}

Tender For Condition Based Monitoring Of Ocsl Plant Equipments And Conveyors Of Biom Bacheli Complex, bacheli-Chhattisgarh

Tender Notice

51867576
Tender For Condition Based Monitoring Of Ocsl Plant Equipments And Conveyors Of Biom Bacheli Complex
Tender
Indian
Chhattisgarh
Bacheli
14-11-2025

Tender Details

Tender For Condition Based Monitoring Of Ocsl Plant Equipments And Conveyors Of Biom Bacheli Complex; 1.Occasional violation of not wearing crash helmet in works/ office area ₹ 1000/- II Minor Violations. 1. Height pass not made/ available. 2. Unauthorized entry at height/ hazardous location. 3. Proper ladder/ steps not provided for descending. 4. Shuttering not done (below 2 Mtr level) of excavation. 5. Over hanging burden in pit not removed in excavation. 6. Power cable clamped with GI wires to post/ pillar. 7. Power cable tied on reinforced rod/ structure without proper insulation. 8. Loose connection taken from board without proper board plug. 9. Fitness certificate of cranes/ hydramoc/ heavy vehicles not available. 10. Crane rope conditions not OK. 11. Rope of crane not clamped properly. 12. Tyres of vehicle having patching/ bolting. 13. Not wearing safety helmet at site. 14. Working in slippers/ barefoot. 15. Hand gloves not used. 16. Gas cutting without goggle. 17. Rolling/ lifting of cylinder/ dragging on the ground (without cage). 18. Welding with non-standard holder. 19. Welding machine earthing not done (double body earthing). 20. Gas Hose Pipe clamping done by wires. 21. LPG cylinder date expired/ over. 22. Wet bags not put on gas cylinder. 23. Loading/ unloading of cylinder – cushion not given. 24. Condition of hose pipe not good. 25. Working with leaking cylinder. 26. Using non power cable instead of welding cable. 27. Working without work permit/ shut-down. 28. Not putting red flags/ stopper. 29. Dismantling ofstructure without authorized plan. 30. Unauthorized Oxygen tapping. 31. Working on NMDC installation without permission. 32. Not having proper gate passes/ other area passes. 33. Use of damaged slings/ tools/ ropes. 34. Hand grinders/ mixer machines without guard. 35. Not reporting of accident. 36. Taking shelter behind electrical panel. 37. Driving of heavy vehicles on the main road during restricted hours. 38. Parking at unauthorized place. 39. Truck side panel/ broken, not OK. 40. Dropping/ spillage of material on the road. 41. No number plate on the vehicle. 42. No indicator light/ brake light on vehicles. 43. Repeated Unsafe condition and Unsafe practice observed at site. (Repeated safety violations) III Major Violations 1. Using bamboo / or other non-standard material for scaffolding. 2. Railing not given at platforms or opening of floor. 3. Scaffolding planks not tied. 4. Throwing / dropping of material from height. 5. Proper ladder/ approach not given for working at height. 6. Walkway/ cross over path not provided. 7. No barricading of excavated pits. 8. No top cover on power distribution board. 9. Sleeping under truck. 10. Absence of supervisor at work site. 11. Welding screen not used. 12. Major Near Miss incidents due safety lapses, having serious potential safety risks. ₹ 7500/- IV High RiskViolations 1. Full body harness (FBH) not wearing. 2. Life line of FBH not anchoring. 3. Floor opening left unguarded in the area of work. 4. Working at roof without daily permit. 5. Major incidents and accidents due to safety lapses. 6. Lapses in LOTO compliance at site. 1 Vibration monitoring of High Critical Fort-nightly Nos. 600 (Quoted/Not-Quoted) 2 Vibration monitoring of Critical Monthly Nos. 516 (Quoted/Not-Quoted) 3 Vibration monitoring of SubCritical Bi-monthly Nos. 312 (Quoted/Not-Quoted) 4 Laser Aignment of equipment Nos. 25 (Quoted/Not-Quoted) 5 Thermography scanning of moving part Nos. 120 (Quoted/Not-Quoted) 6 Thermography scanning of Electric Panels Nos. 480 (Quoted/Not-Quoted) 7 Wear debries test(WDT) in every 3 month Nos. 232 (Quoted/Not-Quoted) 8 Hydraulic Oil Analysis Nos. 42 (Quoted/Not-Quoted) 9 Transformer Oil Analysis Nos. 36 (Quoted/Not-Quoted) 10 ESA of Crtical and High Capacity Motors Nos. 106 (Quoted/Not-Quoted) 11 NDT of thickness measurement Nos. 15 (Quoted/Not-Quoted) 12 NDT of UT scanning Nos. 15 (Quoted/Not-Quoted)

Key Value

Document Fees
Refer document
Tender Value
INR 54.15 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail