|
| 1 | Item No. 1:- Removing grass , gazergrass and disposing off out of building premises including making clean the ground by shove land phavaras etc.complete. |
| 2 | Item No. 2:- The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains etc. complete |
| 3 | Item No. 3:- Providing and erecting chainlinkfencing 1.6M. height with G.I. chainlink of size 50x50mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S.Angles of 40 x 40 x 6 mm size , includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M.c/c with iron bar 16mm dia as holdfast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S.Angles at top and bottom of 25x25x5mm size and vertical M.S.flat 35x5mm and 25x5mm horizontal including cross support of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete As directed by Engineer in charge |
| 4 | Item No. 4:- Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles (50mm x 50mm x 6mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete of size 45x 45x 45cm, fastening the wire and painting the M.S.Angles with one coat of redlead primer and two coats of painting etc. complete. |
| 5 | Item No. 5:- Providing and fixing mild steel grill gate with angle iron frame 65mmx65mmx10mm with iron bars at 150 mm C/Canddiag on al flat sasper t he detailed drawing including hinges ,pivot block locking arrangement,welding riveting and oilpainting of three coats of approved shade Weight of gate 35 Kg/Smt. |
| 6 | Item No.6:-Providing and fixing sheet glass of 24 oz. for all size including putty etc. Complete |
| 7 | Item No. 7:-Providing and fixing fly proof meshs hutter toventilator /window using CCTW members of size 45x22 mm for frame work and 35x22 mm for middle support and fixing fly proof mesh on it and covering TW battens of size 20x10 mm including priming and two coats of oil painting to the new wood and steel work and all labour charges including all fixture and fastenings etc. complete |
| 8 | Item No. 8:-Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick asper drawing consisting of T.W. toprail size 100mmx25mm and bottom lockrail 200mmx25mm insert pannel 12mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin(GenerallyconfirmingtoISI3097) excluding frame, including stainlesssteel fixture and fastening and T.W. beading to junction sofpanelled inserts and as instructed by the Engineer in charge including 3 coats of oilpainting etc. complete. |
| 9 | Item No. 9:-Providing and fixing in required position skirting or dado of polished Kotah Stones lab 25mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. |
| 10 | Item No. 10:-Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring |
| 11 | Item No. 11:-Providing and fixing 10 cm C.I.Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. |
| 12 | Item No. 12:-Providing and fixing coloured glazed earthen ware lipped flat back/corner type urinal with PVC 5 liters flushing cistern with fittings, capacity with fittings, inlet pipe and stop tap, brackets for fixing the cistern, P.V.C. flush pipe with fittings including leads oilpipe, lead trap and soil pipe connection up to the outside face of the wall. |
| 13 | Item No. 13:-Providing and fixing white glazed earthenware Wash Hand Basin of 55 cm. x 40cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 14 | Item No. 14:-Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap,C.I.soil and vent pipe up to out side face of wall including 100 mm dia.C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer incharge. |
| 15 | Item No. 15:-Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622 /2006 (group DII -A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float , filling joint with white/colour cement slurry cleaningcuring etc. complete. |
| 16 | Item No. 16:-Providing and fixing on walls /ceiling /floors ,40 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg /meter with necessary fitting sand remaking good the demolished portion and applying primer of anti-corrosive oilpaint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 17 | Item No. 17:-Providing and fixing on walls/ceiling/floors 20 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93kg /meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint ,2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying andstacking the same in PWD chowky or as directed etc. complete |
| 18 | Item No. 18:-Providing and fixing 20 mm dia.screw down bib /stop tap of brass including necessary socket union nut complete. |
| 19 | Item No. 19:-Providing and fabricating structural steel work in rolled sections, fixed with connecting plates orangle cleats in main and cross beams, hip and jack rafters ,purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing inposition, making riveted /bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete. |
| 20 | Item No. 20:-Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 21 | Item No. 21:-Providing and fixing mild steel grill work for windows, ventilators, etc.15 kg /sqm as per drawing including fixtures necessary welding and painting with one coat of anti corrosive paint and two coats of oil painting complete. |
