Supply Bonifigloli Gear Box Spares On Arc Basis , Model-1: Model: As55 Df P112, Code: 1900000950717270002, Batch:6/19, V1, I:33:2, Application : I) Neutralization Tank Agitator Ii) Precipitation Tanks In Chemical House Iii) Causticization Tanks , Casing With Flange (Part No. 2) For Model-1 , Cover (Part No. 3) For Model-1 , Internal Support (Part No. 4) For Model-1 , Gasket (Part No. 5) For Model-1 , Gasket (Part No. 6) For Model-1 , Extended 1St Reduced Pinion (Part No. 7) For Model-1 , Bored 1St Reduced Pinion (Part No. 8) For Model-1 , Gear Wheel 1St Reduction (Part No. 9) For Model-1 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-1 , Pinion 3Rd Reduction (Part No. 11) For Model-1 , Gear Wheel (Part No. 12) For Model-1 , Cap (Part No. 13) For Model-1 , Bored Input Shaft (Part No. 14) For Model-1 , Oil Seal (Part No. 15) For Model-1 , Oil Seal (Part No. 16) For Model-1 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-1 , Bearing (Part No. 21) For Model-1 , Bearing (Part No. 22) For Model-1 , Bearing (Part No. 23) For Model-1 , Bearing (Part No. 24) For Model-1 , Key (Part No. 25) For Model-1 , Key (Part No. 26) For Model-1 , Key (Part No. 27) For Model-1 , Key (Part No. 28) For Model-1 , Key (Part No. 29) For Model-1 , Level Plug (Part No. 30) For Model-1 , Drain Plug (Part No. 31) For Model-1 , Breather Plug (Part No. 32) For Model-1 , Parallel Pin (Part No. 33) For Model-1 , Parallel Pin (Part No. 34) For Model-1 , Hex Head Screw (Part No. 35) For Model-1 , Hex Head Screw (Part No. 36) For Model-1 , Hex Head Screw (Part No. 37) For Model-1 , Circlip (Part No. 38) For Model-1 , Circlip (Part No. 41) For Model-1 , Circlip (Part No. 42) For Model-1 , 2 Nd Reduction Pinioin (Part No. 45) For Model-1 , Out Put Shaft (Part No. 47) For Model-1 , Spacer Ring (Part No. 48) For Model-1 , Circlip (Part No. 58) For Model-1 , Circlip (Part No. 39) For Model-1 , Extended Input Shaft (Part No. 50) For Model-1 , Key (Part No. 51) For Model-1 , Input Assembly , Output Assembly , Model-2: As60 Df P112, Code: I 11799930001,Batch:4/10, V1, I:37:1, Application : Feed Tank Agitator - Ssr , Casing With Flange (Part No. 2) For Model-2 , Cover (Part No. 3) For Model-2 , Internal Support (Part No. 4) For Model-2 , Gasket (Part No. 5) For Model-2 , Gasket (Part No. 6) For Model-2 , Extended 1St Reduced Pinion (Part No. 7) For Model-2 , Bored 1St Reduced Pinion (Part No. 8) For Model-2 , Gear Wheel 1St Reduction (Part No. 9) For Model-2 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-2 , Pinion 3Rd Reduction (Part No. 11) For Model-2 , Gear Wheel (Part No. 12) For Model-2 , Cap (Part No. 13) For Model-2 , Bored Input Shaft (Part No. 14) For Model-2 , Oil Seal (Part No. 15) For Model-2 , Oil Seal (Part No. 16) For Model-2 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-2 , Bearing (Part No. 21) For Model-2 , Bearing (Part No. 22) For Model-2 , Bearing (Part No. 23) For Model-2 , Bearing (Part No. 24) For Model-2 , Key (Part No. 25) For Model-2 , Key (Part No. 26) For Model-2 , Key (Part No. 27) For Model-2 , Key (Part No. 28) For Model-2 , Key (Part No. 29) For Model-2 , Level Plug (Part No. 30) For Model-2 , Drain Plug (Part No. 31) For Model-2 , Breather Plug (Part No. 32) For Model-2 , Parallel Pin (Part No. 33) For Model-2 , Parallel Pin (Part No. 34) For Model-2 , Hex Head Screw (Part No. 35) For Model-2 , Hex Head Screw (Part No. 36) For Model-2 , Hex Head Screw (Part No. 37) For Model-2 , Circlip (Part No. 38) For Model-2 , Circlip (Part No. 41) For Model-2 , Circlip (Part No. 42) For Model-2 , 2 Nd Reduction Pinioin (Part No. 45) For Model-2 , Circlip (Part No. 58) For Model-2 , Circlip (Part No. 39) For Model-2 , Extended Input Shaft (Part No. 50) For Model-2 , Key (Part No. 51)For Model-2 , Spacer Ring (Part No. 46) For Model-2 , Out Put Shaft (Part No. 49) For Model-2 , Circlip (Part No. 57) For Model-2 , Input Assembly , Output Assembly , Model-3: As60 Df P132, Code:I11800030001, Batch:4/10, V1, I:33:4,Application : I) Filtrate Tank Agitator - Ssr & Ii) Gsm Tank - Ssr Iii) Clarifier Underflow Tank , Casing With Flange (Part No. 2) For Model-3 , Cover (Part No. 3) For Model-3 , Internal Support (Part No. 4) For Model-3 , Gasket (Part No. 5) For Model-3 , Gasket (Part No. 6) For Model-3 , Extended 1St Reduced Pinion (Part No. 7) For Model-3 , Bored 1St Reduced Pinion (Part No. 8) For Model-3 , Gear Wheel 1St Reduction (Part No. 9) For Model-3 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-3 , Pinion 3Rd Reduction (Part No. 11) For Model-3 , Gear Wheel (Part No. 12) For Model-3 , Cap (Part No. 13) For Model-3 , Bored Input Shaft (Part No. 14) For Model-3 , Oil Seal (Part No. 15) For Model-3 , Oil Seal (Part No. 16) For Model-3 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-3 , Bearing (Part No. 21) For Model-3 , Bearing (Part No. 22) For Model-3 , Bearing (Part No. 23) For Model-3 , Bearing (Part No. 24) For Model-3 , Key (Part No. 25) For Model-3 , Key (Part No. 26) For Model-3 , Key (Part No. 27) For Model-3 , Key (Part No. 28) For Model-3 , Key (Part No. 29) For Model-3 , Level Plug (Part No. 30) For Model-3 , Drain Plug (Part No. 31) For Model-3 , Breather Plug (Part No. 32) For Model-3 , Parallel Pin (Part No. 33) For Model-3 , Parallel Pin (Part No. 34) For Model-3 , Hex Head Screw (Part No. 35) For Model-3 , Hex Head Screw (Part No. 36) For Model-3 , Hex Head Screw (Part No. 37) For Model-3 , Circlip (Part No. 38) For Model-3 , Circlip (Part No. 41) For Model-3 , Circlip (Part No. 42) For Model-3 , 2 Nd Reduction Pinioin (Part No. 45) For Model-3 , Circlip (Part No. 58) For Model-3 , Circlip (Part No. 39) For Model-3 , Extended Input Shaft (Part No. 50) For Model-3 , Key (Part No. 51) For Model-3 , Spacer Ring (Part No. 46) For Model-3 , Out Put Shaft (Part No. 49) For Model-3 , Circlip (Part No. 57) For Model-3 , Input Assembly , Output Assembly , Model-4: As60 Df P132 V1, Code: I 11520980002, I: 25.47, Application : Dirty Wash Water Tank , Casing With Flange (Part No. 2) For Model-4 , Cover (Part No. 3) For Model-4 , Internal Support (Part No. 4) For Model-4 , Gasket (Part No. 5) For Model-4 , Gasket (Part No. 6) For Model-4 , Extended 1St Reduced Pinion (Part No. 7) For Model-4 , Bored 1St Reduced Pinion (Part No. 8) For Model-4 , Gear Wheel 1St Reduction (Part No. 9) For Model-4 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-4 , Pinion 3Rd Reduction (Part No. 11) For Model-4 , Gear Wheel (Part No. 12) For Model-4 , Cap (Part No. 13) For Model-4 , Bored Input