Tender For Interior Furnishing Works Supplying and fixing PLYWOOD partitions using aluminium section of size 2”x 1” frame work having 2’x2’ square grid on both sides covered with 8mm marine plywood of approved make and finished with 1.0mm thk lamination which is to be used as per the drawing mentioned. Partitions frame work to be fixed properly to the roof slab. A glazed door has to be provided as per the drawing with door closer and locks of Godrej make. Doors to be made out of 10mm thk glass with etching as per the design glass with etching has to be fixed on aluminium channel and the aluminium frame shall be covered with 8mm plywood with 1.0mm thk lamination which is to be used as per the drawing mentioned. The cost include 5” brass hinges (4 nos) and door handle as approved by architect. Door size 3’0”X 7’0”
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.