Bids Are Invited For . Beagle Bone Black REV C a) Processor: TI Sitara AM3358AZCZ100, 1GHz, 2000 MIPS a. 1 GHz ARM® Cortex™-A8 b. SGX530 Graphics Engine c. Programmable Real-Time Unit Subsystem b) Memory: a. SDRAM: 512MB DDR3L 800MHZ b. Onboard Flash: 4GB, 8bit Embedded MMC (eMMC) c) SD/MMC Connector for microSD d) Power management: TPS65217C PMIC is used along with a separate LDO to provide power to the system e) Debug Support: Optional Onboard 20-pin CTI JTAG, Serial Header f) Power Source: a. Mini USB or DC Jack b. 5VDC External Via Expansion Header g) Connectivity: a. High speed USB 2.0 Client port: Access to USB0, Client mode via Mini USB b. High Speed USB 2.0 Host port: Access to USB1, Type A Socket, 500mA LS/FS/HS c. Serial Port: UART0 access via 6 pin 3.3V TTL Header. Header is populated d. 10/100M Ethernet (RJ45) h) User Input / Output: a. Reset Button b. Boot Button c. Power Button d. LED power indicator e. 4 user configurable LEDs i) Video/Audio Interfaces: a. HDMI D type interface b. LCD interface c. Stereo audio over HDMI interface j) Expansion Interfaces: a. LCD, UART, eMMC b. ADC, I2C, SPI, PWM k) Includes: a. Beagle Bone Black Board b. Mini USB to USB Type A Cable c. Quick Start Guide b. Zolertia Firefly • ARM Cortex-M3 with 512KB flash and 32KB RAM (16KB retention), 32MHz. • ISM 2.4-GHz IEEE 802.15.4 & Zigbee compliant. • ISM 868-, 915-, 920-, 950-MHz ISM/SRD Band. • On-board printed PCB sub-1GHz antenna, ceramic antenna for 2.4GHz interface. Alternatively.FL for sub-1GHz external antenna. • AES-128/256, SHA2 Hardware Encryption Engine. • ECC-128/256, RSA Hardware Acceleration Engine for Secure Key Exchange. • Compatible with breadboards and protoboards. • On-board CP2104/PIC to flash over PCB USB. • User and reset buttons. • RGB LED to allow more than 7 colour combinations. • Small form factor (68x25mm) including USB. • the firefly includes a PCB antenna for the Sub-1GHz interface, as well as 2 x u.Fl connectors for 2.4GHz and sub-1GHz external antennas. c. Raspberry Pi 5 Model 8GB Kit • Raspberry Pi 5 Board: Features a 2.4GHz quad-core 64-bit ARM Cortex-A76 processor for improved performance. • Official Raspberry Pi 5 Case: Durable and well-ventilated case designed to house and protect the Raspberry Pi 5. • 27W USB-C Power Supply: Provides stable power for high-performance computing and peripherals. • Official Raspberry Pi Keyboard & Mouse: Includes a full-sized keyboard and an ergonomic mouse for seamless desktop use. • 32GB MicroSD Card (Preloaded with Raspberry Pi OS): Comes with Raspberry Pi OS pre-installed for quick setup and ready-to-use experience. • Micro HDMI to HDMI Cables: Supports dual 4K display output for enhanced multitasking and media applications. • Raspberry Pi Beginner’s Guide (5th Edition): Comprehensive manual for setup, configuration, and project ideas. d. Raspberry Pi 5 4GB Starter Kit • Raspberry Pi 5 Board: Features a 2.4GHz quad-core 64-bit ARM Cortex-A76 processor for improved performance. • Official Raspberry Pi 5 Case: Durable and well-ventilated case designed to house and protect the Raspberry Pi 5. • 27W USB-C Power Supply: Provides stable power for high-performance computing and peripherals. • Official Raspberry Pi Keyboard & Mouse: Includes a full-sized keyboard and an ergonomic mouse for seamless desktop use. • 32GB MicroSD Card (Preloaded with Raspberry Pi OS): Comes with Raspberry Pi OS pre-installed for quick setup and ready-to-use experience. • Micro HDMI to HDMI Cables: Supports dual 4K display output for enhanced multitasking and media applications. • Raspberry Pi Beginner’s Guide (5th Edition): Comprehensive manual for setup, configuration, and project ideas. e. Raspberry Pi 4 Model B 4GB Starter Kit • Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz • 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model) • 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE • Gigabit Ethernet • 2 USB 3.0 ports; 2 USB 2.0 ports. • Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards) • 2 × micro-HDMI ports (up to 4kp60 supported) • 2-lane MIPI DSI display port • 2-lane MIPI CSI camera port • 4-pole stereo audio and composite video port • H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode) • OpenGL