC power supply. The stabilizer shall be copper wound in sheet steel case, duly painted and filled with transformer oil. The voltage stabilizer should have safety of single phase preventer and phase reversal. The voltage stabilizer should be provided with 3 phase Aluminium bus bar for connection of lifts, MCCB of minimum rating 100A-4P-50kA and on load change over switch of minimum 100A, 4P required to by-pass the voltage stabilizer. Complete job in all respects including cost of material, carriage, Skilled/unskilled labour charges, taxes etc. 4 Earthing:- Suitable chemical earthing to the lift motor, panel & servo by way of excavation of pit of proper size upto a depth of 03 meter, copper electrode in hard and soft soil followed by filling of required quantity of earthing chemical for each electrode and connection with GI strips. Job includes filling of pit with excavated soil and fitment of copper electrode with copper strips. Complete job in all respects including cost of material, carriage, Skilled/unskilled labour charges, taxes etc. 5 Lighting & Electric work: Providing and fitting of 15W LED bulb with 6amp socket and 2.5sqmm wire for connection through pvc pipe/batten at every 10 ft throughout the shaft of one lifts. Complete job in all respects including cost of material, carriage, Skilled/unskilled labour charges, taxes etc. 6 Providing and fitting of 4pole ELCB & MCB of suitable capacity as per recommendation of Lift OEM, with box. Complete job in all respects, wiring, thimbling including cost of material, carriage, Skilled/unskilled labour charges, taxes etc. Complete job in all respects including cost of material, carriage, Skilled/unskilled labour charges, taxes etc. Please Enable Macros to View BoQ information