Shaft (Part No. 14) For Model-4 , Oil Seal (Part No. 15) For Model-4 , Oil Seal (Part No. 16) For Model-4 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-4 , Bearing (Part No. 21) For Model-4 , Bearing (Part No. 22) For Model-4 , Bearing (Part No. 23) For Model-4 , Bearing (Part No. 24) For Model-4 , Key (Part No. 25) For Model-4 , Key (Part No. 26) For Model-4 , Key (Part No. 27) For Model-4 , Key (Part No. 28) For Model-4 , Key (Part No. 29) For Model-4 , Level Plug (Part No. 30) For Model-4 , Drain Plug (Part No. 31) For Model-4 , Breather Plug (Part No. 32) For Model-4 , Parallel Pin (Part No. 33) For Model-4 , Parallel Pin (Part No. 34) For Model-4 , Hex Head Screw (Part No. 35) For Model-4 , Hex Head Screw (Part No. 36) For Model-4 , Hex Head Screw (Part No. 37) For Model-4 , Circlip (Part No. 38) For Model-4 , Circlip (Part No. 41) For Model-4 , Circlip (Part No. 42) For Model-4 , 2 Nd Reduction Pinioin (Part No. 45) For Model-4 , Circlip (Part No. 58) For Model-4 , Circlip (Part No. 39) For Model-4 , Extended Input Shaft (Part No. 50) For Model-4 , Key (Part No. 51) For Model-4 , Spacer Ring (Part No. 46) For Model-4 , Out Put Shaft (Part No. 49) For Model-4 , Circlip (Part No. 57) For Model-4 , Input Assembly , Output Assembly , Model-5: As80 Df P160, Code:I11837100001,Batch:5/10, V1, I:31:2 & Application : Crystalizer Tank Agtitator , Casing With Flange (Part No. 2) For Model-5 , Cover (Part No. 3) For Model-5 , Internal Support (Part No. 4) For Model-5 , Gasket (Part No. 5) For Model-5 , Gasket (Part No. 6) For Model-5 , Extended 1St Reduced Pinion (Part No. 7) For Model-5 , Bored 1St Reduced Pinion (Part No. 8) For Model-5 , Gear Wheel 1St Reduction (Part No. 9) For Model-5 , Gear Wheel 2Nd Reduction (Part No. 10) For Model-5 , Pinion 3Rd Reduction (Part No. 11) For Model-5 , Gear Wheel (Part No. 12) For Model-5 , Cap (Part No. 13) For Model-5 , Bored Input Shaft (Part No. 14) For Model-5 , Oil Seal (Part No. 15) For Model-5 , Oil Seal (Part No. 16) For Model-5 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-5 , Bearing (Part No. 21) For Model-5 , Bearing (Part No. 22) For Model-5 , Bearing (Part No. 23) For Model-5 , Bearing (Part No. 24) For Model-5 , Key (Part No. 25) For Model-5 , Key (Part No. 26) For Model-5 , Key (Part No. 27) For Model-5 , Key (Part No. 28) For Model-5 , Key (Part No. 29) For Model-5 , Level Plug (Part No. 30) For Model-5 , Drain Plug (Part No. 31) For Model-5 , Breather Plug (Part No. 32) For Model-5 , Parallel Pin (Part No. 33) For Model-5 , Parallel Pin (Part No. 34) For Model-5 , Hex Head Screw (Part No. 35) For Model-5 , Hex Head Screw (Part No. 36) For Model-5 , Hex Head Screw (Part No. 37) For Model-5 , Circlip (Part No. 38) For Model-5 , Circlip (Part No. 41) For Model-5 , Circlip (Part No. 42) For Model-5 , 2 Nd Reduction Pinioin (Part No. 45) For Model-5 , Circlip (Part No. 58) For Model-5 , Circlip (Part No. 39) For Model-5 , Extended Input Shaft (Part No. 50) For Model-5 , Key (Part No. 51) For Model-5 , Spacer Ring (Part No. 46) For Model-5 , Circlip (Part No. 40) For Model-5 , Out Put Shaft (Part No. 49) For Model-5 , Circlip (Part No. 57) For Model-5 , Spacer Ring (Part No. 59) For Model-5 , Circlip (Part No. 39) For Model-5 , Input