| 22 | Item No. 22:-Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations,grillageand footingsofR.C.C.columnsandsteelstanchions etc.includingbailingoutwater, Steel centeringformwork,laying/pumpingcoverblocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 23 | Item No. 23:-ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 24 | Item No. 24:-ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 25 | Item No. 25:-Providing and laying Cast in situ /Ready Mix cement concrete in M20 of trap /granite /quartzite /gneiss metal for bed blocks, foundation block sand such other items including bailing out water, Steel centering, formwork, laying /pumping, compacting ,roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete.The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only.New lylaid concrete shall becovered by gunny bag, plastic, tarpaulin etc .(Wooden centering will not be allowed.),with fully aut omatic microprocessor based PLC with SCADA enable dreversible Drum Typemixer /concrete Batchmix plant (Panmixer)etc.complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 26 | Item No. 26:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, removing grass and disposing etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means |
| 27 | Item No. 27:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 28 | Item No. 28:-Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding ,preparing the surfaces. (excluding the primer coat.) etc.complete. |
| 29 | Item No. 29:-Providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 30 | Item No. 30:-Providing and applying two coat soflead /zinc base oilpaint/bituminious paint of approved colour to news tructural steel work and iron work inbuildings including scaffolding if necessary ,cleaning and preparing the surface etc. complete. (excluding primer coat). |
| 31 | Item No. 31:-Providing and fixing copper strip 25mm wide and 3mm thick for lightening conductor including fixing with screws required scaffolding etc. complete Note-Lightening conductor and earthin fpits is not considered in this item |
| 32 | Item No. 32:-Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery upto destination hoisting and fixing of accessories such as inlet, outlet over flow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 33 | Item No. 33:-Providing and fixing 6mm thick ISI mark Asbestos Cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers , galvanised iron clamps, bolts ,nuts including scaffolding etc. complete. |
| 34 | Item No. 34:-Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for bothsides , deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S.Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar , suspension shaft of minimum 32 mm diameter, hood cover of M.S.sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and onecoat of red lead primer etc. complete.(I.S. 62481979) (Without mechanical gear) |
| 35 | Item No. 35:-Providing and fixing 45 cm wide mild steel ladder of 40 mm x 6 mm mild steel flat stringers and steps of 18 mm dia.mild steel bar for water tank including fixing it in (1:2:4)M-15 cement concrete block 60 cm x 30 cm x 30 cm and painting the ladder complete. (AntiCorossive Paint) |
| 36 | Item No. 36:-Providing pick and roll surface by picking the old WBM surface to the required standard, adding 30%of 40 mm size metal and required quantity of murum including laying sectioning, watering, compacting with static roller with thin layer of murum blindage on carrageway, watering and compacting by static roller, including cost of all materials, loading, unloading, stacking and labour etc. complete. Spec.No.: As directed by Engineer-in-charge. |
| 37 | Item No. 37:- Providing and constructing 75mm. thick Modified Penetration Macadam (MPM)road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100%crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @2Kg/sqm, spreading 12 mm. size chips compacting with three wheel static roller having weight 8 to 10MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 38 | Item No. 38:-OpenGraded Premix Surfacing Providing and Laying OGC 20 mm thickness composed of 13.2mm to 5.6 mm aggregates premixed with bituminous binder transported to sit ewith VTS,laid over apreviously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime/tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA,Paver and Vibratory roller( over mpm Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 39 | Item No. 39:-9 MM SEAL COAT: Providing and laying of Type A 9 mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @1.2 kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 40 | Item No. 40:-Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as perdirection of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification andPerformance for IRC 35:2015). |
| 41 | Item No 41:- Bore well Drilling work (including Transportation) (Includes 150 mm diameter reaming drilling work in soil/murrum strata and 115 mm diameter drilling work in hard rock (wet drilling) |
| 42 | Item No. 42:- Efficiency test by flushing (Air Lift Method) after completion of bore well with 90 degree “V” notch measurement (for half and hour |
| 43 | Item No. 43:-For 150 mm Diameter of D.T.H Borewell Drilling work, provide 180 mm Diameter 6 kg/cm2 PVC Casing Pipe (IS 4985-1988) |
| 44 | Item No. 44:-Supplying, erecting, testing and commissioning of minimum three & above star rated submersible pumpset of 1.5 kW/2 HP with 230 V, single phase, 50 Hz, A.C. supply suitable for 100 mm dia. borewell with 10 to 95 lpm discharge at 167 to 36 m head & discharge & delivery pipe of size-32 mm dia. with a necessary H type clamps as per specification no. WP-SMP. |
| 45 | Item No. 45:-Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 100MM thick in M-50 grade of approved size and shape for City streets and roads with high volume/ heavy traffice as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibratoretc. complete. |
