Tender For Construction Of Entrance Gate For Tilbhandeshwar Temple In Ward No. 51 Bhelupur - Demolishing by cement concrete manually/mechanical means including disposal of material within 50 metres lead as per direction of Engineer charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 3 Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In- Charge within a distance of 60 meters (1200 feet) 4 Earth work in excavation by mechanical means [lydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sam on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as disposal within a level of 50m. 5 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 6 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc complete. 7 1:3:6 (1 Cement: 3 coarse sand (zone-III) derived from 6 natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources). 8 RCC work in Rall Providing and laying in position specified grade of reinforced cement concrete, Slab 7 including the cost of centering, shuttering, finishing and excluding reinforcement below plinth level in 1:15:3 (1 cement: 1.5 coarse sand: 3 graded stane aggregate 30mm nominal size) 9 RCC work in Wall Providing and laying in position 8 specified grade of reinforced coment concrete, in 1:1.5.3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) 10 RCC work in slab Providing and laying in position specified grade of reinforced cement concrete, in 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stane aggregate 20 mm nominal size) 11 Steel reinforcement for R.C.C. work including 10 straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars of aracie Ee 5000 or more 12 Brick work M-150 in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all materiall, labour and tools and plants ect reared for proper completion of work. 13 12 mm cement plaster on plinth of mix: 1:4 (1 cement: 4 coarse sand, M. 1.25. 14 Providing and fixing dry cladding upto 10 metre height with 30 mm thick gang saw cut stone with machine cut edges of uniform colour and size upto Imxim, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work. stainless steel cramps and pins etc. shall be paid for separately). Red sand stane work for wall lining etc. 30 mm thick saw cut stone. 15 Providing and fixing expandable fasteners of specified 14 size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/BCC and making good.ele.complete 50 mm long. 16 Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuls, bolls and washer (total weight nol less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. 17 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement: 3 coarse sand), including 16 pointing in white cement morlar 1:2 (1 white cement: 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamber etc. 18 Taking out existing KERB STONE from footpath/central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-charge. 19 Providing & Laying 150x150 mm with thickness ranging from 70-90mm rough finish granite cobbles stone and shape of approved and complete as per direction of Engineer-in- Charge, including transport loading 18 unloading and conveyance of DARK BROWN cobbles granite from available source to work site. including labor charges for fixing the granite and pointing etc.. all complete as per direction of Engineer-in-charge. 20 Steel work welded in built up sections/ framed work. including cutting, hoisting, fixing in position and 19 applying a priming coat of approved steel primer using structural steel etc, as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