Assembly , Output Assembly , Model:6 As55 F P100, Code: I11825510001 / 2, Batch:5/10, V1, I: 25:84,Application : Mother Liquor Tank Agitator -Ssr , Casing With Flange (Part No. 2) For Model-6 , Cover (Part No. 3) For Model-6 , Cap (Part No. 5) For Model-6 , Internal Support (Part No. 4) For Model-6 , Gasket (Part No. 6) For Model-6 , Gasket (Part No. 7) For Model-6 , Extended 1St Reduced Pinion (Part No. 8) For Model-6 , Bored 1St Reduced Pinion (Part No. 9) For Model-6 , Gear Wheel 1St Reduction (Part No. 10) For Model-6 , Pinion 2Nd Reduction (Part No. 11) For Model-6 , Gear Wheel, 2Nd Reduction (Part No. 12) For Model-6 , Bored Input Shaft (Part No. 13) For Model-6 , Extended Input Shaft (Part No. 14) For Model-6 , Oil Seal (Part No. 15) For Model-6 , Oil Seal (Part No. 16) For Model-6 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-6 , Bearing (Part No. 21) For Model-6 , Bearing (Part No. 22) For Model-6 , Key (Part No. 23) For Model-6 , Key (Part No. 24) For Model-6 , Key (Part No. 25) For Model-6 , Key (Part No. 26) For Model-6 , Key (Part No. 27) For Model-6 , Key (Part No. 28) For Model-6 , Level Plug (Part No. 29) For Model-6 , Drain Plug (Part No. 30) For Model-6 , Breather Plug (Part No. 31) For Model-6 , Parallel Pin (Part No. 32) For Model-6 , Parallel Pin (Part No. 33) For Model-6 , Hex Head Screw (Part No. 34) For Model-6 , Hex Head Screw (Part No. 35) For Model-6 , Hex Head Screw (Part No. 36) For Model-6 , Circlip (Part No. 37) For Model-6 , Circlip (Part No. 38) For Model-6 , Circlip (Part No. 39) For Model-6 , Circlip (Part No. 40) For Model-6 , Circlip (Part No. 43) For Model-6 , Out Put Shaft (Part No. 41) For Model-6 , Spacer Ring (Part No. 42) For Model-6 , Spacer Ring (Part No. 46) For Model-6 , Input Assembly , Output Assembly , Model-7: As30 F P80 V1, Code: I 11415010002, I- 24.19, Application : Agitators Of Floculant Transfer Tanks(14 V - 13C/D) , Casing With Flange (Part No.2) For Model-7 , Casing With Reducer Flange (Part No.2/1) For Model-7 , Cover (Part No.3) For Model-7 , Internal Support (Part No.4) For Model-7 , Second Recuction Pinion (Part No.5) For Model-7 , 1 St Recduction Gear Wheel (Part No.6) For Model-7 , Extended 1St Reduced Pinion (Part No.7) For Model-7 , Bored 1St Reduced Pinion (Part No.8) For Model-7 , Bored Input Shaft (Part No.9) For Model-7 , Extended Input Shaft (Part No.10) For Model-7 , Gasket (Part No.11) For Model-7 , Gasket (Part No.12) For Model-7 , Oil Seal (Part No.19) For Model-7 , Oil Seal (Part No.20) For Model-7 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No.16) For Model-7 , Bearing (Part No.17) For Model-7 , Bearing (Part No.18) For Model-7 , Key (Part No.21) For Model-7 , Key (Part No.22) For Model-7 , Key (Part No.23) For Model-7 , Key (Part No.25) For Model-7 , Circlip (Part No.26) For Model-7 , Circlip (Part No.27) For Model-7 , Circlip (Part No.28) For Model-7 , Circlip (Part No.29) For Model-7 , Circlip (Part No.48) For Model-7 , Circlip (Part No.49) For Model-7 , Circlip (Part No.31) For Model-7 , Parallel Pin (Part No.32) For Model-7 , Parallel Pin (Part No.33) For Model-7 , Washer (Part No.34) For Model-7 , Drain Plug For Mod-7 , Hex Head Screw (Part No.35) For Model-7 , Hex Head Screw (Part No.36) For Model-7 , Hex