|
| 1 | Providing and fixing of M.S specials as per releventIS code with latest revision IS marked complete in all respect as per direction of Engineer-in-charge. |
| 2 | Supply, installing, testing and commissioning of 1600 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge |
| 3 | Supply, installing, testing and commissioning of 300 mm i/dDI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15plusEPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar |
| 4 | Providing of 250 micron to 1.5 mm polythene sheet of minimum 1000 gauge @228 gm/sqm minimum weight |
| 5 | Providing and fixing of Extra heavy duty FRP manhole cover with frame of size 840x990 mm of 10 Ton load bearing capacity |
| 6 | Providing stringing out, jointing, cutting, and testing of Spirally welded 1800 mm i/d M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries made up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight andchemically cured epoxy coating outside of min. thickness 0.275 mm andlaying the same including, jointing , cutting,weldingof the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per directionand satisfaction of Engineer-in-Charge |
| 7 | Providing stringing out, jointing, cutting, and testing of Spirally welded 1600 mm i/d M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries made up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight andchemically cured epoxy coating outside of min. thickness 0.275 mm andlaying the same including, jointing , cutting,weldingof the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per directionand satisfaction of Engineer-in-Charge |
| 8 | Laying 2000 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipmentJCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. |
| 9 | Laying 1500 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipmentJCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. |
| 10 | Supply, installing, testing and commissioning of 1800 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge |
| 11 | Supply, installing, testing and commissioning of 1200 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge |
| 12 | Supply, installing, testing and commissioning of 800 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge |
| 13 | Supply, installing, testing and commissioning of 800 mm i/d DI DF Metal Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: DI IS 1865 Gr 400/15: Wedge:DI IS 1865 Gr 400/15: Body and Wedge Rings: Bronze IS: 318 Gr LTB2 Spindle: SS AISI 410, Fasteners: CS, Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manaual/ Electric Actuator (AUMA/ROTORK/PNEUTORK/MARSH PNEUMATIC/ELOMATIC) make with integral Starter complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskarwith obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge. |
| 14 | Making connection in running water supply line and 1600-1200 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) |
| 15 | Making connection in running water supply line and 1600-800 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) |
| 16 | Supply, Installation, testing and commissioning of 1800 mm insertion type flow meter (for buried applications ) with RTU, GSM charges (for DLPplusOandM period), cabling and transfer of data to ICCC as per detailed specifications given in tender documents. Scope of work also included for required dewatering / usage of any crane/chain pulley etc |
| 17 | Making connection in running water supply line and 1600 mm to (250-300) mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) |
| 18 | Makin(50-150) mm connection in running water supply line and 1600 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately) |
| 19 | Supply, installing, testing and commissioning of 250 mm i/dDI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15plusEPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar |
| 20 | Supply, installing, testing and commissioning of 80 mm i/dDI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15plusEPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar |
| 21 | Supply, installing, testing and commissioning of 100 mm i/dDI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15plusEPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirlosk |
| 22 | Providing and fixing of 1800 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge. |
| 23 | Providing and fixing of 1600 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge. |
| 24 | Providing and fixing of 1200 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge. |
| 25 | Providing and fixing of 800 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge. |
| 26 | Providing and fixing of 300 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge. 300MM |
| 27 | Providing and fixing of 250 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge. |
| 28 | Providing and fixing of zero veocity of PN 1.6 rating of Make JASH/Jupitor Enginnering Co./ Venusincluding cost of carraige, loading, unloading, cutting and welding complete in all respect to the satisfaction of Engineer in charge. |
| 29 | Designing, Providing and installation of surge vesselsfor 1800 mm i/d pipeline for volume of 311MLD at WTP Basai. |
| 30 | Supply, installing, testing and commissioning of 1200 mm i/d DI DF Metal Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: DI IS 1865 Gr 400/15: Wedge:DI IS 1865 Gr 400/15: Body and Wedge Rings: Bronze IS: 318 Gr LTB2 Spindle: SS AISI 410, Fasteners: CS, Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manaual/ Electric Actuator (AUMA/ROTORK/PNEUTORK/MARSH PNEUMATIC/ELOMATIC) make with integral Starter complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskarwith obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge.: |
| 31 | Disposal of CandD waste from site of demolition/excvation to the nearest recycling plant of Municipal corporation including the cost of Carraige, loading and unloading, lead/liftof demolished/excavated material complete to the satisfaction of Engineer in charge |
