Providing Maintenance For Electrification And Essential Electrical Work At Various Community Toilet/Public Toilets In Ward No.2 (Year 2025-26)=Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW Supplying and erecting mains with 3x2,5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.l. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia, with PVC accessories on wall/ceiling as per specification No: WG-MA/CON, Wiring for plug on board with flush Switch socket, copper wiring and earthing as per specification No:WG-PW/SW Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places, as per specification No: WG-MA/BW Supplying and erecting flush type, shockproof plug socket 6 pin 6A and 16A with switch 16A combined unit erected on filled polypropylene board or double wooden block/3mm thick hylam sheet/ 4mm thick plywood pasted with 1,5 mm thick sunmica with S M screws and duly connected Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block/folded or screwed board with top of either wooden / 3 mm thick hylam sheet/4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected. Supplying and erecting shockproof 3 pin plug socket 16A with porcelain base/ flush type erected on filled polypropylene (IS:14772-2000) board or polished thick varnished double wooden block/folded or screwed board with top of either wooden/3 mm thick hylam sheet/4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected. Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. Supplying and erecting automatic control panel for 1 Ph, 230 volt, A.C. Submersible/centrifugal pump set up to 3 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc, for panel board or any other purpose with bending, cutting, drilling and welding complete erectedat the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. Supplying and erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base, Supplying and erecting minimum Three and above star rated submersible pump set of 1,5 KW/2 HP with 230 V, 50 c/s AC supply suita ble for 100 mm dia, borewell suitable for 30 to 300 LPM discharge at 50 to 20 m head and discharge and delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification No. WP-SMP Supplying and erecting fresh air cum exhaust fan of light duty 250 V A,C, 50 cycles 225mm, 1400 RPM rust proof body and blades, wire mesh, duly erected, complete. Supplying and erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBS total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/Gl frame (vertical busbar type) as per specification no. SW-SWR/MCBDB Supplying, erecting and marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying, erecting and marking DPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification no. EA-EP Supplying and erecting Gl strip of high purity required size used for earthing on wall and/or any other purpose with necessary Gl clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc, complete. Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc, including cutting, bending, drilling, welding, riveting etc, and painting with one coat of red lead paint and 2 coats of enamel paint, Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm, aluminium conductor complete erected with glands etc