Head Screw (Part No.37) For Model-7 , Stud Bolts For Mod-7 , Hexagonal Nutfor Mod-7 , Spacer Ring (Part No.38) For Model-7 , Key (Part No.24) For Model-7 , Circlip (Part No.30) For Model-7 , Out Put Shaft (Part No.44) For Model-7 , 2Nd Reduction Gear Wheel (Part No.45) For Model-7 , Spacer Ring (Part No.46) For Model-7 , Cap (Part No.47) For Model-7 , Input Assembly , Output Assembly , Model-8: As45 F P100 V1, Code: I 11072210004, I-25.55, Application : Agitatorsof Floculant Preparation Tanks (14V - 12 A/B/C/D ) , Casing With Flange (Part No. 2) For Model-8 , Cover (Part No. 3) For Model-8 , Cap (Part No. 5) For Model-8 , Internal Support (Part No. 4) For Model-8 , Gasket (Part No. 6) For Model-8 , Gasket (Part No. 7) For Model-8 , Extended 1St Reduced Pinion (Part No. 8) For Model-8 , Bored 1St Reduced Pinion (Part No. 9) For Model-8 , Gear Wheel 1St Reduction (Part No. 10) For Model-8 , Pinion 2Nd Reduction (Part No. 11) For Model-8 , Gear Wheel, 2Nd Reduction (Part No. 12) For Model-8 , Bored Input Shaft (Part No. 13) For Model-8 , Extended Input Shaft (Part No. 14) For Model-8 , Oil Seal (Part No. 15) For Model-8 , Oil Seal (Part No. 16) For Model-8 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-8 , Bearing (Part No. 21) For Model-8 , Bearing (Part No. 22) For Model-8 , Key (Part No. 23) For Model-8 , Key (Part No. 24) For Model-8 , Key (Part No. 25) For Model-8 , Key (Part No. 26) For Model-8 , Key (Part No. 27) For Model-8 , Key (Part No. 28) For Model-8 , Level Plug (Part No. 29) For Model-8 , Drain Plug (Part No. 30) For Model-8 , Breather Plug (Part No. 31) For Model-8 , Parallel Pin (Part No. 32) For Model-8 , Parallel Pin (Part No. 33) For Model-8 , Hex Head Screw (Part No. 34) For Model-8 , Hex Head Screw (Part No. 35) For Model-8 , Hex Head Screw (Part No. 36) For Model-8 , Circlip (Part No. 37) For Model-8 , Circlip (Part No. 38) For Model-8 , Circlip (Part No. 39) For Model-8 , Circlip (Part No. 40) For Model-8 , Circlip (Part No. 43) For Model-8 , Out Put Shaft (Part No. 41) For Model-8 , Spacer Ring (Part No. 42) For Model-8 , Spacer Ring (Part No. 46) For Model-8 , Input Assembly , Output Assembly , Model-9: As45 F P100 B5 V1, Code: 16A000006012210001, I-15.83,Application : Agitators For Floculant Transfer Tanks (14 V - 13 A / B) , Casing With Flange (Part No. 2) For Model-9 , Cover (Part No. 3) For Model-9 , Cap (Part No. 5) For Model-9 , Internal Support (Part No. 4) For Model-9 , Gasket (Part No. 6) For Model-9 , Gasket (Part No. 7) For Model-9 , Extended 1St Reduced Pinion (Part No. 8) For Model-9 , Bored 1St Reduced Pinion (Part No. 9) For Model-9 , Gear Wheel 1St Reduction (Part No. 10) For Model-9 , Pinion 2Nd Reduction (Part No. 11) For Model-9 , Gear Wheel, 2Nd Reduction (Part No. 12) For Model-9 , Bored Input Shaft (Part No. 13) For Model-9 , Extended Input Shaft (Part No. 14) For Model-9 , Oil Seal (Part No. 15) For Model-9 , Oil Seal (Part No. 16) For Model-9 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-9 , Bearing (Part No. 21) For Model-9 , Bearing (Part No. 22) For Model-9 , Key (Part No. 23) For Model-9 , Key (Part No. 24) For Model-9 , Key (Part No. 25) For Model-9 , Key (Part No. 26) For Model-9 , Key (Part No. 27) For Model-9 , Key (Part No. 28) For