ES 3.1, Vulkan 1.0 • Micro-SD card slot for loading operating system and data storage • 5V DC via USB-C connector (minimum 3A*) • 5V DC via GPIO header (minimum 3A*) • Power over Ethernet (PoE) enabled (requires separate PoE HAT) • Operating temperature: 0 – 50 degrees C ambient f. Raspberry Pi Zero 2 W • 1GHz quad-core 64-bit Arm Cortex-A53 CPU • 512MB SDRAM • 2.4GHz 802.11 b/g/n wireless LAN • Bluetooth 4.2, Bluetooth Low Energy (BLE), onboard antenna • Mini HDMI® port and micro USB On-The-Go (OTG) port • microSD card slot • CSI-2 camera connector • HAT-compatible 40-pin header footprint (unpopulated) • H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30) • OpenGL ES 1.1, 2.0 graphics • Micro USB power • Composite video and reset pins via solder test points • 65mm x 30mm g. Nordic nRF52840DK • Bluetooth 5.4 SoC supporting Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee • 64 MHz Arm Cortex-M4 with FPU • 1 MB Flash, 256 KB RAM • 2 Mbps, 1 Mbps, Long Range • Bluetooth Low Energy • Bluetooth mesh • Thread, Zigbee • +8 dBm TX Power • 128-bit AES CCM, Arm CryptoCell-310 • UART, SPI, TWI, PDM, I2S, QSPI, PWM • 12-bit ADC • NFC • USB 2.0 h. Microchip SAMR21 • Atmel ATSAMR21G18A microcontroller • Embedded debugger (EDBG) * USB interface * Programming and debugging on board SAM R21 through Serial Wire Debug (SWD) * Virtual COM-port interface to target via UART * Atmel Data Gateway Interface (DGI) to target via SPI and TWI * Four GPIOs connected to target for code instrumentation • Digital I/O * Two mechanical buttons (user and reset button) * One user LED * Two extension headers • Antenna * One ceramic chip antenna (2450AT18D0100) * One SMA connector for external antenna • Three possible power sources * External power * Embedded debugger USB * Target USB • 32kHz crystal • 16MHz crystal • USB interface, device i. Vision Five2 RISC-V 4GB RAM Single Board Computer • Processor: Star Five JH7110 • CPU: RISC-V U74 Quad-core 64-bit RV64GC ISA SoC With 2MB L2 cache and S7 core, operating frequency up to 1.5GHz • GPU: IMG BXE-4-32 MC1, operating frequency up to 600MHz • Memory: Options for 4G/8G Byte LPDDR4 • Storage: TF card (included in the Display Kit, Starter Kit and Starter Box Kit) • Camera: MIPI CSI 2lane 1080p@30fps • Display: * 1 × 2-lane MIPI DSI 1080p@30fps * 1 × 4-lane MIPI DSI 2K@30fps (Only one DSI port can be used for display * at the same time) * 1 × HDMI 2.0 4K@30fps, 2K@60fps • USB Host: 4 × USB 3.0 Type-A port • USB Device: 1 × USB Device (multiplexed with the USB Type-C port) • Networking: 2 × Gigabit Ethernet port (1-ch with PoE function) • Reset button: Press the reset button to reboot when in the U-boot mode; • Press and hold the reset button for three seconds to reboot after the system boots • Other interfaces: 40PIN GPIO * M.2 M-Key Solid State Drive socket * eMMC socket * 2PIN Fan header * 3.5mm Audio Jack, 4-pole stereo audio jack • Dimensions: 100 × 74 × 21 (mm) • Case Dimensions: 106 × 79.5 × 31 (mm) • Compliance: RoHS, FCC, CE • Recommended Operating Ambient Temperature: 0~50℃ (If the operating temperature of the chip exceeds 85°C, the frequency and voltage of the CPU will be automatically reduced for cooling) j. BEAGLEBOARD Beagle V-Ahead, T-Head TH1520, RISC-V • Processor: T-Head TH1520 (quad-core Xuantie C910 processor) • PMIC: DA9063 • Memory: 4GB LPDDR4 • Storage: 16GB eMMC • Wi-Fi/Bluetooth: • PHY: AP6203BM • Antennas: 2.4GHz & 5GHz • Ethernet: • PHY: Realtek RTL8211F-VD-CG Gigabit Ethernet phy • Connector: integrated magnetics RJ-45 • microUSB 3.0: • Connectivity: USB OTG, Flash support • Power: Input: 5V @ <To-Do>, Output: 5V @ <To-Do> • HDMI: • Transmitter: TH1520 Video out system • Connector: Mini HDMI • Other connectors: • microSD • mikro BUS shuttle connector (I2C/UART/SPI/ADC/PWM/GPIO) • 2 x CSI connector compatible with Beagle Bone AI-64, Raspberry Pi Zero / CM4 (22-pin) • DSI connector k. Maixduino AI Development Kit K210 RISC-V AI + lOT ESP32 K210 Chip • Core: RISC-V Dual Core 64bit, with FPU • Frequency: 400MHz (Can be overclocked to 600MHz) • SRAM: Built-in 8MB • Image Recognition: QVGA@60fps/VGA@30fps • Speech Recognition: Microphone array (8mics) Total Quantity : 83
