Tender For Construction Of 01 No. Of Staircase In Multipurpose Hall At Kisan Bazar Vibhuti Khand Gomti Nagar Lucknow. - Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil DSR 2.6.1 2 Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived fromnatural sources : 8 graded stone aggregate 40 mm nominalsize derived from natural sources)DSR 4.1.8 3 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)DSR 5.2.2 4 RCC work Providing and laying in position specified grade of reinforced cement concrete, Slab including the cost of centering, shuttering, finishing and excluding reinforcement - Above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone DSR 5.3 5 Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving balconies, shelves, chajjas, bands, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone). DSR 5.3 6 Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge.15.7.4 In cement mortar cum 2060.20 7 Class-150 (Non Modular) brick work in 1:6 cement and Coarse sandmortar for super structure above plinth level upto floor five levelincluding necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than12cm. DSR 6.4.2 8 6mm Celling plaster 1:3 (1 cement : 3 fine sand) cement & fine sand in F.M. not less than 1.25, 1:3 including chiping of RCC surface before ceiling plaster. The cost of including all material, labour T&P and scafolding etc. complete. DSR (13.16) 9 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. DSR 13.4.1 10 Finishing walls with exterior emulsionpaint (Apex) ofapproved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat ofprimer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. (DAR 13.47.1) 11 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 100 mm diameter 12 Mild steel or iron in plain work such as reinforced cement concrete or reinforced brick work (when not included in an overall rates), wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bends, hooks and authorized overlapping shall be measured upto floor two level. (SI NO 504) 13 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillarslaid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarsesand) and jointed with grey cement slurry mixed with pigment to matchthe shade of the slabs, including rubbing and polishing complete. sqm 2354.70 DSR 11.27 14 Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waistslab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fastenersetc.).DSR 10.28 15 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board constructionwith frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on bothfaces of shutters: 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screwsDSR9.21.1 16 13.80 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. sqm 156.05 17 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as perIS 1378) 100 mm each 32.55 DSR 9.66.2 18 Providing and fixing ISI marked Aluminium Tower bolt with nuts and Bolts.10mm and 200mm long Ch. 1 material Item No. 8 A (iv) 19 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dashfastener shall be paid for separately).Sal woodDSR 9.1.2 20 Providing and fixing ISI marked Aluminium Sliding bolt with nuts and Bolts 16 mm 300 mm long . Ch. 1 material Item No. 8 (b iii)