Model-9 , Level Plug (Part No. 29) For Model-9 , Drain Plug (Part No. 30) For Model-9 , Breather Plug (Part No. 31) For Model-9 , Parallel Pin (Part No. 32) For Model-9 , Parallel Pin (Part No. 33) For Model-9 , Hex Head Screw (Part No. 34) For Model-9 , Hex Head Screw (Part No. 35) For Model-9 , Hex Head Screw (Part No. 36) For Model-9 , Circlip (Part No. 37) For Model-9 , Circlip (Part No. 38) For Model-9 , Circlip (Part No. 39) For Model-9 , Circlip (Part No. 40) For Model-9 , Circlip (Part No. 43) For Model-9 , Out Put Shaft (Part No. 41) For Model-9 , Spacer Ring (Part No. 42) For Model-9 , Spacer Ring (Part No. 46) For Model-9 , Input Assembly , Output Assembly , Model-10: As45 F P100 V1, Code: I11415320003, I-27.45, Application : I) Product Holding Tanks ( 8V - 2A/B)& Ii) Strong Liquor Oht Tank , Casing With Flange (Part No. 2) For Model-10 , Cover (Part No. 3) For Model-10 , Cap (Part No. 5) For Model-10 , Internal Support (Part No. 4) For Model-10 , Gasket (Part No. 6) For Model-10 , Gasket (Part No. 7) For Model-10 , Extended 1St Reduced Pinion (Part No. 8) For Model-10 , Bored 1St Reduced Pinion (Part No. 9) For Model-10 , Gear Wheel 1St Reduction (Part No. 10) For Model-10 , Pinion 2Nd Reduction (Part No. 11) For Model-10 , Gear Wheel, 2Nd Reduction (Part No. 12) For Model-10 , Bored Input Shaft (Part No. 13) For Model-10 , Extended Input Shaft (Part No. 14) For Model-10 , Oil Seal (Part No. 15) For Model-10 , Oil Seal (Part No. 16) For Model-10 , Gear Head / Box , In Put Assembly , Out Put Assembly , Bearing (Part No. 20) For Model-10 , Bearing (Part No. 21) For Model-10 , Bearing (Part No. 22) For Model-10 , Key (Part No. 23) For Model-10 , Key (Part No. 24) For Model-10 , Key (Part No. 25) For Model-10 , Key (Part No. 26) For Model-10 , Key (Part No. 27) For Model-10 , Key (Part No. 28) For Model-10 , Level Plug (Part No. 29) For Model-10 , Drain Plug (Part No. 30) For Model-10 , Breather Plug (Part No. 31) For Model-10 , Parallel Pin (Part No. 32) For Model-10 , Parallel Pin (Part No. 33) For Model-10 , Hex Head Screw (Part No. 34) For Model-10 , Hex Head Screw (Part No. 35) For Model-10 , Hex Head Screw (Part No. 36) For Model-10 , Circlip (Part No. 37) For Model-10 , Circlip (Part No. 38) For Model-10 , Circlip (Part No. 39) For Model-10 , Circlip (Part No. 40) For Model-10 , Circlip (Part No. 43) For Model-10 , Out Put Shaft (Part No. 41) For Model-10 , Spacer Ring (Part No. 42) For Model-10 , Spacer Ring (Part No. 46) For Model-10 , Model-11: (Newly Addedmodel)As55 Fp 112, Code: I11825510001 / 2, Batch:5/10, V1, I:25:84 Application : I) Mother Liquor Tank Agitator- Ccr Ii) Seal Pot , Casing With Flange(Part No.2) For Model-11 , Cover (Part No.3)For Model-11 , Internal Support (Part No.4)For Model-11 , Gasket (Part No.5)For Model-11 , Gasket (Part No.6 F)For Model-11 , Extended 1St Reduced Pinion (Part No.7) For Model-11 , Bored 1St Reduced Pinion (Part No.8) For Model-11 , Gear Wheel 1St Reduction (Part No.9)For Model-11 , Gear Wheel 2Nd Reduction (Part No.10)For Model-11 , Pinion 3Rd Reduction (Part No.11) For Model-11 , Gear Wheel (Part No.12)For Model-11 , Cap (Part No.13)For Model-11 , Bored Input Shaft (Part No.14) For Model-11 , Oil Seal (Part No.15) For Model-11 , Oil Seal (Part No.16) For Model-11 , Bearing (Part No.17) For Model-11 , Bearing (Part No.18) For Model-11 , Bearing (Partno.19)For Model-11 , Bearing (Part No.20)For Model-11 , Bearing (Part No.21) For Model-11 , Bearing (Part No.22) For Model-11 , Bearing (Part No.23) For Model-11 , Bearing (Part No.24)For Model-11 , Key (Part No.25) For Model-11 , Key (Part No.26) For Model-11 , Key (Part No.27) For Model-11 , Key (Part No.28) For Model-11 , Key (Part No.29) For Model-11 , Level Plug (Part No.30) For Model-11 , Drain Plug (Part No.31) For Model-11 , Breather Plug (Part No.32) For Model-11 , Parallel Pin (Part No.33) For Model-11 , Parallel Pin (Part No.34) For Model-11 , Hex Head Screw (Part No.35) For Model-11 , Hex Head Screw (Part No.36) For Model-11 , Hex Head Screw (Part No.37) For Model-11 , Circlip (Part No.38) For Model-11 , Circlip (Part No.41) For Model-11 , Circlip (Partno.42) For Model-11 , 2 Nd Reduction Pinioin (Part No.45) For Model-11 , Out Put Shaft (Part No.47) For Model-11 , Spacer Ring (Part No.48) For Model-11 , Circlip (Part No.58) For Model-11 , Circlip (Pat No.39) For Odel-11 , Extended Input Shaft (Part No.50) For Model-11 , Key (Part No.51) For Model-11 , Input Assembly , Output Assembly , Model-12: (Newly Addedmodel) As 35 Fp 100 ;V1, I:15.37 Application :I) Agitators Offloculant Preparation At Uctl-3 Chemical House , Casing With Flange (Part No.2) For Model-12 , Casing With Reducer Flange (Part No.2/1) For Model-12 , Cover (Part No.3) For Model-12 , Internal Support (Part No.4) For Model-12 , Second Recuction Pinion (Part No.5) For Model-12 , 1 St Recduction Gear Wheel (Part No.6) For Model-12 , Extended 1St Reduced Pinion (Part No.7) For Model-12 , Bored 1St Reduced Pinion (Part No.8) For Model-12 , Bored Input Shaft (Part No.9) For Model-12 , Extended Input Shaft (Part No.10) For Model-12 , Gasket (Part No.11) For Model-12 , Gasket (Part No.12) For Model-12 , Oil Seal (Part No.19) For Model-12 , Oil Seal (Part No.20) For Model-12 , Bearing (Part No.13) For Model-12 , Bearing (Part No.14) For Model-12 , Bearing (Part No.15) For Model-12 , Bearing (Part No.16) For Model-12 , Bearing (Part No.17) For Model-12 , Bearing (Part No.18) For Model-12 , Key (Part No.21) For Model-12 , Key (Part No.22) For Model-12 , Key (Part No.23) For Model-12 , Key (Part No.25) For Model-12 , Circlip (Part No.26) For Model-12 , Circlip (Part No.27) For Model-12 , Circlip (Part No.28) For Model-12 , Circlip (Part No.29) For Model-12 , Circlip (Part No.48) For Model-12 , Circlip (Part No.49) For Model-12 , Circlip (Part No.31) For Model-12 , Parallel Pin (Part No.32) For Model-12 , Parallel Pin (Part No.33) For Model-12 , Washer (Part No.34) For Model-12 , Drain Plug (Part No.29) For Model-12 , Hex Head Screw (Part No.35) For Model-12 , Hex Head Screw (Part No.36) For Momdel-12 , Hex Head Screw (Part No.37) For Model-12 , Stud Bolts (Part No.36)For Model-12 , Hexagonal Nut (Part No.37) For Model-12 , Spacer Ring (Part No.38) For Model-12 , Key (Part No.24) For Model-12 , Circlip (Part No.30) For Model-12 , Out Put Shaft (Part No.44) For Model-12 , 2Nd Reduction Gear Wheel (Part No.45) For Model-12 , Spacr Ring (Part No.46) For Model-2 , Cap (Part No.47) For Model-12 , Input Assembly , Otput Assembly
