}

Tender For Erection Of 3 Nos6m Monopolesat Village Mandli,Billawar Dist Kathua Jk, kathua-Jammu And Kashmir

Tender Notice

51895694
Tender For Erection Of 3 Nos6m Monopolesat Village Mandli,Billawar Dist Kathua Jk
Tender
Indian
Jammu And Kashmir
Kathua
29-10-2025

Tender Details

Tender For Erection Of 3 Nos6m Monopolesat Village Mandli,Billawar Dist Kathua Jk; 1 Carrying of structural suitability survey for structural suitabilityof rented building for installation of monopole pipes including fittings and fixtures .( Item includes structural survey with required T&P and submitted report in hard copy ) 2 Transportation of all the 6m Monopoles materialincluding bracings, cleats, anchor fasteners and safely including loading, unloading and cartingofMonopoles material (upto thirdfloor) at the site of erection.(a) FromTelecom Store CTSD to Mandli(3 Nos.Monopoles along with its accessories) upto 120 Km. 3 Drilling holes in RCC members of 20mm and 150mm depth vertically in plumb, without damaging RCC members, cleaning the hole, filling withpressure gun the FISHERmake FISV 360S ör approved equivalent make chemical in required quantity as permanufacturers specifications, immediately fixing 16mm or 12mm dia 150mm longanchor fasteners of same make up to required depthin to it, all complete. In case existing reinforcement isencountered duringdrilling, the new hole to be made nearby for which nothing extra shall be paid.The rate includes cost of drilling extra holes if required and filling the failed holes with cement mortar 1 : 2 and disposal of dismantelled materials within 50 m lead including making good any damages to structure,etc.all complete.Note:The item includes cost for supplying 16 mm or 12 mm dia anchor fasteners and chemical FISV 360S of FISHER make or approved equivalent foras below.(i) Holes of 20mm Dia.x 150mmdepth for 16x150mm sizeAnchor Fasteners 4 Drilling holes in RCC members of 14mm and 100mm depth vertically in plumb, without damaging RCC members, cleaning the hole, filling withpressure gun the FISHERmake FISV 360S ör approved equivalent make chemical in required quantity as permanufacturers specifications, immediately fixing 16mm or 12mm dia 100mm longanchor fasteners of same make up to required depthin to it, all complete. In case existing reinforcement isencountered duringdrilling, the new hole to be made nearby for which nothing extra shall be paid.The rate includes cost of drilling extra holes if required and filling the failed holes with cement mortar 1 : 2 and disposal of dismantelled materials within 50 m lead including making good any damages to structure,etc.all complete.Note:The item includes cost for supplying 14 mm or 12 mm dia anchor fasteners and chemical FISV 360S of FISHER make or approved equivalent foras below.(i) Holes of 14mm Dia.x100mmdepth for M12x100mm sizeAnchor Fasteners 5 Supplying (at site) steel materials for tower ie the material required for tower, its ladder, working platform, wave guide rack (vertical), antenna fixtures, pipe stand for lightening arrestor, nuts & bolts, washers, templates, base plates etc. as required shall be provided in required sectional size and length including drilling holes for bolts etc. all conformity with the approved drawings of S.E.R.C.and as per the directions of Engineer-in-charge and shall be made out of pure virgin structural steel of approved companies viz. SAIL, TISCO, RINL etc.Notes : (1) All tower material to be hot dip galvanised. The tower material, fabrication & galvanising shall be as per the relevant IS code as well as S.E.R.C. recommendations.(2) This item does not include erection, priming and painting of the tower which shall be measured and paid under the separate item.(3) Measurement : Weight of all the material supplied (weight of each piece in exact length as required as per drawing) including weight of nuts / bolts & washers shall be measured for payment. (4) The rate includes cost of all material, their carriage, octroi etc. as well as labour and T & P necessary for straightening, cutting, filing, drilling etc. and hot dipped galvanising to all steel members. 6 Providing & laying cement concrete block in 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) of required size including centring and shuttering and finishing with 12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand) on top & all side of C.C. block up to the required floor level including fixing of tower member in cement concreteetc. all complete.as per the direction of Engineer-in-charge. (a) Block of size 0.60 x 0.60 x 0.45 m. (i) From Ground level to floor V level 7 Providing & laying cement concrete block in 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) of required size including centring and shuttering and finishing with 12mm cement plaster of mix 1:4 (1 cement : 4 coarse sand) on top & all side of C.C. block up to the required floor level including fixing of tower member in cement concreteetc. all complete.as per the direction of Engineer-in-charge. (a) Block of size 0.30 x 0.30 x 0.20 m. (i) From Ground level to floor V level 8 Labour for erection of 1 No. 6 Metre high monopole at its position upto 15 m height from ground level. The work shall include the following.(A) Erection of monopole including fitting and fixing up all the support members in position true to the alignment including assembling/ hoisting/ fixing of ladder, working platform, wave guide rack, lightening arrestor etc. at required level, all complete as per manufacturers drawings and as directed by Engineer in charge.The item includes enlargingholes, straightening of twisted or bend members of any type etc. and all other connected works for the above operation (if and as required) all complete as per direction of Engineer in charge. (This operation is only for labour charges for erection of one monopole and its support system.) NOTE :1. The item also includes for following and nothing extra shall be paid.(a) The agency shall take every precautions against the damages to the structure of nearby structures while erecting the tower. (b) Necessary safety precations to protect human lives, insurance cover to labour etc. shall be the sole responsiblity of the agency. Necessary insurance shall be procured by the agency for the labours carrying out the erection job.(c) Item includes for all operatins, T&P, equipments, machinery etc. for the work as well as safety measures. 2. The item does not include supply of monopole material/dismantling of old monopole and its transportation. This shall be paid under separate item, if and as required.3. Measurement : One job includes. (1) Erecting and vertical alignment of 6metre monopole with necessary antenna fixtures as per drawing.(2) Bracing / Tieing of the main pole with 2 Nos. of angle / pipes.

Key Value

Document Fees
INR 590 /-
Tender Value
INR 1.67 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail